void-packages/xbps-src/xbps-src.sh.in

492 lines
12 KiB
Bash

#!/bin/sh
#
# Copyright (c) 2008-2011 Juan Romero Pardines.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#-
: ${XBPS_CONFIG_FILE:=@@XBPS_INSTALL_ETCDIR@@/xbps-src.conf}
: ${progname:=$(basename $0)}
: ${fakeroot_cmd:=/usr/bin/fakeroot}
: ${fakeroot_cmd_args:=--}
: ${sudo_cmd:=sudo}
: ${chroot_cmd:=chroot}
: ${xbps_machine:=$(uname -m)}
# Required utilities in host system.
REQHOST_UTILS="gawk bash sed gcc msgfmt patch makeinfo perl fakeroot tar xz"
check_reqhost_utils()
{
[ -n "$IN_CHROOT" ] && return 0
for f in ${REQHOST_UTILS}; do
if ! command -v ${f} 2>&1 >/dev/null; then
echo "${f} is missing in your system, can't continue! exiting..."
exit 1
fi
done
}
usage()
{
cat << _EOF
$progname: [-CDhKS] [-c <file>] [-m <dir>] [-p <dir>] [-s <dir>] <target> [<pkgname>]
Targets:
bootstrap
Build and install from source the bootstrap packages
into <masterdir>.
build [pkgname]
Build package source (fetch + extract + configure + build).
build-pkg [pkgname|all]
Build a binary package from <pkgname> or all packages if <all>
is specified. Package must be installed into destination directory.
checkvers
Checks installed package versions in <masterdir>
against srcpkgs for new available versions.
chroot
Enter to the chroot in <masterdir>.
clean [pkgname]
Remove <pkgname> build directory.
configure [pkgname]
Configure a package (fetch + extract + configure).
extract [pkgname]
Extract package source distribution file(s) into the build directory.
By default set to <masterdir>/pkg-builddir.
fetch [pkgname]
Download package source distribution file(s).
info [pkgname]
Show information for the specified package.
install [pkgname]
Installs a package into destination directory and \`stows' its
files into <masterdir>. If a package is not from bootstrap group,
its files will be symlinked rather than copied.
list
List installed packages in <masterdir>.
list-files <pkgname>
List package files from <pkgname>.
make-repoidx
Build a package index for the local repository associated with
the master directory <masterdir>. By default set to
<masterdir>/pkg-binpkgs. To specify another repo, use -p <dir>.
remove [pkgname]
Remove package completely from <destdir> and <masterdir>.
stow [pkgname]
Stow <pkgname> files from <destdir> into <masterdir> and register
package in database. When a package is \`stown', its files will
be available in <masterdir>, and other packages will be able to
depend on it.
unstow [pkgname]
Remove <pkgname> files from <masterdir> and unregister package
from database.
On targets that accept [pkgname], a package name can be specified and xbps-src
will execute the task on any CWD (Current Working Directory). If the argument
is omitted xbps-src assumes that CWD is in the target package. Example:
$ cd srcpkgs/libX11 && xbps-src install
$ xbps-src install libX11
Both ways are equivalent.
Options:
-C Do not remove build directory after successful installation.
-c Path to global configuration file:
if not specified @@XBPS_INSTALL_ETCDIR@@/xbps-src.conf is used.
-D Only install <pkgname> to package's destination directory set
to <masterdir>/pkg-destdir/<pkgname>-<version>.
-h Usage output.
-K Do not remove automatic package dependencies while building
or installing a package with XBPS_PREFER_BINPKG_DEPS enabled.
-m Master directory, overwritting the value set in the configuration
file xbps-src.conf.
-p Local packages repository, overwritting default path at
<masterdir>/pkg-binpkgs.
-S Overrides and disables XBPS_PREFER_BINPKG_DEPS even if it was
set in the configuration file xbps-src.conf.
it was set in the configuration file.
-s Source distribution files directory, overwritting default path at
<masterdir>/pkg-srcdistdir.
_EOF
}
basename_cwd()
{
echo $(basename $(pwd))
}
check_path()
{
eval local orig="$1"
case "$orig" in
/) ;;
/*) orig="${orig%/}" ;;
*) orig="$(pwd)/${orig%/}" ;;
esac
path_fixed="$orig"
}
run_file()
{
local file="$1"
check_path "$file"
. $path_fixed
}
check_config_vars()
{
local val cffound f cfpaths cf="xbps-src.conf"
if [ -z "$XBPS_CONFIG_FILE" ]; then
cfpaths="@@XBPS_INSTALL_PREFIX@@/etc/${cf} ./etc/${cf}"
for f in $cfpaths; do
if [ -f ${f} ]; then
XBPS_CONFIG_FILE=${f}
cffound=yes
break
fi
done
[ -z "$cffound" ] && msg_error "cannot find a config file\n"
fi
run_file ${XBPS_CONFIG_FILE}
export XBPS_CONFIG_FILE=$path_fixed
if [ ! -f "$XBPS_CONFIG_FILE" ]; then
msg_error "cannot find configuration file: $XBPS_CONFIG_FILE\n"
fi
for f in XBPS_DISTRIBUTIONDIR XBPS_MASTERDIR; do
eval val="\$${f}"
if [ -z "$val" ]; then
msg_error "'${f}' not set in configuration file!\n"
fi
done
if [ ! -d "$XBPS_MASTERDIR" ]; then
mkdir -p "$val"
if [ $? -ne 0 ]; then
msg_error "couldn't create 'XBPS_MASTERDIR' directory\n"
fi
fi
[ -z "${_MASTERDIR_FLAG}" ] && export _MASTERDIR="$XBPS_MASTERDIR"
}
#
# main()
#
while getopts "Cc:DhKm:p:Ss:" opt; do
case $opt in
C) export KEEP_WRKSRC=1;;
c) XBPS_CONFIG_FILE="$OPTARG";;
D) export DESTDIR_ONLY_INSTALL=1;;
h) usage && exit 0;;
K) export KEEP_AUTODEPS=1;;
m)
_MASTERDIR_FLAG=1
_MASTERDIR="$OPTARG"
if [ ! -d ${_MASTERDIR} ]; then
mkdir -p ${_MASTERDIR}
fi
;;
p)
_PACKAGEDIR="$OPTARG"
if [ ! -d ${_PACKAGEDIR} ]; then
mkdir -p ${_PACKAGEDIR}/${xbps_machine}
mkdir -p ${_PACKAGEDIR}/noarch
fi
;;
S) UNSET_PREFER_BINPKG_DEPS=1;;
s) export XBPS_SRCDISTDIR="$OPTARG";;
--) shift; break;;
esac
done
shift $(($OPTIND - 1))
[ $# -eq 0 -o $# -gt 2 ] && usage && exit 1
target="$1"
_pkgname="$2"
if [ -z "$target" ]; then
echo "=> ERROR: missing target."
usage && exit 1
fi
if [ -n "$IN_CHROOT" ]; then
XBPS_CONFIG_FILE="/usr/local/etc/xbps-src.conf"
fi
#
# Check configuration vars before anyting else, and set defaults vars.
#
check_config_vars
if [ -n "${_MASTERDIR}" ]; then
export XBPS_MASTERDIR=${_MASTERDIR}
fi
. @@XBPS_INSTALL_SHAREDIR@@/shutils/init_funcs.sh
set_defvars
for f in $(echo @@XBPS_INSTALL_SHAREDIR@@/shutils/*.sh); do
if [ -r "$f" -a "$(basename $f)" != "chroot.sh" ]; then
. $f
fi
done
# Disable XBPS_PREFER_BINPKG_DEPS if requested.
[ -n "$UNSET_PREFER_BINPKG_DEPS" ] && unset XBPS_PREFER_BINPKG_DEPS
#
# Check for required utilities in host system.
#
check_reqhost_utils
#
# Fix up some vars when XBPS_USE_CAPABILITIES is set.
#
if [ -n "$XBPS_USE_CAPABILITIES" ]; then
chroot_cmd="@@XBPS_INSTALL_LIBEXECDIR@@/xbps-src-capchroot"
unset sudo_cmd
fi
if [ "$(id -u)" -eq 0 ]; then
# disable sudo and fakeroot if uid==0
chroot_cmd="chroot"
unset sudo_cmd
if [ -n "$IN_CHROOT" ]; then
unset fakeroot_cmd
unset fakeroot_cmd_args
fi
fi
#
# Sanitize PATH.
#
if [ -z "$IN_CHROOT" ]; then
# In non chroot case always prefer host tools.
MYPATH="$XBPS_MASTERDIR/bin:$XBPS_MASTERDIR/usr/bin:$PATH"
MYPATH="$XBPS_MASTERDIR/usr/local/bin:$MYPATH"
MYPATH="$XBPS_MASTERDIR/usr/local/sbin:$MYPATH"
else
if [ -n "$XBPS_CCACHE" ]; then
CCACHEPATH="/usr/lib/ccache/bin"
fi
# In chroot always prefer tools from bootstrap.
MYPATH="$CCACHEPATH:/tools/bin:/usr/local/sbin:/bin:/usr/bin"
MYPATH="$MYPATH:/sbin:/usr/local/bin:/usr/sbin"
fi
export PATH="$MYPATH"
#
# If masterdir is ready (base-chroot installed and chroot set up) and
# XBPS_PREFER_BINPKG_DEPS enabled, force ignoring rules to handle
# bootstrap packages.
#
if [ -n "$DESTDIR_ONLY_INSTALL" -a -n "$XBPS_PREFER_BINPKG_DEPS" \
-a -f "$XBPS_MASTERDIR/.xbps_perms_done" ]; then
export BOOTSTRAP_PKG_REBUILD=1
fi
#
# Main switch.
#
case "$target" in
bootstrap)
[ ! -d $XBPS_SRCPKGDIR/base-chroot ] && \
msg_error "Cannot find $XBPS_SRCPKGDIR/base-chroot directory!\n"
cd $XBPS_SRCPKGDIR/base-chroot && _ORIGINPKG="$(basename_cwd)"
setup_tmpl ${_ORIGINPKG} && install_pkg $pkgname
;;
build|configure)
if [ -z "${_pkgname}" ]; then
[ ! -r ./template ] && msg_error "missing build template in $(pwd).\n"
. ./template
_pkgname=$(basename_cwd)
fi
if [ -z "$bootstrap" -a -z "$IN_CHROOT" ]; then
. $XBPS_SHUTILSDIR/chroot.sh
xbps_chroot_handler $target ${_pkgname}
else
_ORIGINPKG="${_pkgname}"
setup_tmpl ${_ORIGINPKG}
# If pkg has dependencies, install them first.
install_dependencies_pkg "$pkgname-$version"
if [ $? -ne 0 ]; then
msg_red "cannot install required deps for $pkgname.\n"
exit 1
fi
# All deps were installed, continue with the origin pkg...
setup_tmpl ${_ORIGINPKG}
fetch_distfiles
if [ ! -f "$XBPS_EXTRACT_DONE" ]; then
extract_distfiles
fi
if [ "$target" = "configure" ]; then
configure_src_phase
else
if [ ! -f "$XBPS_CONFIGURE_DONE" ]; then
configure_src_phase
fi
build_src_phase
fi
fi
;;
build-pkg)
if [ -n "${_PACKAGEDIR}" ]; then
export XBPS_PACKAGESDIR=${_PACKAGEDIR}
fi
if [ "$2" = "all" ]; then
for f in $($XBPS_BIN_CMD list|awk '{print $1}'); do
pkg=$(${XBPS_PKGDB_CMD} getpkgname $f)
setup_tmpl $pkg
if [ "${pkg}" = "${sourcepkg}" ]; then
xbps_make_binpkg
fi
done
else
if [ -z "${_pkgname}" ]; then
[ ! -r ./template ] && msg_error "missing build template in $(pwd).\n"
_pkgname=$(basename_cwd)
fi
setup_tmpl ${_pkgname}
xbps_make_binpkg
fi
;;
checkvers)
check_installed_packages
;;
chroot)
. $XBPS_SHUTILSDIR/chroot.sh
xbps_chroot_handler chroot dummy
;;
clean)
if [ -z "${_pkgname}" ]; then
[ ! -r ./template ] && msg_error "missing build template in $(pwd).\n"
_pkgname=$(basename_cwd)
fi
setup_tmpl ${_pkgname}
remove_tmpl_wrksrc $wrksrc
;;
extract|fetch|info)
if [ -z "${_pkgname}" ]; then
[ ! -r ./template ] && msg_error "missing build template in $(pwd).\n"
_pkgname=$(basename_cwd)
fi
setup_tmpl ${_pkgname}
if [ "$target" = "info" ]; then
info_tmpl
exit $?
fi
fetch_distfiles $update_checksum
extract_distfiles
;;
install)
if [ -z "${_pkgname}" ]; then
[ ! -r ./template ] && msg_error "missing build template in $(pwd).\n"
_pkgname=$(basename_cwd)
fi
setup_tmpl ${_pkgname}
_ORIGINPKG="${_pkgname}"
if [ -z "$IN_CHROOT" -a -z "$bootstrap" ]; then
. $XBPS_SHUTILSDIR/chroot.sh
xbps_chroot_handler $target ${_ORIGINPKG}
else
setup_tmpl ${_ORIGINPKG}
install_pkg $pkgname
fi
;;
list|list-files)
if [ "$target" = "list" ]; then
$XBPS_BIN_CMD list
else
list_pkg_files $2
fi
;;
make-repoidx)
if [ -n "${_PACKAGEDIR}" ]; then
export XBPS_PACKAGESDIR=${_PACKAGEDIR}
fi
echo "=> Updating package index for local repository at"
echo " $XBPS_PACKAGESDIR..."
[ ! -d "$XBPS_PACKAGESDIR/$(uname -m)" ] && \
mkdir -p "$XBPS_PACKAGESDIR/$(uname -m)"
${XBPS_REPO_CMD} genindex ${XBPS_PACKAGESDIR} 2>/dev/null
[ $? -eq 0 ] && echo "=> done."
;;
remove)
if [ -z "${_pkgname}" ]; then
[ ! -r ./template ] && msg_error "missing build template in $(pwd).\n"
_pkgname=$(basename_cwd)
fi
setup_tmpl ${_pkgname}
if [ -z "$IN_CHROOT" -a -z "$bootstrap" ]; then
. $XBPS_SHUTILSDIR/chroot.sh
xbps_chroot_handler $target ${_pkgname}
else
remove_pkg
fi
;;
stow)
stow_flag=yes
if [ -z "${_pkgname}" ]; then
[ ! -r ./template ] && msg_error "missing build template in $(pwd).\n"
_pkgname=$(basename_cwd)
fi
setup_tmpl ${_pkgname}
stow_pkg_handler stow
;;
unstow)
if [ -z "${_pkgname}" ]; then
[ ! -r ./template ] && msg_error "missing build template in $(pwd).\n"
_pkgname=$(basename_cwd)
fi
setup_tmpl ${_pkgname}
stow_pkg_handler unstow
;;
*)
msg_red "xbps-src: invalid target $target.\n"
usage && exit 1
esac
# Agur
exit $?