void-packages/xbps-src/shutils/metadata.sh

420 lines
12 KiB
Bash

#-
# Copyright (c) 2008-2011 Juan Romero Pardines.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#-
xbps_write_metadata_pkg()
{
local subpkg spkgrev
for subpkg in ${subpackages}; do
if [ -n "${revision}" ]; then
spkgrev="${subpkg}-${version}_${revision}"
else
spkgrev="${subpkg}-${version}"
fi
check_installed_pkg ${spkgrev}
if [ $? -eq 0 -a -z "$DESTDIR_ONLY_INSTALL" ]; then
continue
fi
if [ ! -f $XBPS_SRCPKGDIR/${sourcepkg}/${subpkg}.template ]; then
msg_error "Cannot find subpkg '${subpkg}' build template!\n"
fi
setup_tmpl ${sourcepkg}
unset run_depends conf_files noarch triggers replaces \
revision openrc_services system_accounts system_groups \
preserve keep_empty_dirs xml_entries sgml_entries \
xml_catalogs sgml_catalogs gconf_entries gconf_schemas \
gtk_iconcache_dirs font_dirs dkms_modules provides \
kernel_hooks_version conflicts pycompile_dirs \
pycompile_module systemd_services
. $XBPS_SRCPKGDIR/${sourcepkg}/${subpkg}.template
pkgname=${subpkg}
set_tmpl_common_vars
verify_rundeps ${DESTDIR}
xbps_write_metadata_pkg_real
done
if [ "$build_style" = "meta-template" -a -z "${run_depends}" ]; then
for spkg in ${subpackages}; do
if [ -n "${revision}" ]; then
spkgrev="${spkg}-${version}_$revision"
else
spkgrev="${spkg}-${version}"
fi
run_depends="${run_depends} ${spkgrev}"
done
fi
setup_tmpl ${sourcepkg}
# Verify pkg deps.
verify_rundeps ${DESTDIR}
xbps_write_metadata_pkg_real
}
#
# This function writes the metadata files into package's destdir,
# these will be used for binary packages.
#
xbps_write_metadata_pkg_real()
{
local metadir=${DESTDIR}/var/db/xbps/metadata/$pkgname
local f i j found arch dirat lnkat newlnk lver TMPFLIST TMPFPLIST
local fpattern="s|${DESTDIR}||g;s|^\./$||g;/^$/d"
if [ ! -d "${DESTDIR}" ]; then
msg_error "$pkgname not installed into destdir.\n"
fi
if [ -n "$noarch" ]; then
arch=noarch
else
arch=$xbps_machine
fi
if [ -n "$revision" ]; then
lver="${version}_${revision}"
else
lver="${version}"
fi
#
# Find out if this package contains info files and compress
# all them with gzip.
#
if [ -f ${DESTDIR}/usr/share/info/dir ]; then
# Always remove this file if curpkg is not texinfo.
if [ "$pkgname" != "texinfo" ]; then
[ -f ${DESTDIR}/usr/share/info/dir ] && \
rm -f ${DESTDIR}/usr/share/info/dir
fi
# Add info-files trigger.
triggers="info-files $triggers"
msg_normal "$pkgver: processing info(1) files...\n"
find ${DESTDIR}/usr/share/info -type f -follow | while read f
do
j=$(echo "$f"|sed -e "$fpattern")
[ "$j" = "" ] && continue
[ "$j" = "/usr/share/info/dir" ] && continue
# Ignore compressed files.
if $(echo "$j"|grep -q '.*.gz$'); then
continue
fi
# Ignore non info files.
if ! $(echo "$j"|grep -q '.*.info$') && \
! $(echo "$j"|grep -q '.*.info-[0-9]*$'); then
continue
fi
if [ -h ${DESTDIR}/"$j" ]; then
dirat=$(dirname "$j")
lnkat=$(readlink ${DESTDIR}/"$j")
newlnk=$(basename "$j")
rm -f ${DESTDIR}/"$j"
cd ${DESTDIR}/"$dirat"
ln -s "${lnkat}".gz "${newlnk}".gz
continue
fi
echo " Compressing info file: $j..."
gzip -q9 ${DESTDIR}/"$j"
done
fi
#
# Find out if this package contains manual pages and
# compress all them with gzip.
#
if [ -d "${DESTDIR}/usr/share/man" ]; then
msg_normal "$pkgver: processing manual pages...\n"
find ${DESTDIR}/usr/share/man -type f -follow | while read f
do
j=$(echo "$f"|sed -e "$fpattern")
[ "$j" = "" ] && continue
if $(echo "$j"|grep -q '.*.gz$'); then
continue
fi
if [ -h ${DESTDIR}/"$j" ]; then
dirat=$(dirname "$j")
lnkat=$(readlink ${DESTDIR}/"$j")
newlnk=$(basename "$j")
rm -f ${DESTDIR}/"$j"
cd ${DESTDIR}/"$dirat"
ln -s "${lnkat}".gz "${newlnk}".gz
continue
fi
echo " Compressing manpage: $j..."
gzip -q9 ${DESTDIR}/"$j"
done
fi
# Write the files.plist file.
TMPFLIST=$(mktemp -t flist.XXXXXXXXXX) || exit 1
TMPFPLIST=$(mktemp -t fplist.XXXXXXXXXX) || exit 1
msg_normal "$pkgver: creating package metadata...\n"
cat > "$TMPFPLIST" <<_EOF
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
_EOF
# Pass 1: add links.
echo "<key>links</key>" >> $TMPFPLIST
echo "<array>" >> $TMPFPLIST
find ${DESTDIR} -type l | while read f
do
j=$(echo "$f"|sed -e "$fpattern")
[ "$j" = "" ] && continue
echo "$j" >> $TMPFLIST
echo "<dict>" >> $TMPFPLIST
echo "<key>file</key>" >> $TMPFPLIST
echo "<string>$j</string>" >> $TMPFPLIST
echo "<key>target</key>" >> $TMPFPLIST
lnk=$(readlink -f "$f"|sed -e "s|${DESTDIR}||")
if [ -z "$lnk" -o "$lnk" = "" ]; then
lnk=$(readlink "$f"|sed -e "s|${DESTDIR}||")
fi
echo "<string>$lnk</string>" >> $TMPFPLIST
echo "</dict>" >> $TMPFPLIST
done
echo "</array>" >> $TMPFPLIST
# Pass 2: add regular files.
echo "<key>files</key>" >> $TMPFPLIST
echo "<array>" >> $TMPFPLIST
find ${DESTDIR} -type f | while read f
do
j=$(echo "$f"|sed -e "$fpattern")
[ "$j" = "" ] && continue
echo "$j" >> $TMPFLIST
# Skip configuration files.
for i in ${conf_files}; do
[ "$j" = "$i" ] && found=1 && break
done
[ -n "$found" ] && unset found && continue
echo "<dict>" >> $TMPFPLIST
echo "<key>file</key>" >> $TMPFPLIST
echo "<string>$j</string>" >> $TMPFPLIST
echo "<key>sha256</key>" >> $TMPFPLIST
echo "<string>$(${XBPS_DIGEST_CMD} "$f")</string>" \
>> $TMPFPLIST
echo "</dict>" >> $TMPFPLIST
done
echo "</array>" >> $TMPFPLIST
# Pass 3: add directories.
echo "<key>dirs</key>" >> $TMPFPLIST
echo "<array>" >> $TMPFPLIST
find ${DESTDIR} -type d|sort -ur | while read f
do
j=$(echo "$f"|sed -e "$fpattern")
[ "$j" = "" ] && continue
echo "$j" >> $TMPFLIST
echo "<dict>" >> $TMPFPLIST
echo "<key>file</key>" >> $TMPFPLIST
echo "<string>$j</string>" >> $TMPFPLIST
echo "</dict>" >> $TMPFPLIST
done
echo "</array>" >> $TMPFPLIST
# Add configuration files into its own array.
if [ -n "${conf_files}" ]; then
echo "<key>conf_files</key>" >> $TMPFPLIST
echo "<array>" >> $TMPFPLIST
for f in ${conf_files}; do
i=${DESTDIR}/"${f}"
[ ! -f "${i}" ] && continue
echo "<dict>" >> $TMPFPLIST
echo "<key>file</key>" >> $TMPFPLIST
echo "<string>$f</string>" >> $TMPFPLIST
echo "<key>sha256</key>" >> $TMPFPLIST
echo "<string>$(${XBPS_DIGEST_CMD} "${i}")</string>" \
>> $TMPFPLIST
echo "</dict>" >> $TMPFPLIST
done
echo "</array>" >> $TMPFPLIST
fi
echo "</dict>" >> $TMPFPLIST
echo "</plist>" >> $TMPFPLIST
sed -i -e /^$/d $TMPFLIST
# Write the props.plist file.
local TMPFPROPS=$(mktemp -t fprops.XXXXXXXXXX) || exit 1
local instsize=$(du -sk ${DESTDIR}|awk '{print $1}')
cat > $TMPFPROPS <<_EOF
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>pkgname</key>
<string>$pkgname</string>
<key>version</key>
<string>$lver</string>
<key>pkgver</key>
<string>$pkgver</string>
<key>architecture</key>
<string>$arch</string>
<key>installed_size</key>
<integer>$(($instsize * 1024))</integer>
<key>maintainer</key>
<string>$(echo $maintainer|sed -e 's|<|\&lt;|g;s|>|\&gt;|g')</string>
<key>short_desc</key>
<string>$short_desc</string>
<key>long_desc</key>
<string>$long_desc</string>
_EOF
#
# If package sets $dkms_modules, add dkms rundep.
#
if [ -n "$dkms_modules" ]; then
Add_dependency run dkms
fi
#
# If package sets $openrc_services, add the OpenRC rundep.
#
if [ -n "$openrc_services" ]; then
Add_dependency run OpenRC
fi
#
# If package sets $system_accounts or $system_groups, add shadow rundep.
#
if [ -n "$system_accounts" -o -n "$system_groups" ]; then
Add_dependency run shadow
fi
# pkg needs to preserve its files after removal/upgrade?
if [ -n "$preserve" ]; then
echo "<key>preserve</key>" >> $TMPFPROPS
echo "<true/>" >> $TMPFPROPS
fi
# Dependencies
if [ -n "$run_depends" ]; then
echo "<key>run_depends</key>" >> $TMPFPROPS
echo "<array>" >> $TMPFPROPS
for f in ${run_depends}; do
echo "<string>$(echo $f|sed "s|<|\&lt;|g;s|>|\&gt;|g")</string>" >> $TMPFPROPS
done
echo "</array>" >> $TMPFPROPS
fi
# Configuration files
if [ -n "$conf_files" ]; then
echo "<key>conf_files</key>" >> $TMPFPROPS
echo "<array>" >> $TMPFPROPS
for f in ${conf_files}; do
echo "<string>$f</string>" >> $TMPFPROPS
done
echo "</array>" >> $TMPFPROPS
fi
# Replace package(s).
if [ -n "$replaces" ]; then
echo "<key>replaces</key>" >> $TMPFPROPS
echo "<array>" >> $TMPFPROPS
for f in ${replaces}; do
echo "<string>$(echo $f|sed "s|<|\&lt;|g;s|>|\&gt;|g")</string>" >> $TMPFPROPS
done
echo "</array>" >> $TMPFPROPS
fi
# Conflicting package(s).
if [ -n "$conflicts" ]; then
echo "<key>conflicts</key>" >> $TMPFPROPS
echo "<array>" >> $TMPFPROPS
for f in ${conflicts}; do
echo "<string>$(echo $f|sed "s|<|\&lt;|g;s|>|\&gt;|g")</string>" >> $TMPFPROPS
done
echo "</array>" >> $TMPFPROPS
fi
# Provides virtual package(s).
if [ -n "$provides" ]; then
echo "<key>provides</key>" >> $TMPFPROPS
echo "<array>" >> $TMPFPROPS
for f in ${provides}; do
echo "<string>$(echo $f|sed "s|<|\&lt;|g;s|>|\&gt;|g")</string>" >> $TMPFPROPS
done
echo "</array>" >> $TMPFPROPS
fi
# Build date.
echo "<key>build_date</key>" >> $TMPFPROPS
echo "<string>$(LANG=C date -u "+%A %d %B, %Y, %T UTC")</string>" >> $TMPFPROPS
# Homepage
if [ -n "$homepage" ]; then
echo "<key>homepage</key>" >> $TMPFPROPS
echo "<string>$homepage</string>" >> $TMPFPROPS
fi
# License
if [ -n "$license" ]; then
echo "<key>license</key>" >> $TMPFPROPS
echo "<string>$license</string>" >> $TMPFPROPS
fi
# Terminate the property list file.
echo "</dict>" >> $TMPFPROPS
echo "</plist>" >> $TMPFPROPS
if [ ! -d $metadir ]; then
mkdir -p $metadir >/dev/null 2>&1
if [ $? -ne 0 ]; then
msg_red "you don't have enough perms for this!\n"
rm -f $TMPFLIST $TMPFPROPS
exit 1
fi
fi
# Write metadata files and cleanup.
if [ -s $TMPFLIST ]; then
mv -f $TMPFLIST $metadir/flist
else
rm -f $TMPFLIST
fi
mv -f $TMPFPLIST ${DESTDIR}/files.plist
mv -f $TMPFPROPS ${DESTDIR}/props.plist
{ \
$XBPS_PKGDB_CMD sanitize-plist ${DESTDIR}/files.plist; \
$XBPS_PKGDB_CMD sanitize-plist ${DESTDIR}/props.plist; \
chmod 644 ${DESTDIR}/files.plist ${DESTDIR}/props.plist; \
[ -f $metadir/flist ] && chmod 644 $metadir/flist; \
\
#
# Create the INSTALL/REMOVE scripts if package uses them
# or uses any available trigger.
#
xbps_write_metadata_scripts_pkg install; \
xbps_write_metadata_scripts_pkg remove; \
} || return $?
msg_normal "$pkgver: successfully created package metadata.\n"
}