void-packages/xbps-src/README

242 lines
8.7 KiB
Text

xbps-src - building packages from source
========================================
Introduction
------------
`xbps-src` is the utility used by the _X binary package system_ to build
binary packages from source distribution files. A root directory (`srcpkgs`)
contains multiple subdirs, each one to build a package as its name
indicates. The following directory structure illustrates it:
+
.................................
xbps-templates/
|
|-----srcpkgs/
|
|-----binutils/
|-----gcc/
|-----glibc/
..................................
A package subdirectory always has a `template` file, that are the
specifications to download and build the binary package from its source files.
Additionally some packages may have additional subdirs on it: `files`
and `patches`. The `files` subdir may contain configuration files, or
any other file required to build the package. The `patches` subdir contains
patches that are applied to the source before building.
+
Some packages may provide `subpackages`; they are different binary packages
that are built from the same source package. Each `subpackage` in the directory
structure (as shown above) is a symlink to the `real` package subdir, like this:
+
....................................
srcpkgs/
|
|-----gcc/
|-----libgomp -> gcc
|-----libmudflap -> gcc
|-----libstdc++ -> gcc
....................................
Each subpackage uses its own `template` build file that is contained in
the `real` package subdir, and they have exactly the same name than the
symlink pointing to the `real` package subdir. The following example
illustrates the structure used by the _udev_ package in the filesystem:
+
.......................................
srcpkgs/
|
|-----libgudev-devel -> udev
|-----libgudev -> udev
|-----libudev-devel -> udev
|-----libudev -> udev
|-----udev/
|----template
|----libgudev-devel.template
|----libgudev.template
|----libudev-devel.template
|----libudev.template
.......................................
+
Subpackages use a reduced version of the main `template` build file, because
the build and main install process is all done in the real `template` file.
Usually those `<subpkg>.template` files only move files and directories
to the `subpackage` destination directory, so they are always smaller.
Requirements
------------
The following software is required in the host system to install xbps-src
and its helpers:
- GCC, make, sed and libcap (depelopment package and setcap(8) command).
To build binary packages with xbps-src also the following software needs
to be installed into the host system:
- awk, bash, gcc c++, gettext, patch, texinfo, perl and fakeroot.
- xbps static utilities, available from http://code.google.com/p/xbps.
(use the latest available stable version) or
'xbps-bin -y install xbps-static' if using Void GNU/Linux.
Additionally if you want to work as 'root':
- sudo
Starting up
-----------
Firstly you'll have to download the `git` repository that contains `xbps-src`
and the build template files. To clone it with `git` use:
-----------------------------------------------------------------
$ git clone https://code.google.com/p/xbps.packages xbps-packages
-----------------------------------------------------------------
`xbps-src` and its shell utilities need to be installed in a directory
for correct operation, that is accomplished by issuing:
--------------------------------------------------
$ cd xbps-packages/xbps-src && make install clean
--------------------------------------------------
This will install all files into `/usr/local` by default, can be changed
by specifying `PREFIX` and `DESTDIR` to make(1).
Building packages from source
-----------------------------
`xbps-src` always look for a `template` file in current directory, that's what
it specifies the package build definitions and such. The build templates
are located in the `srcpkgs` directory, you should change the cwd to the
directory matching the package that you want to work on, i.e for binutils,
its directory is `srcpkgs/binutils`.
+
+
If configuration file is not specified from the command line with the
`-c` flag, it will first try to use the default location at
`/usr/local/etc/xbps-src.conf` (or the installation prefix that was specified
to the make(1) command), and as last resort in the etc directory of the
current directory.
+
+
To avoid problems with libtool and configure scripts finding stuff that is
available in the host system, almost all packages must be built inside of a
chroot. So the first thing would be to create the required set of packages
that will be used in the chroot:
----------------------------------------------------------------
$ xbps-src bootstrap
----------------------------------------------------------------
This will build all required packages via fakeroot in masterdir, therefore you
can run it as normal user. Once 'xbps-src-chroot' has been built and installed
into the 'masterdir' all packages will be built inside of the chroot.
+
+
'xbps-src' supports building packages in the chroot with your normal user,
thanks to the *POSIX.1e Capabilities* support in the Linux kernel. To use this
the target filesystem must support *extended attributes*; right now they
are supported on almost all Linux filesytems, such as *ext2*, *ext3*, *ext4*,
*xfs*, and others. This option is enabled by default in *xbps-src.conf*.
+
+
I believe it's the most easier and faster way to handle clean dependencies;
another reason would be that xbps packages are meant to be used in a system and
not just for ordinary users. So once all packages are built, you can create and
enter to the chroot with:
----------------------
$ xbps-src chroot
----------------------
Press Control + D to exit from the chroot. The following targets will require
to be done in the chroot (_once base-chroot is installed_):
*build, configure, install and install-destdir*.
+
+
Now let's explain some more about the targets that you can use. To start
installing packages you should use the install target, all source packages
are located in the `srcpkgs` directory, so to install glib:
------------------------------------------
$ cd srcpkgs/<pkgname> && xbps-src install
------------------------------------------
If the package is properly installed, it will be "stowned" automatically.
``stowned'' means that this package is available in the master directory,
on which xpbs has symlinked all files from DESTDIR/<pkgname>.
+
To remove a currently installed (and stowned) package, you can use:
-----------------------------------------
$ cd srcpkgs/<pkgname> && xbps-src remove
-----------------------------------------
Please note that when you remove it, the package will also be removed
from XBPS_DESTDIR and previously `unstowned`.
+
To stow an already installed package (from XBPS_DESTDIR/<pkgname>):
---------------------------------------
$ cd srcpkgs/<pkgname> && xbps-src stow
---------------------------------------
To unstow an already installed (stowned) package:
-----------------------------------------
$ cd srcpkgs/<pkgname> && xbps-src unstow
-----------------------------------------
You can also print some stuff about any template build file, e.g:
---------------------------------------
$ cd srcpkgs/<pkgname> && xbps-src info
---------------------------------------
To list installed (stowned) packages, use this:
---------------
$ xbps-src list
---------------
To only extract the distfiles, without configuring/building/installing:
------------------------------------------
$ cd srcpkgs/<pkgname> && xbps-src extract
------------------------------------------
To not remove the build directory after successful installation:
---------------------------------------------
$ cd srcpkgs/<pkgname> && xbps-src -C install
---------------------------------------------
To only fetch the distfile:
----------------------------------------
$ cd srcpkgs/<pkgname> && xbps-src fetch
----------------------------------------
To only install the package, _without_ stowning it into the master directory:
--------------------------------------------------
$ cd srcpkgs/<pkgname> && xbps-src install-destdir
--------------------------------------------------
To list files installed by a package, note that package must be installed
into destination directory first:
------------------------------
$ xbps-src listfiles <pkgname>
------------------------------
That should be enough to get you started. If you have any question or
suggestion about *xbps-src* and the build templates, don't forget that there
is a mailing list to talk about it on:
http://groups.google.com/xbps
or join us at #xbps on irc.freenode.net.