From a95fe88b13be2df71da9471557e1f3df79565b56 Mon Sep 17 00:00:00 2001 From: Juan RP Date: Wed, 20 May 2015 19:04:34 +0200 Subject: [PATCH] cubieboard2-uboot: modernize and support zImage. cubietruck-uboot is now a subpkg. This is based off of ArchlinuxARM changes. --- srcpkgs/cubieboard2-uboot/files/boot.txt | 21 + .../files/cubieboard2.bootcmd | 5 - .../cubieboard2-uboot/files/cubieboard2.fex | 975 ------------ srcpkgs/cubieboard2-uboot/patches/uuid.patch | 10 + srcpkgs/cubieboard2-uboot/template | 67 +- .../cubietruck-uboot/files/cubietruck.bootcmd | 4 - srcpkgs/cubietruck-uboot/files/cubietruck.fex | 1402 ----------------- srcpkgs/cubietruck-uboot/template | 35 - 8 files changed, 75 insertions(+), 2444 deletions(-) create mode 100644 srcpkgs/cubieboard2-uboot/files/boot.txt delete mode 100644 srcpkgs/cubieboard2-uboot/files/cubieboard2.bootcmd delete mode 100644 srcpkgs/cubieboard2-uboot/files/cubieboard2.fex create mode 100644 srcpkgs/cubieboard2-uboot/patches/uuid.patch delete mode 100644 srcpkgs/cubietruck-uboot/files/cubietruck.bootcmd delete mode 100644 srcpkgs/cubietruck-uboot/files/cubietruck.fex delete mode 100644 srcpkgs/cubietruck-uboot/template diff --git a/srcpkgs/cubieboard2-uboot/files/boot.txt b/srcpkgs/cubieboard2-uboot/files/boot.txt new file mode 100644 index 0000000000..824d5fc8c3 --- /dev/null +++ b/srcpkgs/cubieboard2-uboot/files/boot.txt @@ -0,0 +1,21 @@ +part uuid ${devtype} ${devnum}:${bootpart} uuid +setenv bootargs console=${console} root=PARTUUID=${uuid} rw rootwait + +if load ${devtype} ${devnum}:${bootpart} ${kernel_addr_r} /boot/zImage; then + if load ${devtype} ${devnum}:${bootpart} ${fdt_addr_r} +/boot/dtbs/${fdtfile}; then + if load ${devtype} ${devnum}:${bootpart} ${ramdisk_addr_r} +/boot/initramfs-linux.img; then + bootz ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr_r}; + else + bootz ${kernel_addr_r} - ${fdt_addr_r}; + fi; + fi; +fi + +if load ${devtype} ${devnum}:${bootpart} 0x48000000 /boot/uImage; then + if load ${devtype} ${devnum}:${bootpart} 0x43000000 /boot/script.bin; then + setenv bootm_boot_mode sec; + bootm 0x48000000; + fi; +fi diff --git a/srcpkgs/cubieboard2-uboot/files/cubieboard2.bootcmd b/srcpkgs/cubieboard2-uboot/files/cubieboard2.bootcmd deleted file mode 100644 index afa05c60df..0000000000 --- a/srcpkgs/cubieboard2-uboot/files/cubieboard2.bootcmd +++ /dev/null @@ -1,5 +0,0 @@ -setenv machid 0x10bb -setenv bootargs console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rw rootwait loglevel=4 panic=10 ${extra} -fatload mmc 0 0x43000000 script.bin || ext2load mmc 0 0x43000000 boot/script.bin -fatload mmc 0 0x48000000 uImage || ext2load mmc 0 0x48000000 uImage boot/uImage -bootm 0x48000000 diff --git a/srcpkgs/cubieboard2-uboot/files/cubieboard2.fex b/srcpkgs/cubieboard2-uboot/files/cubieboard2.fex deleted file mode 100644 index 8ebaba874a..0000000000 --- a/srcpkgs/cubieboard2-uboot/files/cubieboard2.fex +++ /dev/null @@ -1,975 +0,0 @@ -[product] -version = "100" -machine = "cubieboard2" - -[platform] -eraseflag = 0 - -[target] -boot_clock = 912 -dcdc2_vol = 1400 -dcdc3_vol = 1250 -ldo2_vol = 3000 -ldo3_vol = 2800 -ldo4_vol = 2800 -storage_type = 1 - -[clock] -pll3 = 297 -pll4 = 300 -pll6 = 600 -pll7 = 297 -pll8 = 336 - -[card_boot] -logical_start = 40960 -sprite_gpio0 = - -[card0_boot_para] -card_ctrl = 0 -card_high_speed = 1 -card_line = 4 -sdc_d1 = port:PF00<2><1> -sdc_d0 = port:PF01<2><1> -sdc_clk = port:PF02<2><1> -sdc_cmd = port:PF03<2><1> -sdc_d3 = port:PF04<2><1> -sdc_d2 = port:PF05<2><1> - -[card2_boot_para] -card_ctrl = 2 -card_high_speed = 1 -card_line = 4 -sdc_cmd = port:PC06<3><1> -sdc_clk = port:PC07<3><1> -sdc_d0 = port:PC08<3><1> -sdc_d1 = port:PC09<3><1> -sdc_d2 = port:PC10<3><1> -sdc_d3 = port:PC11<3><1> - -[twi_para] -twi_port = 0 -twi_scl = port:PB00<2> -twi_sda = port:PB01<2> - -[uart_para] -uart_debug_port = 0 -uart_debug_tx = port:PB22<2><1> -uart_debug_rx = port:PB23<2><1> - -[uart_force_debug] -uart_debug_port = 0 -uart_debug_tx = port:PF02<4><1> -uart_debug_rx = port:PF04<4><1> - -[jtag_para] -jtag_enable = 0 -jtag_ms = port:PB14<3> -jtag_ck = port:PB15<3> -jtag_do = port:PB16<3> -jtag_di = port:PB17<3> - -[pm_para] -standby_mode = 0 - -[dram_para] -dram_baseaddr = 0x40000000 -dram_clk = 432 -dram_type = 3 -dram_rank_num = 1 -dram_chip_density = 4096 -dram_io_width = 16 -dram_bus_width = 32 -dram_cas = 9 -dram_zq = 0x7f -dram_odt_en = 0 -dram_size = 1024 -dram_tpr0 = 0x42d899b7 -dram_tpr1 = 0xa090 -dram_tpr2 = 0x22a00 -dram_tpr3 = 0x0 -dram_tpr4 = 0x1 -dram_tpr5 = 0x0 -dram_emr1 = 0x4 -dram_emr2 = 0x10 -dram_emr3 = 0x0 - -[mali_para] -mali_used = 1 -mali_clkdiv = 1 - -[emac_para] -emac_used = 1 -emac_rxd3 = port:PA00<2> -emac_rxd2 = port:PA01<2> -emac_rxd1 = port:PA02<2> -emac_rxd0 = port:PA03<2> -emac_txd3 = port:PA04<2> -emac_txd2 = port:PA05<2> -emac_txd1 = port:PA06<2> -emac_txd0 = port:PA07<2> -emac_rxclk = port:PA08<2> -emac_rxerr = port:PA09<2> -emac_rxdV = port:PA10<2> -emac_mdc = port:PA11<2> -emac_mdio = port:PA12<2> -emac_txen = port:PA13<2> -emac_txclk = port:PA14<2> -emac_crs = port:PA15<2> -emac_col = port:PA16<2> -emac_reset = port:PA17<1> - -[twi0_para] -twi0_used = 1 -twi0_scl = port:PB00<2> -twi0_sda = port:PB01<2> - -[twi1_para] -twi1_used = 0 -twi1_scl = port:PB18<2> -twi1_sda = port:PB19<2> - -[twi2_para] -twi2_used = 0 -twi2_scl = port:PB20<2> -twi2_sda = port:PB21<2> - -[uart_para0] -uart_used = 1 -uart_port = 0 -uart_type = 2 -uart_tx = port:PB22<2><1> -uart_rx = port:PB23<2><1> - -[uart_para1] -uart_used = 0 -uart_port = 1 -uart_type = 8 -uart_tx = port:PA10<4><1> -uart_rx = port:PA11<4><1> -uart_rts = port:PA12<4><1> -uart_cts = port:PA13<4><1> -uart_dtr = port:PA14<4><1> -uart_dsr = port:PA15<4><1> -uart_dcd = port:PA16<4><1> -uart_ring = port:PA17<4><1> - -[uart_para2] -uart_used = 0 -uart_port = 2 -uart_type = 4 -uart_tx = port:PI18<3><1> -uart_rx = port:PI19<3><1> -uart_rts = port:PI16<3><1> -uart_cts = port:PI17<3><1> - -[uart_para3] -uart_used = 0 -uart_port = 3 -uart_type = 4 -uart_tx = port:PH00<4><1> -uart_rx = port:PH01<4><1> -uart_rts = port:PH02<4><1> -uart_cts = port:PH03<4><1> - -[uart_para4] -uart_used = 0 -uart_port = 4 -uart_type = 2 -uart_tx = port:PH04<4><1> -uart_rx = port:PH05<4><1> - -[uart_para5] -uart_used = 0 -uart_port = 5 -uart_type = 2 -uart_tx = port:PH06<4><1> -uart_rx = port:PH07<4><1> - -[uart_para6] -uart_used = 0 -uart_port = 6 -uart_type = 2 -uart_tx = port:PA12<4><1> -uart_rx = port:PA13<4><1> - -[uart_para7] -uart_used = 0 -uart_port = 7 -uart_type = 2 -uart_tx = port:PA14<4><1> -uart_rx = port:PA15<4><1> - -[spi0_para] -spi_used = 0 -spi_cs_bitmap = 1 -spi_cs0 = port:PI10<2> -spi_cs1 = port:PI14<2> -spi_sclk = port:PI11<2> -spi_mosi = port:PI12<2> -spi_miso = port:PI13<2> - -[spi1_para] -spi_used = 0 -spi_cs_bitmap = 1 -spi_cs0 = port:PA00<3> -spi_cs1 = port:PA04<3> -spi_sclk = port:PA01<3> -spi_mosi = port:PA02<3> -spi_miso = port:PA03<3> - -[spi2_para] -spi_used = 0 -spi_cs_bitmap = 1 -spi_cs0 = port:PC19<3> -spi_cs1 = port:PB13<2> -spi_sclk = port:PC20<3> -spi_mosi = port:PC21<3> -spi_miso = port:PC22<3> - -[spi3_para] -spi_used = 0 -spi_cs_bitmap = 1 -spi_cs0 = port:PA05<3> -spi_cs1 = port:PA09<3> -spi_sclk = port:PA06<3> -spi_mosi = port:PA07<3> -spi_miso = port:PA08<3> - -[ctp_para] -ctp_used = 0 -ctp_name = "gt811" -ctp_twi_id = 2 -ctp_twi_addr = 0x40 -ctp_screen_max_x = 1024 -ctp_screen_max_y = 600 -ctp_revert_x_flag = 0 -ctp_revert_y_flag = 0 -ctp_exchange_x_y_flag = 1 -ctp_firm = 1 -ctp_int_port = port:PH21<6> -ctp_wakeup = port:PB13<1><1> - -[ctp_list_para] -ctp_det_used = 0 -ft5x_ts = 0 -gt82x = 0 -gslX680 = 0 -gt9xx_ts = 0 -gt811 = 0 - -[tkey_para] -tkey_used = 0 -tkey_twi_id = 2 -tkey_twi_addr = 0x62 -tkey_int = port:PI13<6> - -[motor_para] -motor_used = 0 -motor_shake = port:PB03<1><1> - -[gpio_para] -gpio_used = 1 -gpio_num = 2 -gpio_pin_1 = port:PH20<1><1> -gpio_pin_2 = port:PH21<1><1> - -[nand_para] -nand_used = 1 -nand_we = port:PC00<2> -nand_ale = port:PC01<2> -nand_cle = port:PC02<2> -nand_ce1 = port:PC03<2> -nand_ce0 = port:PC04<2> -nand_nre = port:PC05<2> -nand_rb0 = port:PC06<2> -nand_rb1 = port:PC07<2> -nand_d0 = port:PC08<2> -nand_d1 = port:PC09<2> -nand_d2 = port:PC10<2> -nand_d3 = port:PC11<2> -nand_d4 = port:PC12<2> -nand_d5 = port:PC13<2> -nand_d6 = port:PC14<2> -nand_d7 = port:PC15<2> -nand_wp = port:PC16<2> -nand_ce2 = port:PC17<2> -nand_ce3 = port:PC18<2> -nand_ce4 = -nand_ce5 = -nand_ce6 = -nand_ce7 = -nand_spi = port:PC23<3> -nand_ndqs = port:PC24<2> -good_block_ratio = 0 - -[disp_init] -disp_init_enable = 1 -disp_mode = 0 -screen0_output_type = 3 -screen0_output_mode = 4 -screen1_output_type = 0 -screen1_output_mode = 4 -fb0_framebuffer_num = 3 -fb0_format = 10 -fb0_pixel_sequence = 0 -fb0_scaler_mode_enable = 0 -fb1_framebuffer_num = 2 -fb1_format = 10 -fb1_pixel_sequence = 0 -fb1_scaler_mode_enable = 0 -lcd0_backlight = 197 -lcd1_backlight = 197 -lcd0_bright = 50 -lcd0_contrast = 50 -lcd0_saturation = 57 -lcd0_hue = 50 -lcd1_bright = 50 -lcd1_contrast = 50 -lcd1_saturation = 57 -lcd1_hue = 50 - -[lcd0_para] -lcd_used = 0 -lcd_x = 1024 -lcd_y = 600 -lcd_dclk_freq = 51 -lcd_pwm_not_used = 0 -lcd_pwm_ch = 0 -lcd_pwm_freq = 10000 -lcd_pwm_pol = 1 -lcd_max_bright = 240 -lcd_min_bright = 64 -lcd_if = 0 -lcd_hbp = 158 -lcd_ht = 1344 -lcd_vbp = 25 -lcd_vt = 1270 -lcd_vspw = 3 -lcd_hspw = 20 -lcd_hv_if = 0 -lcd_hv_smode = 0 -lcd_hv_s888_if = 0 -lcd_hv_syuv_if = 0 -lcd_lvds_ch = 0 -lcd_lvds_mode = 0 -lcd_lvds_bitwidth = 0 -lcd_lvds_io_cross = 0 -lcd_cpu_if = 0 -lcd_frm = 1 -lcd_io_cfg0 = 0 -lcd_gamma_correction_en = 0 -lcd_gamma_tbl_0 = 0x0 -lcd_gamma_tbl_1 = 0x10101 -lcd_gamma_tbl_255 = 0xffffff -lcd_bl_en_used = 0 -lcd_bl_en = port:PH07<1><0><1> -lcd_power_used = 0 -lcd_power = port:PH08<1><0><1> -lcd_pwm_used = 0 -lcd_pwm = port:PB02<2><0> -lcdd0 = port:PD00<2><0> -lcdd1 = port:PD01<2><0> -lcdd2 = port:PD02<2><0> -lcdd3 = port:PD03<2><0> -lcdd4 = port:PD04<2><0> -lcdd5 = port:PD05<2><0> -lcdd6 = port:PD06<2><0> -lcdd7 = port:PD07<2><0> -lcdd8 = port:PD08<2><0> -lcdd9 = port:PD09<2><0> -lcdd10 = port:PD10<2><0> -lcdd11 = port:PD11<2><0> -lcdd12 = port:PD12<2><0> -lcdd13 = port:PD13<2><0> -lcdd14 = port:PD14<2><0> -lcdd15 = port:PD15<2><0> -lcdd16 = port:PD16<2><0> -lcdd17 = port:PD17<2><0> -lcdd18 = port:PD18<2><0> -lcdd19 = port:PD19<2><0> -lcdd20 = port:PD20<2><0> -lcdd21 = port:PD21<2><0> -lcdd22 = port:PD22<2><0> -lcdd23 = port:PD23<2><0> -lcdclk = port:PD24<2><0> -lcdde = port:PD25<2><0> -lcdhsync = port:PD26<2><0> -lcdvsync = port:PD27<2><0> - -[lcd1_para] -lcd_used = 0 -lcd_x = 0 -lcd_y = 0 -lcd_dclk_freq = 0 -lcd_pwm_not_used = 0 -lcd_pwm_ch = 1 -lcd_pwm_freq = 0 -lcd_pwm_pol = 0 -lcd_max_bright = 240 -lcd_min_bright = 64 -lcd_if = 0 -lcd_hbp = 0 -lcd_ht = 0 -lcd_vbp = 0 -lcd_vt = 0 -lcd_vspw = 0 -lcd_hspw = 0 -lcd_hv_if = 0 -lcd_hv_smode = 0 -lcd_hv_s888_if = 0 -lcd_hv_syuv_if = 0 -lcd_lvds_ch = 0 -lcd_lvds_mode = 0 -lcd_lvds_bitwidth = 0 -lcd_lvds_io_cross = 0 -lcd_cpu_if = 0 -lcd_frm = 0 -lcd_io_cfg0 = 0 -lcd_gamma_correction_en = 0 -lcd_gamma_tbl_0 = 0x0 -lcd_gamma_tbl_1 = 0x10101 -lcd_gamma_tbl_255 = 0xffffff -lcd_bl_en_used = 0 -lcd_bl_en = -lcd_power_used = 0 -lcd_power = -lcd_pwm_used = 0 -lcd_pwm = port:PI03<2><0> -lcd_gpio_0 = -lcd_gpio_1 = -lcd_gpio_2 = -lcd_gpio_3 = -lcdd0 = port:PH00<2><0> -lcdd1 = port:PH01<2><0> -lcdd2 = port:PH02<2><0> -lcdd3 = port:PH03<2><0> -lcdd4 = port:PH04<2><0> -lcdd5 = port:PH05<2><0> -lcdd6 = port:PH06<2><0> -lcdd7 = port:PH07<2><0> -lcdd8 = port:PH08<2><0> -lcdd9 = port:PH09<2><0> -lcdd10 = port:PH10<2><0> -lcdd11 = port:PH11<2><0> -lcdd12 = port:PH12<2><0> -lcdd13 = port:PH13<2><0> -lcdd14 = port:PH14<2><0> -lcdd15 = port:PH15<2><0> -lcdd16 = port:PH16<2><0> -lcdd17 = port:PH17<2><0> -lcdd18 = port:PH18<2><0> -lcdd19 = port:PH19<2><0> -lcdd20 = port:PH20<2><0> -lcdd21 = port:PH21<2><0> -lcdd22 = port:PH22<2><0> -lcdd23 = port:PH23<2><0> -lcdclk = port:PH24<2><0> -lcdde = port:PH25<2><0> -lcdhsync = port:PH26<2><0> -lcdvsync = port:PH27<2><0> - -[tv_out_dac_para] -dac_used = 0 -dac0_src = 4 -dac1_src = 5 -dac2_src = 6 -dac3_src = 0 - -[hdmi_para] -hdmi_used = 1 - -[camera_list_para] -camera_list_para_used = 0 -ov7670 = 0 -gc0308 = 1 -gt2005 = 1 -hi704 = 0 -sp0838 = 0 -mt9m112 = 0 -mt9m113 = 0 -ov2655 = 0 -hi253 = 0 -gc0307 = 0 -mt9d112 = 0 -ov5640 = 0 -gc2015 = 0 -ov2643 = 0 -gc0329 = 0 -gc0309 = 0 -tvp5150 = 0 -s5k4ec = 0 -ov5650_mv9335 = 0 -siv121d = 0 -gc2035 = 0 - -[csi0_para] -csi_used = 0 -csi_dev_qty = 2 -csi_stby_mode = 0 -csi_mname = "gc0308" -csi_twi_id = 1 -csi_twi_addr = 0x42 -csi_if = 0 -csi_vflip = 0 -csi_hflip = 0 -csi_iovdd = "axp20_pll" -csi_avdd = "" -csi_dvdd = "" -csi_vol_iovdd = 2800 -csi_vol_dvdd = -csi_vol_avdd = -csi_flash_pol = 0 -csi_mname_b = "gt2005" -csi_twi_id_b = 1 -csi_twi_addr_b = 0x78 -csi_if_b = 0 -csi_vflip_b = 0 -csi_hflip_b = 0 -csi_iovdd_b = "axp20_pll" -csi_avdd_b = "" -csi_dvdd_b = "" -csi_vol_iovdd_b = 2800 -csi_vol_avdd_b = -csi_vol_dvdd_b = -csi_flash_pol_b = 0 -csi_pck = port:PE00<3> -csi_ck = port:PE01<3> -csi_hsync = port:PE02<3> -csi_vsync = port:PE03<3> -csi_d0 = port:PE04<3> -csi_d1 = port:PE05<3> -csi_d2 = port:PE06<3> -csi_d3 = port:PE07<3> -csi_d4 = port:PE08<3> -csi_d5 = port:PE09<3> -csi_d6 = port:PE10<3> -csi_d7 = port:PE11<3> -csi_reset = port:PH14<1><0> -csi_power_en = port:PH17<1><0> -csi_stby = port:PH19<1><0> -csi_flash = -csi_af_en = -csi_reset_b = port:PH14<1><0> -csi_power_en_b = port:PH17<1><0> -csi_stby_b = port:PH18<1><0> -csi_flash_b = -csi_af_en_b = - -[csi1_para] -csi_used = 0 -csi_dev_qty = 1 -csi_stby_mode = 0 -csi_mname = "gc0308" -csi_if = 0 -csi_iovdd = "axp20_pll" -csi_avdd = "" -csi_dvdd = "" -csi_vol_iovdd = 2800 -csi_vol_dvdd = -csi_vol_avdd = -csi_vflip = 0 -csi_hflip = 0 -csi_flash_pol = 0 -csi_facing = 1 -csi_twi_id = 1 -csi_twi_addr = 0x42 -csi_pck = port:PG00<3> -csi_ck = port:PG01<3> -csi_hsync = port:PG02<3> -csi_vsync = port:PG03<3> -csi_d0 = port:PG04<3> -csi_d1 = port:PG05<3> -csi_d2 = port:PG06<3> -csi_d3 = port:PG07<3> -csi_d4 = port:PG08<3> -csi_d5 = port:PG09<3> -csi_d6 = port:PG10<3> -csi_d7 = port:PG11<3> -csi_reset = port:PH13<1><0> -csi_power_en = port:PH16<1><0> -csi_stby = port:PH19<1><0> - -[tvout_para] -tvout_used = 0 -tvout_channel_num = 1 - -[tvin_para] -tvin_used = 0 -tvin_channel_num = 4 - -[sata_para] -sata_used = 1 -sata_power_en = port:PB08<1><0> - -[mmc0_para] -sdc_used = 1 -sdc_detmode = 1 -sdc_buswidth = 4 -sdc_clk = port:PF02<2><1><2> -sdc_cmd = port:PF03<2><1><2> -sdc_d0 = port:PF01<2><1><2> -sdc_d1 = port:PF00<2><1><2> -sdc_d2 = port:PF05<2><1><2> -sdc_d3 = port:PF04<2><1><2> -sdc_det = port:PH01<0><1> -sdc_use_wp = 0 -sdc_wp = -sdc_isio = 0 -sdc_regulator = "none" - -[mmc1_para] -sdc_used = 0 -sdc_detmode = 4 -sdc_buswidth = 4 -sdc_clk = port:PG00<2><1><2> -sdc_cmd = port:PG01<2><1><2> -sdc_d0 = port:PG02<2><1><2> -sdc_d1 = port:PG03<2><1><2> -sdc_d2 = port:PG04<2><1><2> -sdc_d3 = port:PG05<2><1><2> -sdc_det = -sdc_use_wp = 0 -sdc_wp = -sdc_isio = 0 -sdc_regulator = "none" - -[mmc2_para] -sdc_used = 0 -sdc_detmode = 3 -sdc_buswidth = 4 -sdc_cmd = port:PC06<3><1><2> -sdc_clk = port:PC07<3><1><2> -sdc_d0 = port:PC08<3><1><2> -sdc_d1 = port:PC09<3><1><2> -sdc_d2 = port:PC10<3><1><2> -sdc_d3 = port:PC11<3><1><2> -sdc_det = -sdc_use_wp = 0 -sdc_wp = -sdc_isio = 0 -sdc_regulator = "none" - -[mmc3_para] -sdc_used = 0 -sdc_detmode = 4 -sdc_buswidth = 4 -sdc_cmd = port:PI04<2><1><2> -sdc_clk = port:PI05<2><1><2> -sdc_d0 = port:PI06<2><1><2> -sdc_d1 = port:PI07<2><1><2> -sdc_d2 = port:PI08<2><1><2> -sdc_d3 = port:PI09<2><1><2> -sdc_det = -sdc_use_wp = 0 -sdc_wp = -sdc_isio = 1 -sdc_regulator = "none" - -[ms_para] -ms_used = 0 -ms_bs = port:PH06<5> -ms_clk = port:PH07<5> -ms_d0 = port:PH08<5> -ms_d1 = port:PH09<5> -ms_d2 = port:PH10<5> -ms_d3 = port:PH11<5> -ms_det = - -[smc_para] -smc_used = 0 -smc_rst = port:PH13<5> -smc_vppen = port:PH14<5> -smc_vppp = port:PH15<5> -smc_det = port:PH16<5> -smc_vccen = port:PH17<5> -smc_sck = port:PH18<5> -smc_sda = port:PH19<5> - -[ps2_0_para] -ps2_used = 0 -ps2_scl = port:PI20<2><1> -ps2_sda = port:PI21<2><1> - -[ps2_1_para] -ps2_used = 0 -ps2_scl = port:PI14<3><1> -ps2_sda = port:PI15<3><1> - -[can_para] -can_used = 0 -can_tx = port:PA16<3> -can_rx = port:PA17<3> - -[keypad_para] -kp_used = 0 -kp_in_size = 8 -kp_out_size = 8 -kp_in0 = port:PH08<4><1> -kp_in1 = port:PH09<4><1> -kp_in2 = port:PH10<4><1> -kp_in3 = port:PH11<4><1> -kp_in4 = port:PH14<4><1> -kp_in5 = port:PH15<4><1> -kp_in6 = port:PH16<4><1> -kp_in7 = port:PH17<4><1> -kp_out0 = port:PH18<4><1> -kp_out1 = port:PH19<4><1> -kp_out2 = port:PH22<4><1> -kp_out3 = port:PH23<4><1> -kp_out4 = port:PH24<4><1> -kp_out5 = port:PH25<4><1> -kp_out6 = port:PH26<4><1> -kp_out7 = port:PH27<4><1> - -[usbc0] -usb_used = 1 -usb_port_type = 2 -usb_detect_type = 1 -usb_id_gpio = port:PH04<0><1> -usb_det_vbus_gpio = port:PH05<0><0> -usb_drv_vbus_gpio = port:PB09<1><0><0> -usb_host_init_state = 0 - -[usbc1] -usb_used = 1 -usb_port_type = 1 -usb_detect_type = 0 -usb_id_gpio = -usb_det_vbus_gpio = -usb_drv_vbus_gpio = port:PH06<1><0><0> -usb_host_init_state = 1 - -[usbc2] -usb_used = 1 -usb_port_type = 1 -usb_detect_type = 0 -usb_id_gpio = -usb_det_vbus_gpio = -usb_drv_vbus_gpio = port:PH03<1><0><0> -usb_host_init_state = 1 - -[usb_feature] -vendor_id = 6353 -mass_storage_id = 1 -adb_id = 2 -manufacturer_name = "USB Developer" -product_name = "Android" -serial_number = "20080411" - -[msc_feature] -vendor_name = "USB 2.0" -product_name = "USB Flash Driver" -release = 100 -luns = 3 - -[gsensor_para] -gsensor_used = 0 -gsensor_twi_id = 1 -gsensor_int1 = -gsensor_int2 = - -[gsensor_list_para] -gsensor_det_used = 0 -bma250 = 1 -mma8452 = 1 -mma7660 = 1 -mma865x = 1 -afa750 = 1 -lis3de_acc = 1 -lis3dh_acc = 1 -kxtik = 1 -dmard10 = 0 -dmard06 = 1 -mxc622x = 1 -fxos8700 = 1 -lsm303d = 1 - -[gps_para] -gps_used = 0 -gps_spi_id = 2 -gps_spi_cs_num = 0 -gps_lradc = 1 -gps_clk = port:PI00<2> -gps_sign = port:PI01<2> -gps_mag = port:PI02<2> -gps_vcc_en = port:PC22<1><0> -gps_osc_en = port:PI14<1><0> -gps_rx_en = port:PI15<1><0> - -[wifi_para] -wifi_used = 0 -wifi_sdc_id = 3 -wifi_usbc_id = 2 -wifi_usbc_type = 1 -wifi_mod_sel = 6 -wifi_power = "" -rtk_rtl8723as_wl_dis = port:PH09<1><0> -rtk_rtl8723as_bt_dis = port:PB05<1><0> -rtk_rtl8723as_wl_host_wake = port:PH10<0><0> -rtk_rtl8723as_bt_host_wake = port:PI21<0><0> -ap6xxx_wl_regon = port:PH09<1><0> -ap6xxx_wl_host_wake = port:PH10<0><0> -ap6xxx_bt_regon = port:PB05<1><0> -ap6xxx_bt_wake = port:PI20<1><0> -ap6xxx_bt_host_wake = port:PI21<0><0> - -[3g_para] -3g_used = 0 -3g_usbc_num = 2 -3g_uart_num = 0 -3g_pwr = -3g_wakeup = -3g_int = - -[gy_para] -gy_used = 0 -gy_twi_id = 1 -gy_twi_addr = 0 -gy_int1 = port:PH18<6><1> -gy_int2 = port:PH19<6><1> - -[ls_para] -ls_used = 0 -ls_twi_id = 1 -ls_twi_addr = 0 -ls_int = port:PH20<6><1> - -[compass_para] -compass_used = 0 -compass_twi_id = 1 -compass_twi_addr = 0 -compass_int = port:PI13<6><1> - -[bt_para] -bt_used = 0 -bt_uart_id = 2 -bt_wakeup = port:PI20<1> -bt_gpio = port:PI21<1> -bt_rst = port:PB05<1> - -[i2s_para] -i2s_used = 0 -i2s_channel = 2 -i2s_mclk = port:PB05<2><1> -i2s_bclk = port:PB06<2><1> -i2s_lrclk = port:PB07<2><1> -i2s_dout0 = port:PB08<2><1> -i2s_dout1 = -i2s_dout2 = -i2s_dout3 = -i2s_din = port:PB12<2><1> - -[spdif_para] -spdif_used = 0 -spdif_mclk = -spdif_dout = port:PB13<4><1> -spdif_din = - -[audio_para] -audio_used = 1 -capture_used = 1 -audio_pa_ctrl = port:PH15<1><1> - -[switch_para] -switch_used = 0 - -[leds_para] -leds_used = 1 -leds_num = 2 -leds_pin_1 = port:PH20<1><0> -leds_name_1 = "green:ph20:led1" -leds_default_1 = 1 -leds_trigger_1 = "mmc0" -leds_pin_2 = port:PH21<1><0> -leds_name_2 = "blue:ph21:led2" -leds_default_2 = 0 -leds_trigger_2 = "heartbeat" - -[ir_para] -ir_used = 1 -ir_rx = port:PB04<2> - -[pmu_para] -pmu_used = 1 -pmu_twi_addr = 52 -pmu_twi_id = 0 -pmu_irq_id = 32 -pmu_battery_rdc = 120 -pmu_battery_cap = 2100 -pmu_init_chgcur = 300 -pmu_earlysuspend_chgcur = 600 -pmu_suspend_chgcur = 1000 -pmu_resume_chgcur = 300 -pmu_shutdown_chgcur = 1000 -pmu_init_chgvol = 4200 -pmu_init_chgend_rate = 15 -pmu_init_chg_enabled = 1 -pmu_init_adc_freq = 100 -pmu_init_adc_freqc = 100 -pmu_init_chg_pretime = 50 -pmu_init_chg_csttime = 720 -pmu_bat_para1 = 0 -pmu_bat_para2 = 0 -pmu_bat_para3 = 0 -pmu_bat_para4 = 0 -pmu_bat_para5 = 5 -pmu_bat_para6 = 11 -pmu_bat_para7 = 13 -pmu_bat_para8 = 15 -pmu_bat_para9 = 19 -pmu_bat_para10 = 32 -pmu_bat_para11 = 50 -pmu_bat_para12 = 58 -pmu_bat_para13 = 71 -pmu_bat_para14 = 81 -pmu_bat_para15 = 89 -pmu_bat_para16 = 100 -pmu_usbvol_limit = 1 -pmu_usbcur_limit = 0 -pmu_usbvol = 4000 -pmu_usbcur = 0 -pmu_usbvol_pc = 4200 -pmu_usbcur_pc = 0 -pmu_pwroff_vol = 3300 -pmu_pwron_vol = 2900 -pmu_pekoff_time = 6000 -pmu_pekoff_en = 1 -pmu_peklong_time = 1500 -pmu_pekon_time = 1000 -pmu_pwrok_time = 64 -pmu_pwrnoe_time = 2000 -pmu_intotp_en = 1 -pmu_used2 = 0 -pmu_adpdet = port:PH02<0> -pmu_init_chgcur2 = 400 -pmu_earlysuspend_chgcur2 = 600 -pmu_suspend_chgcur2 = 1200 -pmu_resume_chgcur2 = 400 -pmu_shutdown_chgcur2 = 1200 -pmu_suspendpwroff_vol = 3500 -pmu_batdeten = 1 - -[recovery_key] -key_min = 4 -key_max = 40 - -[dvfs_table] -max_freq = 912000000 -min_freq = 400000000 -LV_count = 7 -LV1_freq = 1008000000 -LV1_volt = 1450 -LV2_freq = 912000000 -LV2_volt = 1400 -LV3_freq = 864000000 -LV3_volt = 1300 -LV4_freq = 720000000 -LV4_volt = 1200 -LV5_freq = 528000000 -LV5_volt = 1100 -LV6_freq = 312000000 -LV6_volt = 1050 -LV7_freq = 144000000 -LV7_volt = 1050 - diff --git a/srcpkgs/cubieboard2-uboot/patches/uuid.patch b/srcpkgs/cubieboard2-uboot/patches/uuid.patch new file mode 100644 index 0000000000..5a1cf45624 --- /dev/null +++ b/srcpkgs/cubieboard2-uboot/patches/uuid.patch @@ -0,0 +1,10 @@ +--- include/config_distro_defaults.h ++++ include/config_distro_defaults.h +@@ -53,4 +53,7 @@ + #define CONFIG_SUPPORT_RAW_INITRD + #define CONFIG_SYS_HUSH_PARSER + ++#define CONFIG_CMD_PART ++#define CONFIG_PARTITION_UUIDS ++ + #endif /* _CONFIG_CMD_DISTRO_DEFAULTS_H */ diff --git a/srcpkgs/cubieboard2-uboot/template b/srcpkgs/cubieboard2-uboot/template index 65ff05d040..ef2e2c1c10 100644 --- a/srcpkgs/cubieboard2-uboot/template +++ b/srcpkgs/cubieboard2-uboot/template @@ -1,33 +1,54 @@ # Template file for 'cubieboard2-uboot' pkgname=cubieboard2-uboot -version=v2013.10 -revision=9 -wrksrc="u-boot-sunxi-${version/v/}-sunxi" -hostmakedepends="sunxi-tools uboot-mkimage" -short_desc="Cubieboard2 U-Boot files for SD booting" +version=2015.01 +revision=1 +wrksrc="u-boot-${version}" +hostmakedepends="bc git sunxi-tools uboot-mkimage" +short_desc="U-Boot for cubieboard2" maintainer="Juan RP " license="GPL-2" -homepage="https://github.com/linux-sunxi/u-boot-sunxi" -distfiles="https://github.com/linux-sunxi/u-boot-sunxi/archive/${version}-sunxi.tar.gz" -checksum=a2a606939574795598d29f04852b1a40ddfcced96e9535d1d31fad30c68e0326 - -only_for_archs="armv7l" +homepage="http://www.denx.de/wiki/U-Boot/WebHome" +distfiles="ftp://ftp.denx.de/pub/u-boot/u-boot-${version}.tar.bz2" +checksum=383051a656ebe11757b17d38a3326387e4a1b0949ca8a9e8ee506bf71dac9fde +do_configure() { + git clone https://github.com/linux-sunxi/sunxi-boards +} do_build() { + local _boards="Cubieboard2 Cubietruck" + unset CFLAGS CXXFLAGS LDFLAGS - - if [ "$CROSS_BUILD" ]; then - make CROSS_COMPILE=${XBPS_CROSS_TRIPLET}- Cubieboard2 - else - make Cubieboard2 - fi - mkimage -C none -A arm -T script -d ${FILESDIR}/cubieboard2.bootcmd boot.scr - fex2bin ${FILESDIR}/cubieboard2.fex script.bin + + for f in ${_boards}; do + mkdir bin_${f} + make distclean + if [ -n "$CROSS_BUILD" ]; then + make CROSS_COMPILE=${XBPS_CROSS_TRIPLET}- ${f}_config + make CROSS_COMPILE=${XBPS_CROSS_TRIPLET}- ${makejobs} + else + make ${f}_config + make ${makejobs} + fi + mv u-boot-sunxi-with-spl.bin bin_${f} + done + + mkimage -A arm -O linux -T script -C none -n "U-Boot boot script" -d ${FILESDIR}/boot.txt boot.scr +} +do_install() { + vmkdir boot + vinstall bin_Cubieboard2/u-boot-sunxi-with-spl.bin 644 boot + fex2bin sunxi-boards/sys_config/a20/cubieboard2.fex ${DESTDIR}/boot/script.bin + vinstall ${FILESDIR}/boot.txt 644 boot + vinstall boot.scr 644 boot } -do_install() { - vinstall u-boot-sunxi-with-spl.bin 644 boot - vinstall script.bin 644 boot - vinstall boot.scr 644 boot - vinstall ${FILESDIR}/cubieboard2.bootcmd 644 boot boot.cmd +cubietruck-uboot_package() { + short_desc="${short_desc/cubieboard2/cubietruck}" + pkg_install () { + vmkdir boot + vinstall bin_Cubietruck/u-boot-sunxi-with-spl.bin 644 boot + fex2bin sunxi-boards/sys_config/a20/cubietruck.fex ${DESTDIR}/boot/script.bin + vinstall ${FILESDIR}/boot.txt 644 boot + vinstall boot.scr 644 boot + } } diff --git a/srcpkgs/cubietruck-uboot/files/cubietruck.bootcmd b/srcpkgs/cubietruck-uboot/files/cubietruck.bootcmd deleted file mode 100644 index 615989b395..0000000000 --- a/srcpkgs/cubietruck-uboot/files/cubietruck.bootcmd +++ /dev/null @@ -1,4 +0,0 @@ -setenv bootargs console=tty1 root=/dev/mmcblk0p2 rootwait fb0_framebuffer_num=4 sunxi_fb_mem_reserve=64 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1280x720p60 panic=10 consoleblank=0 -fatload mmc 0 0x43000000 script.bin || ext2load mmc 0 0x43000000 boot/script.bin -fatload mmc 0 0x48000000 zImage || ext2load mmc 0 0x48000000 boot/zImage -bootz 0x48000000 diff --git a/srcpkgs/cubietruck-uboot/files/cubietruck.fex b/srcpkgs/cubietruck-uboot/files/cubietruck.fex deleted file mode 100644 index 18ff3fd2db..0000000000 --- a/srcpkgs/cubietruck-uboot/files/cubietruck.fex +++ /dev/null @@ -1,1402 +0,0 @@ -;A20 PAD application -;------------------------------------------------------------------------------- -; 说明： -; 1. 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串 -; 2. 新增主键和子键的名称必须控制在32个字符以内，不包括32个 -; 3. 所以的注释以“;”开始，单独占据一行 -; 4. 注释不可和配置项同行，例如：主键和子健后面不能添加任何形式的注释 -; -; gpio的描述形式：Port:端口+组内序号<功能分配><内部电阻状态><驱动能力><输出电平状态> -; 例如：port:PA0<0> -;------------------------------------------------------------------------------- - -[product] -version = "100" -machine = "cubietruck" - -[platform] -eraseflag = 0 - -[target] -boot_clock = 912 -dcdc2_vol = 1450 -dcdc3_vol = 1300 -ldo2_vol = 3000 -ldo3_vol = 2800 -ldo4_vol = 2800 -storage_type = 0 - -[clock] -pll3 = 297 -pll4 = 300 -pll6 = 600 -pll7 = 297 -pll8 = 336 - -[card_boot] -logical_start = 40960 -sprite_gpio0 = - -[card0_boot_para] -card_ctrl = 0 -card_high_speed = 1 -card_line = 4 -sdc_d1 = port:PF0<2><1> -sdc_d0 = port:PF1<2><1> -sdc_clk = port:PF2<2><1> -sdc_cmd = port:PF3<2><1> -sdc_d3 = port:PF4<2><1> -sdc_d2 = port:PF5<2><1> - -[card2_boot_para] -card_ctrl = 2 -card_high_speed = 1 -card_line = 4 -sdc_cmd = port:PC6<3><1> -sdc_clk = port:PC7<3><1> -sdc_d0 = port:PC8<3><1> -sdc_d1 = port:PC9<3><1> -sdc_d2 = port:PC10<3><1> -sdc_d3 = port:PC11<3><1> - -[twi_para] -twi_port = 0 -twi_scl = port:PB0<2> -twi_sda = port:PB1<2> - -[uart_para] -uart_debug_port = 0 -uart_debug_tx = port:PB22<2><1> -uart_debug_rx = port:PB23<2><1> - -[uart_force_debug] -uart_debug_port = 0 -uart_debug_tx =port:PF2<4><1> -uart_debug_rx =port:PF4<4><1> - -[jtag_para] -jtag_enable = 0 -jtag_ms = port:PB14<3> -jtag_ck = port:PB15<3> -jtag_do = port:PB16<3> -jtag_di = port:PB17<3> - -;--------------------------------------------------------------------------------------------------------- -; if 1 == standby_mode, then support super standby; -; else, support normal standby. -;--------------------------------------------------------------------------------------------------------- -[pm_para] -standby_mode = 0 - -;------------------------------------------------------------------------------- -;sdram configuration -;------------------------------------------------------------------------------- -[dram_para] -dram_baseaddr = 0x40000000 -dram_clk = 432 -dram_type = 3 -dram_rank_num = 0xffffffff -dram_chip_density = 0xffffffff -dram_io_width = 0xffffffff -dram_bus_width = 0xffffffff -dram_cas = 9 -dram_zq = 0x7f -dram_odt_en = 0 -dram_size = 0xffffffff -dram_tpr0 = 0x42d899b7 -dram_tpr1 = 0xa090 -dram_tpr2 = 0x22a00 -dram_tpr3 = 0x0 -dram_tpr4 = 0x1 -dram_tpr5 = 0x0 -dram_emr1 = 0x4 -dram_emr2 = 0x10 -dram_emr3 = 0x0 - -;------------------------------------------------------------------------------- -;Mali configuration -;------------------------------------------------------------------------------- -[mali_para] -mali_used = 1 -mali_clkdiv = 1 - -;------------------------------------------------------------------------------- -;Ethernet MAC configuration -;------------------------------------------------------------------------------- -[gmac_para] -gmac_used = 1 -gmac_rxd3 = port:PA00<5><3> -gmac_rxd2 = port:PA01<5><3> -gmac_rxd1 = port:PA02<5><3> -gmac_rxd0 = port:PA03<5><3> -gmac_txd3 = port:PA04<5><3> -gmac_txd2 = port:PA05<5><3> -gmac_txd1 = port:PA06<5><3> -gmac_txd0 = port:PA07<5><3> -gmac_rxclk = port:PA08<5><3> -gmac_rxerr = port:PA09<0><3> -gmac_rxctl = port:PA10<5><3> -gmac_mdc = port:PA11<5><3> -gmac_mdio = port:PA12<5><3> -gmac_txctl = port:PA13<5><3> -gmac_txclk = port:PA14<0><3> -gmac_txck = port:PA15<5><3> -gmac_clkin = port:PA16<5><3> -gmac_txerr = port:PA17<0><3> - -;------------------------------------------------------------------------------- -;i2c configuration -;------------------------------------------------------------------------------- -[twi0_para] -twi0_used = 1 -twi0_scl = port:PB0<2> -twi0_sda = port:PB1<2> - -[twi1_para] -twi1_used = 0 -twi1_scl = port:PB18<2> -twi1_sda = port:PB19<2> - -[twi2_para] -twi2_used = 0 -twi2_scl = port:PB20<2> -twi2_sda = port:PB21<2> - -;------------------------------------------------------------------------------- -;uart configuration -;uart_type --- 2 (2 wire), 4 (4 wire), 8 (8 wire, full function) -;------------------------------------------------------------------------------- -[uart_para0] -uart_used = 1 -uart_port = 0 -uart_type = 2 -uart_tx = port:PB22<2><1> -uart_rx = port:PB23<2><1> - -[uart_para1] -uart_used = 0 -uart_port = 1 -uart_type = 8 -uart_tx = port:PA10<4><1> -uart_rx = port:PA11<4><1> -uart_rts = port:PA12<4><1> -uart_cts = port:PA13<4><1> -uart_dtr = port:PA14<4><1> -uart_dsr = port:PA15<4><1> -uart_dcd = port:PA16<4><1> -uart_ring = port:PA17<4><1> - -[uart_para2] -uart_used = 1 -uart_port = 2 -uart_type = 4 -uart_tx = port:PI18<3><1> -uart_rx = port:PI19<3><1> -uart_rts = port:PI16<3><1> -uart_cts = port:PI17<3><1> - -[uart_para3] -uart_used = 0 -uart_port = 3 -uart_type = 4 -uart_tx = port:PH00<4><1> -uart_rx = port:PH01<4><1> -uart_rts = port:PH02<4><1> -uart_cts = port:PH03<4><1> - -[uart_para4] -uart_used = 0 -uart_port = 4 -uart_type = 2 -uart_tx = port:PH04<4><1> -uart_rx = port:PH05<4><1> - -[uart_para5] -uart_used = 0 -uart_port = 5 -uart_type = 2 -uart_tx = port:PH06<4><1> -uart_rx = port:PH07<4><1> - -[uart_para6] -uart_used = 0 -uart_port = 6 -uart_type = 2 -uart_tx = port:PA12<4><1> -uart_rx = port:PA13<4><1> - -[uart_para7] -uart_used = 0 -uart_port = 7 -uart_type = 2 -uart_tx = port:PA14<4><1> -uart_rx = port:PA15<4><1> - -;------------------------------------------------------------------------------- -;spi configuration -;------------------------------------------------------------------------------- -[spi0_para] -spi_used = 0 -spi_cs_bitmap = 1 -spi_cs0 = port:PI10<2> -spi_cs1 = port:PI14<2> -spi_sclk = port:PI11<2> -spi_mosi = port:PI12<2> -spi_miso = port:PI13<2> - -[spi1_para] -spi_used = 0 -spi_cs_bitmap = 1 -spi_cs0 = port:PA00<3> -spi_cs1 = port:PA04<3> -spi_sclk = port:PA01<3> -spi_mosi = port:PA02<3> -spi_miso = port:PA03<3> - -[spi2_para] -spi_used = 0 -spi_cs_bitmap = 1 -spi_cs0 = port:PC19<3> -spi_cs1 = port:PB13<2> -spi_sclk = port:PC20<3> -spi_mosi = port:PC21<3> -spi_miso = port:PC22<3> - -[spi3_para] -spi_used = 0 -spi_cs_bitmap = 1 -spi_cs0 = port:PA05<3> -spi_cs1 = port:PA09<3> -spi_sclk = port:PA06<3> -spi_mosi = port:PA07<3> -spi_miso = port:PA08<3> - -;------------------------------------------------------------------------------- -;capacitor tp configuration -;external int function -;wakeup output function -;notice: -; tp_int_port & tp_io_port use the same port -;------------------------------------------------------------------------------- -[ctp_para] -ctp_used = 0 -ctp_name = "gt811" -ctp_twi_id = 2 -ctp_twi_addr = 0x40 -ctp_screen_max_x = 1024 -ctp_screen_max_y = 600 -ctp_revert_x_flag = 0 -ctp_revert_y_flag = 0 -ctp_exchange_x_y_flag = 1 -ctp_firm = 1 - -ctp_int_port = port:PH21<6> -ctp_wakeup = port:PB13<1><1> -;-------------------------------------------------------------------------------- -; CTP automatic detection configuration -;ctp_detect_used --- Whether startup automatic inspection function. 1:used,0:unused -;Module name postposition 1 said detection, 0 means no detection. -;-------------------------------------------------------------------------------- -[ctp_list_para] -ctp_det_used = 0 -ft5x_ts = 0 -gt82x = 0 -gslX680 = 0 -gt9xx_ts = 0 -gt811 = 0 -;------------------------------------------------------------------------------- -;touch key configuration -;------------------------------------------------------------------------------- -[tkey_para] -tkey_used = 0 -tkey_twi_id = 2 -tkey_twi_addr = 0x62 -tkey_int = port:PI13<6> - -;------------------------------------------------------------------------------- -;motor configuration -;------------------------------------------------------------------------------- -[motor_para] -motor_used = 0 -motor_shake = port:PB03<1><1> - -[gpio_para] -gpio_used = 1 -gpio_num = 2 -gpio_pin_1 = port:PH20<1><1> -gpio_pin_2 = port:PH10<0><0> - - -[leds_para] -leds_used = 1 -leds_num = 4 -leds_pin_1 = port:PH21<1><0> -leds_name_1 = "blue:ph21:led1" -leds_default_1 = 0 -leds_trigger_1 = "heartbeat" -leds_pin_2 = port:PH20<1><0> -leds_name_2 = "orange:ph20:led2" -leds_default_2 = 0 -leds_trigger_2 = "cpu0" -leds_pin_3 = port:PH11<1><0> -leds_name_3 = "white:ph11:led3" -leds_default_3 = 0 -leds_trigger_3 = "cpu1" -leds_pin_4 = port:PH07<1><0> -leds_name_4 = "green:ph07:led4" -leds_default_4 = 1 -leds_trigger_4 = "mmc0" - - -;------------------------------------------------------------------------------- -;nand flash configuration -;------------------------------------------------------------------------------- -[nand_para] -nand_used = 1 -nand_we = port:PC00<2> -nand_ale = port:PC01<2> -nand_cle = port:PC02<2> -nand_ce1 = port:PC03<2> -nand_ce0 = port:PC04<2> -nand_nre = port:PC05<2> -nand_rb0 = port:PC06<2> -nand_rb1 = port:PC07<2> -nand_d0 = port:PC08<2> -nand_d1 = port:PC09<2> -nand_d2 = port:PC10<2> -nand_d3 = port:PC11<2> -nand_d4 = port:PC12<2> -nand_d5 = port:PC13<2> -nand_d6 = port:PC14<2> -nand_d7 = port:PC15<2> -nand_wp = port:PC16<2> -nand_ce2 = port:PC17<2> -nand_ce3 = port:PC18<2> -nand_ce4 = -nand_ce5 = -nand_ce6 = -nand_ce7 = -nand_spi = port:PC23<3> -nand_ndqs = port:PC24<2> -good_block_ratio = 0 - -;------------------------------------------------------------------------------- -;disp init configuration -; -;disp_mode (0:screen0 1:screen1 2:two_diff_screen_diff_contents -; 3:two_same_screen_diff_contets 4:two_diff_screen_same_contents) -;screenx_output_type (0:none; 1:lcd; 2:tv; 3:hdmi; 4:vga) -;screenx_output_mode (used for tv/hdmi output, 0:480i 1:576i 2:480p 3:576p 4:720p50 5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60 11:pal 14:ntsc) -;screenx_output_mode (used for vga output, 0:1680*1050 1:1440*900 2:1360*768 3:1280*1024 4:1024*768 5:800*600 6:640*480 10:1920*1080 11:1280*720) -;fbx format (4:RGB655 5:RGB565 6:RGB556 7:ARGB1555 8:RGBA5551 9:RGB888 10:ARGB8888 12:ARGB4444) -;fbx pixel sequence (0:ARGB 1:BGRA 2:ABGR 3:RGBA) --- 0 for linux, 2 for android -;lcd0_bright (lcd0 init bright,the range:[0,256],default:197 -;lcd1_bright (lcd1 init bright,the range:[0,256],default:197 -;------------------------------------------------------------------------------- -[disp_init] -disp_init_enable = 1 -disp_mode = 2 - -screen0_output_type = 3 -screen0_output_mode = 9 - -screen1_output_type = 4 -screen1_output_mode = 4 - -fb0_width = 1920 -fb0_height = 1080 -fb0_framebuffer_num = 4 -fb0_format = 10 -fb0_pixel_sequence = 0 -fb0_scaler_mode_enable = 1 - -fb1_width = 1024 -fb1_height = 768 -fb1_framebuffer_num = 4 -fb1_format = 10 -fb1_pixel_sequence = 0 -fb1_scaler_mode_enable = 0 - -lcd0_backlight = 197 -lcd1_backlight = 197 - -lcd0_bright = 50 -lcd0_contrast = 50 -lcd0_saturation = 57 -lcd0_hue = 50 - -lcd1_bright = 50 -lcd1_contrast = 50 -lcd1_saturation = 57 -lcd1_hue = 50 - -;------------------------------------------------------------------------------- -;lcd0 configuration - -;lcd_dclk_freq: in MHZ unit -;lcd_pwm_freq: in HZ unit -;lcd_if: 0:hv(sync+de); 1:8080; 2:ttl; 3:lvds -;lcd_hbp: hsync back porch -;lcd_ht: hsync total cycle -;lcd_vbp: vsync back porch -;lcd_vt: vysnc total cycle *2 -;lcd_hv_if: 0:hv parallel 1:hv serial -;lcd_hv_smode: 0:RGB888 1:CCIR656 -;lcd_hv_s888_if serial RGB format -;lcd_hv_syuv_if: serial YUV format -;lcd_hspw: hsync plus width -;lcd_vspw: vysnc plus width -;lcd_lvds_ch: 0:single channel; 1:dual channel -;lcd_lvds_mode: 0:NS mode; 1:JEIDA mode -;lcd_lvds_bitwidth: 0:24bit; 1:18bit -;lcd_lvds_io_cross: 0:normal; 1:pn cross -;lcd_cpu_if: 0:18bit; 1:16bit mode0; 2:16bit mode1; 3:16bit mode2; 4:16bit mode3; 5:9bit; 6:8bit 256K; 7:8bit 65K -;lcd_frm: 0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither - -;lcd_gpio_0: SCL -;lcd_gpio_1 SDA -;------------------------------------------------------------------------------- -[lcd0_para] -lcd_used = 1 - -lcd_x = 1024 -lcd_y = 600 -lcd_dclk_freq = 51 -lcd_pwm_not_used = 0 -lcd_pwm_ch = 0 -lcd_pwm_freq = 10000 -lcd_pwm_pol = 1 -lcd_max_bright = 240 -lcd_min_bright = 64 -lcd_if = 0 -lcd_hbp = 158 -lcd_ht = 1344 -lcd_vbp = 25 -lcd_vt = 1270 -lcd_vspw = 3 -lcd_hspw = 20 -lcd_hv_if = 0 -lcd_hv_smode = 0 -lcd_hv_s888_if = 0 -lcd_hv_syuv_if = 0 -lcd_lvds_ch = 0 -lcd_lvds_mode = 0 -lcd_lvds_bitwidth = 0 -lcd_lvds_io_cross = 0 -lcd_cpu_if = 0 -lcd_frm = 1 -lcd_io_cfg0 = 0x00000000 -lcd_gamma_correction_en = 0 -lcd_gamma_tbl_0 = 0x00000000 -lcd_gamma_tbl_1 = 0x00010101 -lcd_gamma_tbl_255 = 0x00ffffff - -lcd_bl_en_used = 0 -lcd_bl_en = port:PH07<1><0><1> - -lcd_power_used = 0 -lcd_power = port:PH08<1><0><1> - -lcd_pwm_used = 0 -lcd_pwm = port:PB02<2><0> - -lcdd0 = port:PD00<2><0> -lcdd1 = port:PD01<2><0> -lcdd2 = port:PD02<2><0> -lcdd3 = port:PD03<2><0> -lcdd4 = port:PD04<2><0> -lcdd5 = port:PD05<2><0> -lcdd6 = port:PD06<2><0> -lcdd7 = port:PD07<2><0> -lcdd8 = port:PD08<2><0> -lcdd9 = port:PD09<2><0> -lcdd10 = port:PD10<2><0> -lcdd11 = port:PD11<2><0> -lcdd12 = port:PD12<2><0> -lcdd13 = port:PD13<2><0> -lcdd14 = port:PD14<2><0> -lcdd15 = port:PD15<2><0> -lcdd16 = port:PD16<2><0> -lcdd17 = port:PD17<2><0> -lcdd18 = port:PD18<2><0> -lcdd19 = port:PD19<2><0> -lcdd20 = port:PD20<2><0> -lcdd21 = port:PD21<2><0> -lcdd22 = port:PD22<2><0> -lcdd23 = port:PD23<2><0> -lcdclk = port:PD24<2><0> -lcdde = port:PD25<2><0> -lcdhsync = port:PD26<2><0> -lcdvsync = port:PD27<2><0> - -;---------------------------------------------------------------------------------- -;lcd1 configuration - -;lcd_dclk_freq: in MHZ unit -;lcd_pwm_freq: in HZ unit -;lcd_if: 0:hv(sync+de); 1:8080; 2:ttl; 3:lvds -;lcd_hbp: hsync back porch -;lcd_ht: hsync total cycle -;lcd_vbp: vsync back porch -;lcd_vt: vysnc total cycle *2 -;lcd_hv_if: 0:hv parallel 1:hv serial -;lcd_hv_smode: 0:RGB888 1:CCIR656 -;lcd_hv_s888_if serial RGB format -;lcd_hv_syuv_if: serial YUV format -;lcd_hspw: hsync plus width -;lcd_vspw: vysnc plus width -;lcd_lvds_ch: 0:single channel; 1:dual channel -;lcd_lvds_mode: 0:NS mode; 1:JEIDA mode -;lcd_lvds_bitwidth: 0:24bit; 1:18bit -;lcd_lvds_io_cross: 0:normal; 1:pn cross -;lcd_cpu_if: 0:18bit; 1:16bit mode0; 2:16bit mode1; 3:16bit mode2; 4:16bit mode3; 5:9bit; 6:8bit 256K; 7:8bit 65K -;lcd_frm: 0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither - -;lcd_gpio_0: SCL -;lcd_gpio_1 SDA -;---------------------------------------------------------------------------------- -[lcd1_para] -lcd_used = 0 - -lcd_x = 0 -lcd_y = 0 -lcd_dclk_freq = 0 -lcd_pwm_not_used = 0 -lcd_pwm_ch = 1 -lcd_pwm_freq = 0 -lcd_pwm_pol = 0 -lcd_max_bright = 240 -lcd_min_bright = 64 -lcd_if = 0 -lcd_hbp = 0 -lcd_ht = 0 -lcd_vbp = 0 -lcd_vt = 0 -lcd_vspw = 0 -lcd_hspw = 0 -lcd_hv_if = 0 -lcd_hv_smode = 0 -lcd_hv_s888_if = 0 -lcd_hv_syuv_if = 0 -lcd_lvds_ch = 0 -lcd_lvds_mode = 0 -lcd_lvds_bitwidth = 0 -lcd_lvds_io_cross = 0 -lcd_cpu_if = 0 -lcd_frm = 0 -lcd_io_cfg0 = 0 -lcd_gamma_correction_en = 0 -lcd_gamma_tbl_0 = 0x00000000 -lcd_gamma_tbl_1 = 0x00010101 -lcd_gamma_tbl_255 = 0x00ffffff - -lcd_bl_en_used = 0 -lcd_bl_en = - -lcd_power_used = 0 -lcd_power = - -lcd_pwm_used = 1 -lcd_pwm = port:PI03<2><0> - -lcd_gpio_0 = -lcd_gpio_1 = -lcd_gpio_2 = -lcd_gpio_3 = - -lcdd0 = port:PH00<2><0> -lcdd1 = port:PH01<2><0> -lcdd2 = port:PH02<2><0> -lcdd3 = port:PH03<2><0> -lcdd4 = port:PH04<2><0> -lcdd5 = port:PH05<2><0> -lcdd6 = port:PH06<2><0> -lcdd7 = port:PH07<2><0> -lcdd8 = port:PH08<2><0> -lcdd9 = port:PH09<2><0> -lcdd10 = port:PH10<2><0> -lcdd11 = port:PH11<2><0> -lcdd12 = port:PH12<2><0> -lcdd13 = port:PH13<2><0> -lcdd14 = port:PH14<2><0> -lcdd15 = port:PH15<2><0> -lcdd16 = port:PH16<2><0> -lcdd17 = port:PH17<2><0> -lcdd18 = port:PH18<2><0> -lcdd19 = port:PH19<2><0> -lcdd20 = port:PH20<2><0> -lcdd21 = port:PH21<2><0> -lcdd22 = port:PH22<2><0> -lcdd23 = port:PH23<2><0> -lcdclk = port:PH24<2><0> -lcdde = port:PH25<2><0> -lcdhsync = port:PH26<2><0> -lcdvsync = port:PH27<2><0> - -;------------------------------------------------------------------------------- -;tv out dac configuration -;dacx_src: 0:composite; 1:luma; 2:chroma; 4:Y; 5:Pb; 6: Pr; 7:none -;------------------------------------------------------------------------------- -[tv_out_dac_para] -dac_used = 1 -dac0_src = 4 -dac1_src = 5 -dac2_src = 6 -dac3_src = 0 - -;---------------------------------------------------------------------------------- -;hdmi configuration -;---------------------------------------------------------------------------------- -[hdmi_para] -hdmi_used = 1 - - -[camera_list_para] -camera_list_para_used = 1 -ov7670 = 0 -gc0308 = 1 -gt2005 = 1 -hi704 = 0 -sp0838 = 0 -mt9m112 = 0 -mt9m113 = 0 -ov2655 = 0 -hi253 = 0 -gc0307 = 0 -mt9d112 = 0 -ov5640 = 0 -gc2015 = 0 -ov2643 = 0 -gc0329 = 0 -gc0309 = 0 -tvp5150 = 0 -s5k4ec = 0 -ov5650_mv9335 = 0 -siv121d = 0 -gc2035 = 0 - -;-------------------------------------------------------------------------------- -;csi gpio configuration -;csi_if: 0:hv_8bit 1:hv_16bit 2:hv_24bit 3:bt656 1ch 4:bt656 2ch 5:bt656 4ch -;csi_mode: 0:sample one csi to one buffer 1:sample two csi to one buffer -;csi_dev_qty: The quantity of devices linked to csi interface -;csi_vflip: flip in vertical direction 0:disable 1:enable -;csi_hflip: flip in horizontal direction 0:disable 1:enable -;csi_stby_mode: 0:not shut down power at standby 1:shut down power at standby -;csi_iovdd: camera module io power , pmu power supply -;csi_avdd: camera module analog power , pmu power supply -;csi_dvdd: camera module core power , pmu power supply -;pmu_ldo3: fill "axp20_pll" -;pmu_ldo4: fill "axp20_hdmi" -;fill "" when not using any pmu power supply -;csi_flash_pol: the active polority of the flash light IO 0:low active 1:high active -;-------------------------------------------------------------------------------- - -[csi0_para] -csi_used = 0 - -csi_dev_qty = 2 -csi_stby_mode = 0 -csi_mname = "gc0308" -csi_twi_id = 1 -csi_twi_addr = 0x42 -csi_if = 0 -csi_vflip = 0 -csi_hflip = 0 -csi_iovdd = "axp20_pll" -csi_avdd = "" -csi_dvdd = "" -csi_vol_iovdd = 2800 -csi_vol_dvdd = -csi_vol_avdd = -csi_flash_pol = 0 - -csi_mname_b = "gt2005" -csi_twi_id_b = 1 -csi_twi_addr_b = 0x78 -csi_if_b = 0 -csi_vflip_b = 0 -csi_hflip_b = 0 -csi_iovdd_b = "axp20_pll" -csi_avdd_b = "" -csi_dvdd_b = "" -csi_vol_iovdd_b = 2800 -csi_vol_avdd_b = -csi_vol_dvdd_b = -csi_flash_pol_b = 0 - -csi_pck = port:PE00<3> -csi_ck = port:PE01<3> -csi_hsync = port:PE02<3> -csi_vsync = port:PE03<3> -csi_d0 = port:PE04<3> -csi_d1 = port:PE05<3> -csi_d2 = port:PE06<3> -csi_d3 = port:PE07<3> -csi_d4 = port:PE08<3> -csi_d5 = port:PE09<3> -csi_d6 = port:PE10<3> -csi_d7 = port:PE11<3> -csi_reset = port:PH14<1><0> -csi_power_en = port:PH17<1><0> -csi_stby = port:PH19<1><0> -csi_flash = -csi_af_en = -csi_reset_b = port:PH14<1><0> -csi_power_en_b = port:PH17<1><0> -csi_stby_b = port:PH18<1><0> -csi_flash_b = -csi_af_en_b = - -[csi1_para] -csi_used = 0 - -csi_dev_qty = 1 -csi_stby_mode = 0 -csi_mname = "gc0308" -csi_if = 0 -csi_iovdd = "axp20_pll" -csi_avdd = "" -csi_dvdd = "" -csi_vol_iovdd = 2800 -csi_vol_dvdd = -csi_vol_avdd = -csi_vflip = 0 -csi_hflip = 0 -csi_flash_pol = 0 -csi_facing = 1 - -csi_twi_id = 1 -csi_twi_addr = 0x42 -csi_pck = port:PG00<3> -csi_ck = port:PG01<3> -csi_hsync = port:PG02<3> -csi_vsync = port:PG03<3> -csi_d0 = port:PG04<3> -csi_d1 = port:PG05<3> -csi_d2 = port:PG06<3> -csi_d3 = port:PG07<3> -csi_d4 = port:PG08<3> -csi_d5 = port:PG09<3> -csi_d6 = port:PG10<3> -csi_d7 = port:PG11<3> -csi_reset = port:PH13<1><0> -csi_power_en = port:PH16<1><0> -csi_stby = port:PH19<1><0> - -;------------------------------------------------------------------------------- -;tv configuration -; -;------------------------------------------------------------------------------- -[tvout_para] -tvout_used = 1 -tvout_channel_num = 1 - -[tvin_para] -tvin_used = 0 -tvin_channel_num = 4 - -[pwm0_para] -pwm_used = 1 -pwm_period = 20 -pwm_duty_percent = 50 - -;------------------------------------------------------------------------------- -;sata configuration -; -;------------------------------------------------------------------------------- -[sata_para] -sata_used = 1 -sata_power_en = port:PH12<1><0> - - -;------------------------------------------------------------------------------- -; SDMMC PINS MAPPING -; ------------------------------------------------------------------------------ -; Config Guide -; sdc_used: 1-enable card, 0-disable card -; sdc_detmode: card detect mode -; 1-detect card by gpio polling -; 2-detect card by gpio irq(must use IO with irq function) -; 3-no detect, always in for boot card -; 4-manually insert and remove by /proc/driver/sunxi-mmc.x/insert -; sdc_buswidth: card bus width, 1-1bit, 4-4bit, 8-8bit -; sdc_use_wp: 1-with write protect IO, 0-no write protect IO -; sdc_isio: for sdio card -; sdc_regulator: power control. -; other: GPIO Mapping configuration -; ------------------------------------------------------------------------------ -; Note: -; 1 if detmode=2, sdc_det's config=6 -; else if detmode=1, sdc_det's config=0 -; else sdc_det IO is not necessary -; 2 if the customer wants to support UHS-I and HS200 features, he must provide -; an independent power supply for the card. This is only used in platforms -; that supports SD3.0 cards and eMMC4.4+ flashes -;------------------------------------------------------------------------------- -[mmc0_para] -sdc_used = 1 -sdc_detmode = 1 -sdc_buswidth = 4 -sdc_clk = port:PF02<2><1><2> -sdc_cmd = port:PF03<2><1><2> -sdc_d0 = port:PF01<2><1><2> -sdc_d1 = port:PF00<2><1><2> -sdc_d2 = port:PF05<2><1><2> -sdc_d3 = port:PF04<2><1><2> -sdc_det = port:PH1<0><1> -sdc_use_wp = 0 -sdc_wp = -sdc_isio = 0 -sdc_regulator = "none" - -[mmc1_para] -sdc_used = 0 -sdc_detmode = 4 -sdc_buswidth = 4 -sdc_clk = port:PG00<2><1><2> -sdc_cmd = port:PG01<2><1><2> -sdc_d0 = port:PG02<2><1><2> -sdc_d1 = port:PG03<2><1><2> -sdc_d2 = port:PG04<2><1><2> -sdc_d3 = port:PG05<2><1><2> -sdc_det = -sdc_use_wp = 0 -sdc_wp = -sdc_isio = 0 -sdc_regulator = "none" - -[mmc2_para] -sdc_used = 0 -sdc_detmode = 3 -sdc_buswidth = 4 -sdc_cmd = port:PC06<3><1><2> -sdc_clk = port:PC07<3><1><2> -sdc_d0 = port:PC08<3><1><2> -sdc_d1 = port:PC09<3><1><2> -sdc_d2 = port:PC10<3><1><2> -sdc_d3 = port:PC11<3><1><2> -sdc_det = -sdc_use_wp = 0 -sdc_wp = -sdc_isio = 0 -sdc_regulator = "none" - -[mmc3_para] -sdc_used = 1 -sdc_detmode = 4 -sdc_buswidth = 4 -sdc_cmd = port:PI04<2><1><2> -sdc_clk = port:PI05<2><1><2> -sdc_d0 = port:PI06<2><1><2> -sdc_d1 = port:PI07<2><1><2> -sdc_d2 = port:PI08<2><1><2> -sdc_d3 = port:PI09<2><1><2> -sdc_det = -sdc_use_wp = 0 -sdc_wp = -sdc_isio = 1 -sdc_regulator = "none" - -; ------------------------------------------------------------------------------ -; memory stick configuration -;------------------------------------------------------------------------------- -[ms_para] -ms_used = 0 -ms_bs = port:PH06<5> -ms_clk = port:PH07<5> -ms_d0 = port:PH08<5> -ms_d1 = port:PH09<5> -ms_d2 = port:PH10<5> -ms_d3 = port:PH11<5> -ms_det = - -; ------------------------------------------------------------------------------ -; sim card configuration -;------------------------------------------------------------------------------- -[smc_para] -smc_used = 0 -smc_rst = port:PH13<5> -smc_vppen = port:PH14<5> -smc_vppp = port:PH15<5> -smc_det = port:PH16<5> -smc_vccen = port:PH17<5> -smc_sck = port:PH18<5> -smc_sda = port:PH19<5> - -;------------------------------------------------------------------------------- -;ps2 configuration -;------------------------------------------------------------------------------- -[ps2_0_para] -ps2_used = 0 -ps2_scl = port:PI20<2><1> -ps2_sda = port:PI21<2><1> - -[ps2_1_para] -ps2_used = 0 -ps2_scl = port:PI14<3><1> -ps2_sda = port:PI15<3><1> - -;------------------------------------------------------------------------------- -;can bus configuration -;------------------------------------------------------------------------------- -[can_para] -can_used = 0 -can_tx = port:PA16<3> -can_rx = port:PA17<3> - -;------------------------------------------------------------------------------- -;key matrix -;------------------------------------------------------------------------------- -[keypad_para] -kp_used = 0 -kp_in_size = 8 -kp_out_size = 8 -kp_in0 = port:PH08<4><1> -kp_in1 = port:PH09<4><1> -kp_in2 = port:PH10<4><1> -kp_in3 = port:PH11<4><1> -kp_in4 = port:PH14<4><1> -kp_in5 = port:PH15<4><1> -kp_in6 = port:PH16<4><1> -kp_in7 = port:PH17<4><1> -kp_out0 = port:PH18<4><1> -kp_out1 = port:PH19<4><1> -kp_out2 = port:PH22<4><1> -kp_out3 = port:PH23<4><1> -kp_out4 = port:PH24<4><1> -kp_out5 = port:PH25<4><1> -kp_out6 = port:PH26<4><1> -kp_out7 = port:PH27<4><1> - - -;------------------------------------------------------------------------------- -;[usbc0]：控制器0的配置。 -;usb_used：USB使能标志。置1，表示系统中USB模块可用,置0,则表示系统USB禁用。 -;usb_port_type：USB端口的使用情况。 0：device only;1：host only;2：OTG -;usb_detect_type：USB端口的检查方式。0：不做检测;1：vbus/id检查;2：id/dpdm检查 -;usb_id_gpio：USB ID pin脚配置。具体请参考gpio配置说明。 -;usb_det_vbus_gpio：USB DET_VBUS pin脚配置。具体请参考gpio配置说明。 -;usb_drv_vbus_gpio：USB DRY_VBUS pin脚配置。具体请参考gpio配置说明。 -;usb_det_vbus_gpio: "axp_ctrl",表示axp 提供 -;usb_restrict_gpio usb限流控制pin -;usb_restric_flag: usb限流标置 -;------------------------------------------------------------------------------- -;------------------------------------------------------------------------------- -;--- USB0控制标志 -;------------------------------------------------------------------------------- -[usbc0] -usb_used = 1 -usb_port_type = 2 -usb_detect_type = 0 -usb_id_gpio = port:PH19<0><1> -usb_det_vbus_gpio = port:PH22<1><0><0> -usb_drv_vbus_gpio = port:PH17<1><0><0> -usb_restrict_gpio = port:PH00<1><0><0> -usb_host_init_state = 1 -usb_restric_flag = 0 -usb_restric_voltage = 3550000 -usb_restric_capacity= 5 - -;------------------------------------------------------------------------------- -;--- USB1控制标志 -;------------------------------------------------------------------------------ -[usbc1] -usb_used = 1 -usb_port_type = 1 -usb_detect_type = 0 -usb_drv_vbus_gpio = port:PH06<1><0><0> -usb_restrict_gpio = -usb_host_init_state = 1 -usb_restric_flag = 0 - -;------------------------------------------------------------------------------ -;--- USB2控制标志 -;------------------------------------------------------------------------------ -[usbc2] -usb_used = 1 -usb_port_type = 1 -usb_detect_type = 0 -usb_drv_vbus_gpio = port:PH03<1><0><0> -usb_restrict_gpio = - -usb_host_init_state = 1 -usb_restric_flag = 0 - -;-------------------------------- -;--- USB Device -;-------------------------------- -[usb_feature] -vendor_id = 0x18D1 -mass_storage_id = 0x0001 -adb_id = 0x0002 - -manufacturer_name = "USB Developer" -product_name = "Android" -serial_number = "20080411" - -[msc_feature] -vendor_name = "USB 2.0" -product_name = "USB Flash Driver" -release = 100 -luns = 3 - -;------------------------------------------------------------------------------- -; G sensor configuration -; gs_twi_id --- TWI ID for controlling Gsensor (0: TWI0, 1: TWI1, 2: TWI2) -;------------------------------------------------------------------------------- -[gsensor_para] -gsensor_used = 0 -gsensor_twi_id = 1 -gsensor_int1 = -gsensor_int2 = - -;-------------------------------------------------------------------------------- -; G sensor automatic detection configuration -;gsensor_detect_used --- Whether startup automatic inspection function. 1:used,0:unused -;Module name postposition 1 said detection, 0 means no detection. -;-------------------------------------------------------------------------------- -[gsensor_list_para] -gsensor_det_used = 1 -bma250 = 1 -mma8452 = 1 -mma7660 = 1 -mma865x = 1 -afa750 = 1 -lis3de_acc = 1 -lis3dh_acc = 1 -kxtik = 1 -dmard10 = 0 -dmard06 = 1 -mxc622x = 1 -fxos8700 = 1 -lsm303d = 1 - -;------------------------------------------------------------------------------- -; gps gpio configuration -; gps_spi_id --- the index of SPI controller. 0: SPI0, 1: SPI1, 2: SPI2, 15: no SPI used -; gps_spi_cs_num --- the chip select number of SPI controller. 0: SPI CS0, 1: SPI CS1 -; gps_lradc --- the lradc number for GPS used. 0 and 1 is valid, set 2 if not use lradc -;------------------------------------------------------------------------------- -[gps_para] -gps_used = 0 -gps_spi_id = 2 -gps_spi_cs_num = 0 -gps_lradc = 1 -gps_clk = port:PI00<2> -gps_sign = port:PI01<2> -gps_mag = port:PI02<2> -gps_vcc_en = port:PC22<1><0> -gps_osc_en = port:PI14<1><0> -gps_rx_en = port:PI15<1><0> - -;-------------------------------------------------------------------------------- -;wifi configuration -;wifi_sdc_id --- 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3 -;wifi_usbc_id --- 0- USB0, 1- USB1, 2- USB2 -;wifi_usbc_type -- 1- EHCI(speed 2.0), 2- OHCI(speed 1.0) -;wifi_mod_sel --- 0- none, 1- bcm40181, 2- bcm40183(wifi+bt), -; 3 - rtl8723as(wifi+bt), 4- rtl8189es(SM89E00), -; 5 - rtl8192cu, 6 - rtl8188eu, 7 - ap6210 -; 8 - ap6330 -;-------------------------------------------------------------------------------- -[wifi_para] -wifi_used = 1 -wifi_sdc_id = 3 -wifi_usbc_id = 2 -wifi_usbc_type = 1 -wifi_mod_sel = 7 -wifi_power = "" - -; 1 - bcm40181 sdio wifi gpio config -;bcm40181_shdn = port:PH09<1><0> -;bcm40181_host_wake = port:PH10<0><0> - -; 2 - bcm40183 sdio wifi gpio config -;bcm40183_wl_regon = port:PH09<1><0> -;bcm40183_wl_host_wake = port:PH10<0><0> -;bcm40183_bt_rst = port:PB05<1><0> -;bcm40183_bt_regon = port:PB05<1><0> -;bcm40183_bt_wake = port:PI20<1><0> -;bcm40183_bt_host_wake = port:PI21<0><0> - -; 3 - rtl8723as sdio wifi + bt gpio config -;rtk_rtl8723as_wl_dis = port:PH09<1><0> -;rtk_rtl8723as_bt_dis = port:PB05<1><0> -;rtk_rtl8723as_wl_host_wake = port:PH10<0><0> -;rtk_rtl8723as_bt_host_wake = port:PI21<0><0> - -; 4 - rtl8189es sdio wifi gpio config -;rtl8189es_shdn = port:PH09<1><0> -;rtl8189es_wakeup = port:PH10<1><1> - -; 5 - rtl8192cu usb wifi - -; 6 - rtl8188eu usb wifi - -; 7 - ap6210 sdio wifi + bt gpio config -; 8 - ap6330 sdio wifi + bt gpio config -ap6xxx_wl_regon = port:PH09<1><0> -;ap6xxx_wl_host_wake = port:PH10<0><0> -ap6xxx_bt_regon = port:PH18<1><0> -ap6xxx_bt_wake = port:PH24<1><0> -ap6xxx_bt_host_wake = port:PH25<0><0> -ap6xxx_lpo = port:PI12<4><1><1> - -[usb_wifi_para] -usb_wifi_used = 0 -usb_wifi_usbc_num = 2 - -;------------------------------------------------------------------------------- -;3G configuration -;------------------------------------------------------------------------------- -[3g_para] -3g_used = 0 -3g_usbc_num = 2 -3g_uart_num = 0 -3g_pwr = -3g_wakeup = -3g_int = - -;------------------------------------------------------------------------------- -;gyroscope -;------------------------------------------------------------------------------- -[gy_para] -gy_used = 0 -gy_twi_id = 1 -gy_twi_addr = 0x00 -gy_int1 = port:PH18<6><1> -gy_int2 = port:PH19<6><1> - -;------------------------------------------------------------------------------- -;light sensor -;------------------------------------------------------------------------------- -[ls_para] -ls_used = 0 -ls_twi_id = 1 -ls_twi_addr = 0x00 -ls_int = port:PH20<6><1> - -;------------------------------------------------------------------------------- -;compass -;------------------------------------------------------------------------------- -[compass_para] -compass_used = 0 -compass_twi_id = 1 -compass_twi_addr = 0x00 -compass_int = port:PI13<6><1> - -;------------------------------------------------------------------------------- -;blue tooth -;bt_used ---- blue tooth used (0- no used, 1- used) -;bt_uard_id ---- uart index -;------------------------------------------------------------------------------- -[bt_para] -bt_used = 1 -bt_uart_id = 2 - -[i2s_para] -i2s_used = 1 -i2s_channel = 2 -i2s_mclk = port:PB5<2><1> -i2s_bclk = port:PB6<2><1> -i2s_lrclk = port:PB7<2><1> -i2s_dout0 = port:PB8<2><1> -i2s_dout1 = -i2s_dout2 = -i2s_dout3 = -i2s_din = port:PB12<2><1> - -[spdif_para] -spdif_used = 1 -spdif_mclk = -spdif_dout = port:PB13<4><1> -spdif_din = - -[audio_para] -audio_used = 1 -audio_pa_ctrl = port:PH15<1><0> - -[switch_para] -switch_used=1 - -;------------------------------------------------------------------------------- -;ir --- infra remote configuration -;------------------------------------------------------------------------------- -[ir_para] -ir_used = 1 -ir0_rx = port:PB04<2> - - -;------------------------------------------------------------------------------- -;pmu_twi_addr ---slave address -;pmu_twi_id ---i2c bus number (0 TWI0, 1 TWI2, 2 TWI3) -;pmu_irq_id ---irq number (0 irq0,1 irq1,……) -;pmu_battery_rdc ---battery initial resistance,mΩ,根据实际电池内阻填写 -;pmu_battery_cap ---battery capability,mAh，根据实际电池容量填写 -;pmu_init_chgcur ---set initial charging current limite,mA，300/400/500/600/700/800/900/1000/1100/1200/1300/1400/1500/1600/1700/1800 -;pmu_suspend_chgcur ---set suspend charging current limite,mA，300/400/500/600/700/800/900/1000/1100/1200/1300/1400/1500/1600/1700/1800 -;pmu_resume_chgcur ---set resume charging current limite,mA，300/400/500/600/700/800/900/1000/1100/1200/1300/1400/1500/1600/1700/1800 -;pmu_shutdown_chgcur ---set shutdown charging current limite,mA，300/400/500/600/700/800/900/1000/1100/1200/1300/1400/1500/1600/1700/1800 -;pmu_init_chgvol ---set initial charing target voltage,mV,4100/4150/4200/4360 -;pmu_init_chgend_rate ---set initial charing end current rate,10/15 -;pmu_init_chg_enabled ---set initial charing enabled,0:关闭,1:打开 -;pmu_init_adc_freq ---set initial adc frequency,Hz,25/50/100/200 -;pmu_init_adc_freqc ---set initial coulomb adc coufrequency,Hz,25/50/100/200 -;pmu_init_chg_pretime ---set initial pre-charging time,min,40/50/60/70 -;pmu_init_chg_csttime ---set initial constance-charging time,min,360/480/600/720 -;pmu_bat_para1 ---battery indication at 3.1328V -;pmu_bat_para2 ---battery indication at 3.2736V -;pmu_bat_para3 ---battery indication at 3.4144V -;pmu_bat_para4 ---battery indication at 3.5552V -;pmu_bat_para5 ---battery indication at 3.6256V -;pmu_bat_para6 ---battery indication at 3.6608V -;pmu_bat_para7 ---battery indication at 3.6960V -;pmu_bat_para8 ---battery indication at 3.7312V -;pmu_bat_para9 ---battery indication at 3.7664V -;pmu_bat_para10 ---battery indication at 3.8016V -;pmu_bat_para11 ---battery indication at 3.8368V -;pmu_bat_para12 ---battery indication at 3.8720V -;pmu_bat_para13 ---battery indication at 3.9424V -;pmu_bat_para14 ---battery indication at 4.0128V -;pmu_bat_para15 ---battery indication at 4.0832V -;pmu_bat_para16 ---battery indication at 4.1536V -;pmu_usbvol ---set usb-ac limited voltage level,mV,4000/4100/4200/4300/4400/4500/4600/4700,0 - not limite -;pmu_usbcur ---set usb-ac limited voltage level,mA,100/500/900, 0 - not limite -;pmu_usbvol_pc ---set usb-pc limited voltage level,mV,4000/4100/4200/4300/4400/4500/4600/4700,0 - not limite -;pmu_usbcur_pc ---set usb-pc limited voltage level,mA,100/500/900, 0 - not limite -;pmu_pwroff_vol ---set protect voltage when system start up,mV,2600/2700/2800/2900/3000/3100/3200/3300 -;pmu_pwron_vol ---set protect voltage after system start up,mV,2600/2700/2800/2900/3000/3100/3200/3300 -;pmu_pekoff_time ---set pek off time,ms, 4000/6000/8000/10000 -;pmu_pekoff_en ---set pek off enable, 0:关闭,1:打开 -;pmu_peklong_time ---set pek pek long irq time,ms,1000/1500/2000/2500 -;pmu_pekon_time ---set pek on time,ms,128/1000/2000/3000 -;pmu_pwrok_time ---set pmu pwrok delay time,ms,8/64 -;pmu_pwrnoe_time ---set pmu n_oe power down delay time,ms,128/1000/2000/3000 -;pmu_intotp_en ---set pmu power down when overtempertur enable,0:关闭，1：打开 -;pmu_suspendpwroff_vol ---set pmu shutdown voltage when cpu is suspend and battery voltage is low -;pmu_batdeten ---set pmu battery detect enabled,0:关闭，1：打开 -;------------------------------------------------------------------------------- -[pmu_para] -pmu_used = 1 -pmu_twi_addr = 0x34 -pmu_twi_id = 0 -pmu_irq_id = 32 -pmu_battery_rdc = 120 -pmu_battery_cap = 2100 -pmu_init_chgcur = 300 -pmu_earlysuspend_chgcur = 600 -pmu_suspend_chgcur = 1000 -pmu_resume_chgcur = 300 -pmu_shutdown_chgcur = 1000 -pmu_init_chgvol = 4200 -pmu_init_chgend_rate = 15 -pmu_init_chg_enabled = 1 -pmu_init_adc_freq = 100 -pmu_init_adc_freqc = 100 -pmu_init_chg_pretime = 50 -pmu_init_chg_csttime = 720 - -pmu_bat_para1 = 0 -pmu_bat_para2 = 0 -pmu_bat_para3 = 0 -pmu_bat_para4 = 0 -pmu_bat_para5 = 5 -pmu_bat_para6 = 11 -pmu_bat_para7 = 13 -pmu_bat_para8 = 15 -pmu_bat_para9 = 19 -pmu_bat_para10 = 32 -pmu_bat_para11 = 50 -pmu_bat_para12 = 58 -pmu_bat_para13 = 71 -pmu_bat_para14 = 81 -pmu_bat_para15 = 89 -pmu_bat_para16 = 100 - -pmu_usbvol_limit = 1 -pmu_usbcur_limit = 0 -pmu_usbvol = 4000 -pmu_usbcur = 0 - -pmu_usbvol_pc = 4200 -pmu_usbcur_pc = 0 - -pmu_pwroff_vol = 3300 -pmu_pwron_vol = 2900 - -pmu_pekoff_time = 6000 -pmu_pekoff_en = 1 -pmu_peklong_time = 1500 -pmu_pekon_time = 1000 -pmu_pwrok_time = 64 -pmu_pwrnoe_time = 2000 -pmu_intotp_en = 1 - -pmu_used2 = 0 -pmu_adpdet = port:PH02<0> -pmu_init_chgcur2 = 400 -pmu_earlysuspend_chgcur2 = 600 -pmu_suspend_chgcur2 = 1200 -pmu_resume_chgcur2 = 400 -pmu_shutdown_chgcur2 = 1200 - -pmu_suspendpwroff_vol = 3500 - -pmu_batdeten = 1 -pmu_backupen = 1 - -[recovery_key] -key_min = 4 -key_max = 40 - -;---------------------------------------------------------------------------------- -; dvfs voltage-frequency table configuration -; -; max_freq: cpu maximum frequency, based on Hz, can not be more than 1008MHz -; min_freq: cpu minimum frequency, based on Hz, can not be less than 60MHz -; -; LV_count: count of LV_freq/LV_volt, must be < 16 -; -; LV1: core vdd is 1.45v if cpu frequency is (912Mhz, 1008Mhz] -; LV2: core vdd is 1.40v if cpu frequency is (864Mhz, 912Mhz] -; LV3: core vdd is 1.30v if cpu frequency is (720Mhz, 864Mhz] -; LV4: core vdd is 1.20v if cpu frequency is (528Mhz, 720Mhz] -; LV5: core vdd is 1.10v if cpu frequency is (312Mhz, 528Mhz] -; LV6: core vdd is 1.00v if cpu frequency is (144Mhz, 312Mhz] -; LV7: core vdd is 0.90v if cpu frequency is (60Mhz, 144Mhz] -; -;---------------------------------------------------------------------------------- -[dvfs_table] -max_freq = 912000000 -min_freq = 720000000 -normal_freq = 720000000 - -LV_count = 7 - -LV1_freq = 1008000000 -LV1_volt = 1450 - -LV2_freq = 912000000 -LV2_volt = 1425 - -LV3_freq = 864000000 -LV3_volt = 1350 - -LV4_freq = 720000000 -LV4_volt = 1250 - -LV5_freq = 528000000 -LV5_volt = 1150 - -LV6_freq = 312000000 -LV6_volt = 1100 - -LV7_freq = 144000000 -LV7_volt = 1050 - -[boot_disp] -output_type = 3 -output_mode = 4 -auto_hpd = 1 - diff --git a/srcpkgs/cubietruck-uboot/template b/srcpkgs/cubietruck-uboot/template deleted file mode 100644 index 145148c082..0000000000 --- a/srcpkgs/cubietruck-uboot/template +++ /dev/null @@ -1,35 +0,0 @@ -# Template file for 'cubietruck-uboot' -pkgname=cubietruck-uboot -version=2015.04 -revision=2 -wrksrc="u-boot-${version}" -hostmakedepends="sunxi-tools uboot-mkimage" -short_desc="Cubietruck U-Boot files for SD booting" -maintainer="Jürgen Buchmüller " -license="GPL-2" -homepage="https://github.com/RobertCNelson/u-boot" -distfiles="https://codeload.github.com/RobertCNelson/u-boot/tar.gz/v${version}>u-boot-${version}.tar.gz" -checksum=b7cc9d61eb958ed794918aef72a92f07f41315c164cd9ace5a6ca18e3db4b0e1 - -only_for_archs="armv7l" - -do_build() { - unset CFLAGS CXXFLAGS LDFLAGS - - if [ "$CROSS_BUILD" ]; then - make CROSS_COMPILE=${XBPS_CROSS_TRIPLET}- Cubietruck_config - make CROSS_COMPILE=${XBPS_CROSS_TRIPLET}- - else - make Cubietruck_config - make - fi - mkimage -C none -A arm -T script -d ${FILESDIR}/cubietruck.bootcmd boot.scr - fex2bin ${FILESDIR}/cubietruck.fex script.bin -} - -do_install() { - vinstall u-boot-sunxi-with-spl.bin 644 boot - vinstall script.bin 644 boot - vinstall boot.scr 644 boot - vinstall ${FILESDIR}/cubietruck.bootcmd 644 boot boot.cmd -}