From 43590515b239f24cf960470e91a12cb7f759cb2a Mon Sep 17 00:00:00 2001
From: Juan RP <xtraeme@gmail.com>
Date: Wed, 27 Feb 2013 23:02:53 +0100
Subject: [PATCH] rpi-firmware: update to a newer commit; added rpi specific
 config files.

---
 srcpkgs/rpi-firmware/files/cmdline.txt |  2 +
 srcpkgs/rpi-firmware/files/config.txt  | 80 ++++++++++++++++++++++++++
 srcpkgs/rpi-firmware/template          | 12 +++-
 3 files changed, 91 insertions(+), 3 deletions(-)
 create mode 100755 srcpkgs/rpi-firmware/files/cmdline.txt
 create mode 100755 srcpkgs/rpi-firmware/files/config.txt

diff --git a/srcpkgs/rpi-firmware/files/cmdline.txt b/srcpkgs/rpi-firmware/files/cmdline.txt
new file mode 100755
index 0000000000..7985b08065
--- /dev/null
+++ b/srcpkgs/rpi-firmware/files/cmdline.txt
@@ -0,0 +1,2 @@
+	smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 console=ttyAMA0,115200
+kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 loglevel=4 elevator=noop rootwait
diff --git a/srcpkgs/rpi-firmware/files/config.txt b/srcpkgs/rpi-firmware/files/config.txt
new file mode 100755
index 0000000000..07481cd925
--- /dev/null
+++ b/srcpkgs/rpi-firmware/files/config.txt
@@ -0,0 +1,80 @@
+# uncomment if you get no picture on HDMI for a default "safe" mode
+#hdmi_safe=1
+
+# uncomment this if your display has a black border of unused pixels visible
+# and your display can output without overscan
+#disable_overscan=1
+
+# uncomment the following to adjust overscan. Use positive numbers if console
+# goes off screen, and negative if there is too much border
+#overscan_left=16
+#overscan_right=16
+#overscan_top=16
+#overscan_bottom=16
+
+# uncomment to force a console size. By default it will be display's size minus
+# overscan.
+#framebuffer_width=1280
+#framebuffer_height=720
+
+# uncomment if hdmi display is not detected and composite is being output
+#hdmi_force_hotplug=1
+
+# uncomment to force a specific HDMI mode (this will force VGA)
+#hdmi_group=1
+#hdmi_mode=1
+
+# uncomment to force a HDMI mode rather than DVI. This can make audio work in
+# DMT (computer monitor) modes
+#hdmi_drive=2
+
+# uncomment to increase signal to HDMI, if you have interference, blanking, or
+# no display
+#config_hdmi_boost=4
+
+# uncomment for composite PAL
+#sdtv_mode=2
+
+#uncomment to overclock the arm. 700 MHz is the default.
+#arm_freq=800
+
+# for more options see http://elinux.org/RPi_config.txt
+
+## Some over clocking settings, govenor already set to ondemand
+
+##None
+#arm_freq=700
+#core_freq=250
+#sdram_freq=400
+#over_voltage=0
+
+##Modest
+#arm_freq=800
+#core_freq=300
+#sdram_freq=400
+#over_voltage=0
+
+##Medium
+#arm_freq=900
+#core_freq=333
+#sdram_freq=450
+#over_voltage=2
+
+##High
+#arm_freq=950
+#core_freq=450
+#sdram_freq=450
+#over_voltage=6
+
+##Turbo
+#arm_freq=1000
+#core_freq=500
+#sdram_freq=500
+#over_voltage=6
+
+gpu_mem_512=64
+gpu_mem_256=128
+cma_lwm=16
+cma_hwm=32
+cma_offline_start=16
+
diff --git a/srcpkgs/rpi-firmware/template b/srcpkgs/rpi-firmware/template
index 335ed6096d..e33a426651 100644
--- a/srcpkgs/rpi-firmware/template
+++ b/srcpkgs/rpi-firmware/template
@@ -1,6 +1,6 @@
 # Template file for 'rpi-firmware'
 pkgname=rpi-firmware
-version=20130219
+version=20130227
 revision=1
 short_desc="Firmware files for the Raspberry Pi"
 maintainer="Juan RP <xtraeme@gmail.com>"
@@ -11,14 +11,16 @@ noarch=yes
 nofetch=yes
 noextract=yes
 
+conf_files="/boot/cmdline.txt /boot/config.txt"
+
 do_fetch() {
 	local url="git://github.com/raspberrypi/firmware.git"
 
 	git clone --depth 1 $url ${pkgname}-${version}
 
-	# Latest commit from 20130219
+	# Latest commit from 20130226
 	cd ${pkgname}-${version}
-	git checkout 4697c2b07a19f85f297abaf876d6edd1b1085bee
+	git checkout fea69f6e9e7c59fb292a026ff6aead6b17f21738
 }
 
 do_install() {
@@ -37,4 +39,8 @@ do_install() {
 	vmove boot/COPYING.linux usr/share/licenses/${pkgname}
 	vmove boot/LICENCE.broadcom usr/share/licenses/${pkgname}
 	vmove opt/vc/LICENCE usr/share/licenses/${pkgname}
+
+	# Install configuration files.
+	vinstall ${FILESDIR}/cmdline.txt 644 boot
+	vinstall ${FILESDIR}/config.txt 644 boot
 }