diff --git a/srcpkgs/busybox-ntpd b/srcpkgs/busybox-ntpd
deleted file mode 120000
index c3fa810285..0000000000
--- a/srcpkgs/busybox-ntpd
+++ /dev/null
@@ -1 +0,0 @@
-busybox
\ No newline at end of file
diff --git a/srcpkgs/busybox-ntpd/files b/srcpkgs/busybox-ntpd/files
new file mode 120000
index 0000000000..bd963d91c4
--- /dev/null
+++ b/srcpkgs/busybox-ntpd/files
@@ -0,0 +1 @@
+../busybox/files/
\ No newline at end of file
diff --git a/srcpkgs/busybox-ntpd/patches b/srcpkgs/busybox-ntpd/patches
new file mode 120000
index 0000000000..02b71e5738
--- /dev/null
+++ b/srcpkgs/busybox-ntpd/patches
@@ -0,0 +1 @@
+../busybox/patches/
\ No newline at end of file
diff --git a/srcpkgs/busybox-ntpd/template b/srcpkgs/busybox-ntpd/template
new file mode 100644
index 0000000000..b9179677de
--- /dev/null
+++ b/srcpkgs/busybox-ntpd/template
@@ -0,0 +1,43 @@
+# Build template for 'busybox-ntpd'.
+pkgname=busybox-ntpd
+version=1.23.2
+revision=1
+wrksrc="busybox-$version"
+hostmakedepends="perl"
+short_desc="The Swiss Army Knife of Embedded Linux (ntpd)"
+maintainer="Juan RP <xtraeme@voidlinux.eu>"
+license="GPL-2"
+homepage="http://www.busybox.net"
+distfiles="${homepage}/downloads/busybox-$version.tar.bz2"
+checksum=05a6f9e21aad8c098e388ae77de7b2361941afa7157ef74216703395b14e319a
+
+pre_build() {
+	mkdir -p src
+	mv * src || true
+
+	local t="busybox-ntpd"
+	mkdir -p $t
+	make -C $t CFLAGS="$CFLAGS" KBUILD_SRC=${wrksrc}/src \
+		-f ${wrksrc}/src/Makefile defconfig
+	cp -f ${FILESDIR}/${t}.dotconfig ${t}/.config
+
+	case "$XBPS_TARGET_MACHINE" in
+	*-musl) sed -i -e /CONFIG_FEATURE_VI_REGEX_SEARCH/s/y/n/ \
+			-e /CONFIG_FEATURE_MOUNT_NFS/s/y/n/ \
+			${t}/.config;;
+	esac
+
+	if [ "$CROSS_BUILD" ]; then
+		sed -e \
+			"s,\(CONFIG_CROSS_COMPILER_PREFIX\).*,\1=\"${XBPS_CROSS_TRIPLET}-\",g" \
+			-i ${t}/.config
+	fi
+}
+do_build() {
+	local t="busybox-ntpd"
+	make -C $t SKIP_STRIP=y CFLAGS="$CFLAGS" ${makejobs}
+}
+do_install() {
+	vbin busybox-ntpd/busybox_unstripped busybox-ntpd
+	vsv busybox-ntpd
+}
diff --git a/srcpkgs/busybox-ntpd/update b/srcpkgs/busybox-ntpd/update
new file mode 100644
index 0000000000..791aa2a97d
--- /dev/null
+++ b/srcpkgs/busybox-ntpd/update
@@ -0,0 +1 @@
+ignore="*.0"
diff --git a/srcpkgs/busybox/template b/srcpkgs/busybox/template
index ede6a53309..f639cb3598 100644
--- a/srcpkgs/busybox/template
+++ b/srcpkgs/busybox/template
@@ -1,7 +1,7 @@
 # Build template for 'busybox'.
 pkgname=busybox
 version=1.23.2
-revision=1
+revision=2
 hostmakedepends="perl"
 short_desc="The Swiss Army Knife of Embedded Linux"
 maintainer="Juan RP <xtraeme@voidlinux.eu>"
@@ -24,12 +24,12 @@ pre_build() {
 	mv * src || true
 
 	local t
-	for t in busybox busybox-static busybox-ntpd; do
+	for t in busybox busybox-static; do
 		mkdir -p $t
 		make -C $t CFLAGS="$(_cflags $t)" KBUILD_SRC=${wrksrc}/src \
 			-f ${wrksrc}/src/Makefile defconfig
 		cp -f ${FILESDIR}/${t}.dotconfig ${t}/.config
-			
+
 		case "$XBPS_TARGET_MACHINE" in
 		*-musl) sed -i -e /CONFIG_FEATURE_VI_REGEX_SEARCH/s/y/n/ \
 				-e /CONFIG_FEATURE_MOUNT_NFS/s/y/n/ \
@@ -45,7 +45,7 @@ pre_build() {
 }
 do_build() {
 	local t
-	for t in busybox busybox-static busybox-ntpd; do
+	for t in busybox busybox-static; do
 		make -C $t SKIP_STRIP=y CFLAGS="$(_cflags $t)" ${makejobs}
 	done
 }
@@ -60,11 +60,3 @@ busybox-static_package() {
 		vbin busybox-static/busybox busybox.static
 	}
 }
-
-busybox-ntpd_package() {
-	short_desc+=" (ntpd)"
-	pkg_install() {
-		vbin busybox-ntpd/busybox_unstripped busybox-ntpd
-		vsv busybox-ntpd
-	}
-}
diff --git a/srcpkgs/mkinitcpio-encrypt b/srcpkgs/mkinitcpio-encrypt
new file mode 120000
index 0000000000..dd6b17ac57
--- /dev/null
+++ b/srcpkgs/mkinitcpio-encrypt
@@ -0,0 +1 @@
+mkinitcpio
\ No newline at end of file
diff --git a/srcpkgs/mkinitcpio-encryptssh/template b/srcpkgs/mkinitcpio-encryptssh/template
new file mode 100644
index 0000000000..8ca16fa6e6
--- /dev/null
+++ b/srcpkgs/mkinitcpio-encryptssh/template
@@ -0,0 +1,21 @@
+# Template file for 'mkinitcpio-encryptssh'
+pkgname=mkinitcpio-encryptssh
+version=0.16
+revision=1
+_realname=dropbear_initrd_encrypt
+wrksrc="$_realname-$version-$revision"
+noarch=yes
+depends="mkinitcpio cryptsetup dropbear mkinitcpio-nfs-utils psmisc iproute2"
+short_desc="Allows for an encrypted root device to be unlocked remotely over SSH"
+maintainer="Andrea Brancaleoni <miwaxe@gmail.com>"
+license="GPL-3"
+homepage="https://github.com/grazzolini/dropbear_initrd_encrypt"
+distfiles="$homepage/archive/v$version-$revision.tar.gz"
+checksum=6b24ea3d6e1ee55d304ca31707fe17c545f7ea843a13b764e22475f838c41eae
+
+do_install() {
+	vinstall dropbear_hook 644 usr/lib/initcpio/hooks dropbear
+	vinstall dropbear_install 644 usr/lib/initcpio/install dropbear
+	vinstall encryptssh_hook 644 usr/lib/initcpio/hooks encryptssh
+	vinstall encryptssh_install 644 usr/lib/initcpio/install encryptssh
+}
diff --git a/srcpkgs/mkinitcpio-lvm2 b/srcpkgs/mkinitcpio-lvm2
new file mode 120000
index 0000000000..dd6b17ac57
--- /dev/null
+++ b/srcpkgs/mkinitcpio-lvm2
@@ -0,0 +1 @@
+mkinitcpio
\ No newline at end of file
diff --git a/srcpkgs/mkinitcpio-mdadm b/srcpkgs/mkinitcpio-mdadm
new file mode 120000
index 0000000000..dd6b17ac57
--- /dev/null
+++ b/srcpkgs/mkinitcpio-mdadm
@@ -0,0 +1 @@
+mkinitcpio
\ No newline at end of file
diff --git a/srcpkgs/mkinitcpio-nfs-utils/files/initcpio-hook-net b/srcpkgs/mkinitcpio-nfs-utils/files/initcpio-hook-net
new file mode 100644
index 0000000000..4d1ebb9560
--- /dev/null
+++ b/srcpkgs/mkinitcpio-nfs-utils/files/initcpio-hook-net
@@ -0,0 +1,90 @@
+# vim: set ft=sh:
+run_hook() {
+    local line i net_mac bootif_mac bootif_dev defaultrootpath defaultserver
+    # These variables will be parsed from /tmp/net-*.conf generated by ipconfig
+    local DEVICE
+    local IPV4ADDR IPV4BROADCAST IPV4NETMASK IPV4GATEWAY IPV4DNS0 IPV4DNS1
+    local HOSTNAME DNSDOMAIN NISDOMAIN ROOTSERVER ROOTPATH
+    local filename
+    # /tmp/net-*.conf
+
+    if [ -z "${ip}" -a -n "${nfsaddrs}" ]; then
+        ip="${nfsaddrs}"
+    fi
+
+    if [ -n "${ip}" ]; then
+        if [ -n "${BOOTIF}" ]; then
+            bootif_mac=${BOOTIF#01-}
+            bootif_mac=${bootif_mac//-/:}
+            for i in /sys/class/net/*/address; do
+                read net_mac < ${i}
+                if [ "${bootif_mac}" == "${net_mac}" ]; then
+                    bootif_dev=${i#/sys/class/net/}
+                    bootif_dev=${bootif_dev%/address}
+                    break
+                fi
+            done
+            ip="${ip}::${bootif_dev}"
+        fi
+
+        # setup network and save some values
+        ipconfig "ip=${ip}"
+
+        for conf in /tmp/net-*.conf; do
+            [ -f "$conf" ] && . "$conf"
+        done
+
+        # calculate nfs_server, nfs_path and nfs_option for later nfs mount
+        if [ "${root}" = "/dev/nfs" -o "${nfsroot}" != "" ]; then
+            # parse ROOTPATH if defined by dhcp server
+            if [ -n "${ROOTPATH}" ]; then
+                line="${ROOTPATH}"
+                nfs_server="${line%%:*}"
+                [ "${nfs_server}" = "${line}" ] && nfs_server="${ROOTSERVER}"
+                defaultserver="${nfs_server}"
+                line="${line#*:}"
+                nfs_path="${line}"
+                defaultrootpath="${nfs_path}"
+            else
+                # define a default ROOTPATH
+                if [ "${ROOTPATH}" = "" ]; then
+                    defaultrootpath="/tftpboot/${IPV4ADDR}"
+                fi
+            fi
+
+            # parse nfsroot if present (overrides ROOTPATH)
+            if [ -n "${nfsroot}" ]; then
+                line="${nfsroot}"
+                nfs_server="${line%%:*}"
+                [ -z "${nfs_server}" ] && nfs_server="${defaultserver}"
+                line="${line#*:}"
+                nfs_path="${line%%,*}"
+                line="${line#"${nfs_path}"}"
+                [ -z "${nfs_path}" ] && nfs_path="${defaultrootpath}"
+                nfs_option="${line#","}"
+            fi
+
+            # ensure root and filesystem type are set proper for nfs boot
+            root="/dev/nfs"
+            rootfstype="nfs"
+
+            echo "NFS-Mount: ${nfs_server}:${nfs_path}"
+
+            # set mount handler for NFS
+            mount_handler="nfs_mount_handler"
+        fi
+    fi
+}
+
+nfs_mount_handler() {
+    if [ -z "$nfs_server" -o -z "$nfs_path" ]; then
+        err "Unable to mount root filesystem over NFS: wrong parameters."
+        echo "You are being dropped to a recovery shell"
+        echo "    Type 'exit' to try and continue booting"
+        launch_interactive_shell
+        msg "Trying to continue (this will most likely fail) ..."
+    fi
+    nfsmount ${nfs_option:+-o ${nfs_option}} "${nfs_server}:${nfs_path}" "$1"
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
diff --git a/srcpkgs/mkinitcpio-nfs-utils/files/initcpio-install-net b/srcpkgs/mkinitcpio-nfs-utils/files/initcpio-install-net
new file mode 100644
index 0000000000..79b678949c
--- /dev/null
+++ b/srcpkgs/mkinitcpio-nfs-utils/files/initcpio-install-net
@@ -0,0 +1,108 @@
+#!/bin/bash
+
+build() {
+    add_checked_modules '/drivers/net/'
+    add_module nfsv3?
+
+    add_binary "/usr/lib/initcpio/ipconfig" "/bin/ipconfig"
+    add_binary "/usr/lib/initcpio/nfsmount" "/bin/nfsmount"
+
+    add_runscript
+}
+
+help() {
+    cat <<HELPEOF
+This hook loads the necessary modules for a network device.
+Detection will take place at runtime. To minimize the modules
+in the image, add the autodetect hook too.
+For pcmcia net devices please use pcmcia hook too.
+
+Kernel Parameters:
+An interface spec can be either short form, which is just the name of
+an interface (eth0 or whatever), or long form.  The long form consists
+of up to seven elements, separated by colons:
+
+ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
+nfsaddrs= is an alias to ip= and can be used too.
+
+<client-ip>   IP address of the client. If empty, the address will
+              either be determined by RARP/BOOTP/DHCP. What protocol
+              is used de- pends on the <autoconf> parameter. If this
+              parameter is not empty, autoconf will be used.
+
+<server-ip>   IP address of the NFS server. If RARP is used to
+              determine the client address and this parameter is NOT
+              empty only replies from the specified server are
+              accepted. To use different RARP and NFS server,
+              specify your RARP server here (or leave it blank), and
+              specify your NFS server in the 'nfsroot' parameter
+              (see above). If this entry is blank the address of the
+              server is used which answered the RARP/BOOTP/DHCP
+              request.
+
+<gw-ip>       IP address of a gateway if the server is on a different
+              subnet. If this entry is empty no gateway is used and the
+              server is assumed to be on the local network, unless a
+              value has been received by BOOTP/DHCP.
+
+<netmask>     Netmask for local network interface. If this is empty,
+              the netmask is derived from the client IP address assuming
+              classful addressing, unless overridden in BOOTP/DHCP reply.
+
+<hostname>    Name of the client. If empty, the client IP address is
+              used in ASCII notation, or the value received by
+              BOOTP/DHCP.
+
+<device>      Name of network device to use. If this is empty, all
+              devices are used for RARP/BOOTP/DHCP requests, and the
+              first one we receive a reply on is configured. If you
+              have only one device, you can safely leave this blank.
+
+<autoconf>    Method to use for autoconfiguration. If this is either
+              'rarp', 'bootp', or 'dhcp' the specified protocol is
+              used.  If the value is 'both', 'all' or empty, all
+              protocols are used.  'off', 'static' or 'none' means
+              no autoconfiguration.
+Examples:
+ip=127.0.0.1:::::lo:none  --> Enable the loopback interface.
+ip=192.168.1.1:::::eth2:none --> Enable static eth2 interface.
+ip=:::::eth0:dhcp --> Enable dhcp protcol for eth0 configuration.
+
+nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>]
+
+If the 'nfsroot' parameter is NOT given on the command line, the default
+"/tftpboot/%s" will be used.
+
+<server-ip>   Specifies the IP address of the NFS server. If this field
+              is not given, the default address as determined by the
+              'ip' variable (see below) is used. One use of this
+              parameter is for example to allow using different servers
+              for RARP and NFS. Usually you can leave this blank.
+
+<root-dir>    Name of the directory on the server to mount as root. If
+              there is a "%s" token in the string, the token will be
+              replaced by the ASCII-representation of the client's IP
+              address.
+
+<nfs-options> Standard NFS options. All options are separated by commas.
+              If the options field is not given, the following defaults
+              will be used:
+                      port            = as given by server portmap daemon
+                      rsize           = 1024
+                      wsize           = 1024
+                      timeo           = 7
+                      retrans         = 3
+                      acregmin        = 3
+                      acregmax        = 60
+                      acdirmin        = 30
+                      acdirmax        = 60
+                      flags           = hard, nointr, noposix, cto, ac
+
+root=/dev/nfs
+
+If you don't use nfsroot= parameter you need to set root=/dev/nfs
+to boot from a nfs root by autoconfiguration.
+HELPEOF
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
diff --git a/srcpkgs/mkinitcpio-nfs-utils/patches/musl.patch b/srcpkgs/mkinitcpio-nfs-utils/patches/musl.patch
new file mode 100644
index 0000000000..fa822cb052
--- /dev/null
+++ b/srcpkgs/mkinitcpio-nfs-utils/patches/musl.patch
@@ -0,0 +1,83 @@
+From 9e6dd28c7b2d9649cc3fc3ea9effadcb29d233c5 Mon Sep 17 00:00:00 2001
+From: Andrea Brancaleoni <miwaxe@gmail.com>
+Date: Thu, 25 Jun 2015 18:01:23 +0200
+Subject: [PATCH] musl
+
+---
+ ipconfig/packet.c | 27 +++++++++++++--------------
+ 1 file changed, 13 insertions(+), 14 deletions(-)
+
+diff --git a/ipconfig/packet.c b/ipconfig/packet.c
+index 446073a..afedf9d 100644
+--- a/ipconfig/packet.c
++++ b/ipconfig/packet.c
+@@ -7,10 +7,9 @@
+ #include <stdlib.h>
+ #include <string.h>
+ #include <unistd.h>
+-#include <net/if_packet.h>
++#include <linux/if_packet.h>
+ #include <netinet/if_ether.h>
+ #include <netinet/in.h>
+-#include <netpacket/packet.h>
+ #include <asm/byteorder.h>
+ #include <arpa/inet.h>
+ #include <netinet/ip.h>
+@@ -92,10 +91,10 @@ static struct header ipudp_hdrs = {
+ 	       .daddr		= INADDR_BROADCAST,
+ 	       },
+ 	.udp = {
+-		.source		= __constant_htons(LOCAL_PORT),
+-		.dest		= __constant_htons(REMOTE_PORT),
+-		.len		= 0,
+-		.check		= 0,
++		.uh_sport		= __constant_htons(LOCAL_PORT),
++		.uh_dport		= __constant_htons(REMOTE_PORT),
++		.uh_ulen		= 0,
++		.uh_sum		= 0,
+ 		},
+ };
+
+@@ -127,8 +126,8 @@ int packet_send(struct netdev *dev, struct iovec *iov, int iov_len)
+ 	msg.msg_flags = 0;
+
+ 	if (cfg_local_port != LOCAL_PORT) {
+-		ipudp_hdrs.udp.source = htons(cfg_local_port);
+-		ipudp_hdrs.udp.dest = htons(cfg_remote_port);
++		ipudp_hdrs.udp.uh_sport = htons(cfg_local_port);
++		ipudp_hdrs.udp.uh_dport = htons(cfg_remote_port);
+ 	}
+
+ 	dprintf("\n   udp src %d dst %d", ntohs(ipudp_hdrs.udp.source),
+@@ -159,7 +158,7 @@ int packet_send(struct netdev *dev, struct iovec *iov, int iov_len)
+ 	ipudp_hdrs.ip.check   = ip_checksum((uint16_t *) &ipudp_hdrs.ip,
+ 					    ipudp_hdrs.ip.ihl);
+
+-	ipudp_hdrs.udp.len    = htons(len - sizeof(struct iphdr));
++	ipudp_hdrs.udp.uh_ulen    = htons(len - sizeof(struct iphdr));
+
+ 	dprintf("\n   bytes %d\n", len);
+
+@@ -243,14 +242,14 @@ int packet_recv(struct netdev *dev, struct iovec *iov, int iov_len)
+
+ 	ret -= 4 * ip->ihl;
+
+-	dprintf("\n   udp src %d dst %d ", ntohs(udp->source),
+-		ntohs(udp->dest));
++	dprintf("\n   udp src %d dst %d ", ntohs(udp->uh_sport),
++		ntohs(udp->uh_dport));
+
+-	if (udp->source != htons(cfg_remote_port) ||
+-	    udp->dest != htons(cfg_local_port))
++	if (udp->uh_sport != htons(cfg_remote_port) ||
++	    udp->uh_dport != htons(cfg_local_port))
+ 		goto free_pkt;
+
+-	if (ntohs(udp->len) > ret)
++	if (ntohs(udp->uh_ulen) > ret)
+ 		goto free_pkt;
+
+ 	ret -= sizeof(struct udphdr);
+--
+2.4.4
+
diff --git a/srcpkgs/mkinitcpio-nfs-utils/patches/nfsmount-fix-wrong-umount-path.patch b/srcpkgs/mkinitcpio-nfs-utils/patches/nfsmount-fix-wrong-umount-path.patch
new file mode 100644
index 0000000000..0f62fea823
--- /dev/null
+++ b/srcpkgs/mkinitcpio-nfs-utils/patches/nfsmount-fix-wrong-umount-path.patch
@@ -0,0 +1,14 @@
+--- a/nfsmount/mount.c	2012-11-10 20:16:31.894540497 -0500
++++ b/nfsmount/mount.c	2012-11-10 20:16:39.957369011 -0500
+@@ -358,9 +358,9 @@
+       bail:
+ 	if (mounted) {
+ 		if (data->flags & NFS_MOUNT_VER3) {
+-			umount_v3(path, clnt);
++			umount_v3(rem_path, clnt);
+ 		} else {
+-			umount_v2(path, clnt);
++			umount_v2(rem_path, clnt);
+ 		}
+ 	}
+ 
diff --git a/srcpkgs/mkinitcpio-nfs-utils/template b/srcpkgs/mkinitcpio-nfs-utils/template
new file mode 100644
index 0000000000..68c55ff227
--- /dev/null
+++ b/srcpkgs/mkinitcpio-nfs-utils/template
@@ -0,0 +1,35 @@
+# Template file for 'mkinitcpio-nfs-utils'
+pkgname=mkinitcpio-nfs-utils
+version=0.3
+revision=1
+build_style=gnu-makefile
+short_desc="Ipconfig and nfsmount tools for NFS root support in mkinitcpio"
+maintainer="Andrea Brancaleoni <miwaxe@gmail.com>"
+license="GPL-2"
+homepage="http://www.archlinux.org/"
+depends="mkinitcpio"
+distfiles="https://sources.archlinux.org/other/mkinitcpio/$pkgname-$version.tar.xz"
+checksum=d290d489844fae100ca7b848b8eef40078124ff373203086bacc07329d1e8939
+
+case "$XBPS_TARGET_MACHINE" in
+*-musl)
+	CFLAGS="-DSYS_NMLN=65"
+	# http://osxr.org/glibc/source/sysdeps/unix/sysv/linux/bits/utsname.h?v=glibc-2.15; fixes musl not having set this variable
+	;;
+esac
+
+patch_args="-Np1"
+
+pre_configure() {
+	case "$XBPS_TARGET_MACHINE" in
+	*-musl)
+		sed -i 's|PROGRAMS = ipconfig nfsmount|PROGRAMS = ipconfig|g' Makefile
+		# No RPC in musl for now
+		;;
+	esac
+}
+
+post_install() {
+	vinstall ${FILESDIR}/initcpio-install-net 644 usr/lib/initcpio/install net
+	vinstall ${FILESDIR}/initcpio-hook-net 644 usr/lib/initcpio/hooks net
+}
diff --git a/srcpkgs/mkinitcpio-udev b/srcpkgs/mkinitcpio-udev
new file mode 120000
index 0000000000..dd6b17ac57
--- /dev/null
+++ b/srcpkgs/mkinitcpio-udev
@@ -0,0 +1 @@
+mkinitcpio
\ No newline at end of file
diff --git a/srcpkgs/mkinitcpio/files/11-dm-initramfs.rules b/srcpkgs/mkinitcpio/files/11-dm-initramfs.rules
new file mode 100644
index 0000000000..d2c1673245
--- /dev/null
+++ b/srcpkgs/mkinitcpio/files/11-dm-initramfs.rules
@@ -0,0 +1,3 @@
+# needed with new udev/mkinitcpio and as implemented in dracut:
+# <http://git.kernel.org/?p=boot/dracut/dracut.git;a=commitdiff;h=12b9736228f2b34c15a9cb63be79cf7b6e865b54>
+SUBSYSTEM=="block", KERNEL=="dm-[0-9]*", ACTION=="add|change", OPTIONS="db_persist"
diff --git a/srcpkgs/mkinitcpio/files/69-dm-lvm-metad.rules b/srcpkgs/mkinitcpio/files/69-dm-lvm-metad.rules
new file mode 100644
index 0000000000..c032108b46
--- /dev/null
+++ b/srcpkgs/mkinitcpio/files/69-dm-lvm-metad.rules
@@ -0,0 +1,93 @@
+# Copyright (C) 2012 Red Hat, Inc. All rights reserved.
+#
+# This file is part of LVM2.
+
+# Udev rules for LVM.
+#
+# Scan all block devices having a PV label for LVM metadata.
+# Store this information in LVMetaD (the LVM metadata daemon) and maintain LVM
+# metadata state for improved performance by avoiding further scans while
+# running subsequent LVM commands or while using lvm2app library.
+# Also, notify LVMetaD about any relevant block device removal.
+#
+# This rule is essential for having the information in LVMetaD up-to-date.
+# It also requires blkid to be called on block devices before so only devices
+# used as LVM PVs are processed (ID_FS_TYPE="LVM2_member" or "LVM1_member").
+
+SUBSYSTEM!="block", GOTO="lvm_end"
+
+
+ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="lvm_end"
+
+# If the PV label got lost, inform lvmetad immediately.
+# Detect the lost PV label by comparing previous ID_FS_TYPE value with current one.
+ENV{.ID_FS_TYPE_NEW}="$env{ID_FS_TYPE}"
+IMPORT{db}="ID_FS_TYPE"
+ENV{ID_FS_TYPE}=="LVM2_member|LVM1_member", ENV{.ID_FS_TYPE_NEW}!="LVM2_member|LVM1_member", ENV{LVM_PV_GONE}="1"
+ENV{ID_FS_TYPE}="$env{.ID_FS_TYPE_NEW}"
+ENV{LVM_PV_GONE}=="1", GOTO="lvm_scan"
+
+# Only process devices already marked as a PV - this requires blkid to be called before.
+ENV{ID_FS_TYPE}!="LVM2_member|LVM1_member", GOTO="lvm_end"
+ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="lvm_end"
+
+# Inform lvmetad about any PV that is gone.
+ACTION=="remove", GOTO="lvm_scan"
+
+# Create /dev/disk/by-id/lvm-pv-uuid-<PV_UUID> symlink for each PV
+ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-id/lvm-pv-uuid-$env{ID_FS_UUID_ENC}"
+
+# If the PV is a special device listed below, scan only if the device is
+# properly activated. These devices are not usable after an ADD event,
+# but they require an extra setup and they are ready after a CHANGE event.
+# Also support coldplugging with ADD event but only if the device is already
+# properly activated.
+# This logic should be eventually moved to rules where those particular
+# devices are processed primarily (MD and loop).
+
+# DM device:
+KERNEL!="dm-[0-9]*", GOTO="next"
+ENV{DM_UDEV_PRIMARY_SOURCE_FLAG}=="1", ENV{DM_ACTIVATION}=="1", GOTO="lvm_scan"
+GOTO="lvm_end"
+
+# MD device:
+LABEL="next"
+KERNEL!="md[0-9]*", GOTO="next"
+IMPORT{db}="LVM_MD_PV_ACTIVATED"
+ACTION=="add", ENV{LVM_MD_PV_ACTIVATED}=="1", GOTO="lvm_scan"
+ACTION=="change", ENV{LVM_MD_PV_ACTIVATED}!="1", TEST=="md/array_state", ENV{LVM_MD_PV_ACTIVATED}="1", GOTO="lvm_scan"
+ACTION=="add", KERNEL=="md[0-9]*p[0-9]*", GOTO="lvm_scan"
+ENV{LVM_MD_PV_ACTIVATED}!="1", ENV{SYSTEMD_READY}="0"
+GOTO="lvm_end"
+
+# Loop device:
+LABEL="next"
+KERNEL!="loop[0-9]*", GOTO="next"
+ACTION=="add", ENV{LVM_LOOP_PV_ACTIVATED}=="1", GOTO="lvm_scan"
+ACTION=="change", ENV{LVM_LOOP_PV_ACTIVATED}!="1", TEST=="loop/backing_file", ENV{LVM_LOOP_PV_ACTIVATED}="1", GOTO="lvm_scan"
+ENV{LVM_LOOP_PV_ACTIVATED}!="1", ENV{SYSTEMD_READY}="0"
+GOTO="lvm_end"
+
+# If the PV is not a special device listed above, scan only after device addition (ADD event)
+LABEL="next"
+ACTION!="add", GOTO="lvm_end"
+
+LABEL="lvm_scan"
+
+# The table below summarises the situations in which we reach the LABEL="lvm_scan".
+# Marked by X, X* means only if the special dev is properly set up.
+# The artificial ADD is supported for coldplugging. We avoid running the pvscan
+# on artificial CHANGE so there's no unexpected autoactivation when WATCH rule fires.
+# N.B. MD and loop never actually  reaches lvm_scan on REMOVE as the PV label is gone
+# within a CHANGE event (these are caught by the "LVM_PV_GONE" rule at the beginning).
+#
+#        | real ADD | real CHANGE | artificial ADD | artificial CHANGE | REMOVE
+# =============================================================================
+#  DM    |          |      X      |       X*       |                   |   X
+#  MD    |          |      X      |       X*       |                   |
+#  loop  |          |      X      |       X*       |                   |
+#  other |    X     |             |       X        |                   |   X
+ENV{SYSTEMD_READY}="1"
+RUN+="/usr/bin/lvm pvscan --background --cache --activate ay --major $major --minor $minor", ENV{LVM_SCANNED}="1"
+
+LABEL="lvm_end"
diff --git a/srcpkgs/mkinitcpio/files/encrypt_hook b/srcpkgs/mkinitcpio/files/encrypt_hook
new file mode 100644
index 0000000000..819c4cf60f
--- /dev/null
+++ b/srcpkgs/mkinitcpio/files/encrypt_hook
@@ -0,0 +1,139 @@
+#!/usr/bin/ash
+
+run_hook() {
+    modprobe -a -q dm-crypt >/dev/null 2>&1
+    [ "${quiet}" = "y" ] && CSQUIET=">/dev/null"
+
+    # Get keyfile if specified
+    ckeyfile="/crypto_keyfile.bin"
+    if [ -n "$cryptkey" ]; then
+        IFS=: read ckdev ckarg1 ckarg2 <<EOF
+$cryptkey
+EOF
+
+        if [ "$ckdev" = "rootfs" ]; then
+            ckeyfile=$ckarg1
+        elif resolved=$(resolve_device "${ckdev}" ${rootdelay}); then
+            case ${ckarg1} in
+                *[!0-9]*)
+                    # Use a file on the device
+                    # ckarg1 is not numeric: ckarg1=filesystem, ckarg2=path
+                    mkdir /ckey
+                    mount -r -t "$ckarg1" "$resolved" /ckey
+                    dd if="/ckey/$ckarg2" of="$ckeyfile" >/dev/null 2>&1
+                    umount /ckey
+                    ;;
+                *)
+                    # Read raw data from the block device
+                    # ckarg1 is numeric: ckarg1=offset, ckarg2=length
+                    dd if="$resolved" of="$ckeyfile" bs=1 skip="$ckarg1" count="$ckarg2" >/dev/null 2>&1
+                    ;;
+            esac
+        fi
+        [ ! -f ${ckeyfile} ] && echo "Keyfile could not be opened. Reverting to passphrase."
+    fi
+
+    if [ -n "${cryptdevice}" ]; then
+        DEPRECATED_CRYPT=0
+        IFS=: read cryptdev cryptname cryptoptions <<EOF
+$cryptdevice
+EOF
+    else
+        DEPRECATED_CRYPT=1
+        cryptdev="${root}"
+        cryptname="root"
+    fi
+
+    warn_deprecated() {
+        echo "The syntax 'root=${root}' where '${root}' is an encrypted volume is deprecated"
+        echo "Use 'cryptdevice=${root}:root root=/dev/mapper/root' instead."
+    }
+
+    for cryptopt in ${cryptoptions//,/ }; do
+        case ${cryptopt} in
+            allow-discards)
+                cryptargs="${cryptargs} --allow-discards"
+                ;;
+            *)
+                echo "Encryption option '${cryptopt}' not known, ignoring." >&2
+                ;;
+        esac
+    done
+
+    if resolved=$(resolve_device "${cryptdev}" ${rootdelay}); then
+        if cryptsetup isLuks ${resolved} >/dev/null 2>&1; then
+            [ ${DEPRECATED_CRYPT} -eq 1 ] && warn_deprecated
+            dopassphrase=1
+            # If keyfile exists, try to use that
+            if [ -f ${ckeyfile} ]; then
+                if eval cryptsetup --key-file ${ckeyfile} open --type luks ${resolved} ${cryptname} ${cryptargs} ${CSQUIET}; then
+                    dopassphrase=0
+                else
+                    echo "Invalid keyfile. Reverting to passphrase."
+                fi
+            fi
+            # Ask for a passphrase
+            if [ ${dopassphrase} -gt 0 ]; then
+                echo ""
+                echo "A password is required to access the ${cryptname} volume:"
+
+                #loop until we get a real password
+                while ! eval cryptsetup open --type luks ${resolved} ${cryptname} ${cryptargs} ${CSQUIET}; do
+                    sleep 2;
+                done
+            fi
+            if [ -e "/dev/mapper/${cryptname}" ]; then
+                if [ ${DEPRECATED_CRYPT} -eq 1 ]; then
+                    export root="/dev/mapper/root"
+                fi
+            else
+                err "Password succeeded, but ${cryptname} creation failed, aborting..."
+                exit 1
+            fi
+        elif [ -n "${crypto}" ]; then
+            [ ${DEPRECATED_CRYPT} -eq 1 ] && warn_deprecated
+            msg "Non-LUKS encrypted device found..."
+            if echo "$crypto" | awk -F: '{ exit(NF == 5) }'; then
+                err "Verify parameter format: crypto=hash:cipher:keysize:offset:skip"
+                err "Non-LUKS decryption not attempted..."
+                return 1
+            fi
+            exe="cryptsetup open --type plain $resolved $cryptname $cryptargs"
+            IFS=: read c_hash c_cipher c_keysize c_offset c_skip <<EOF
+$crypto
+EOF
+            [ -n "$c_hash" ]    && exe="$exe --hash '$c_hash'"
+            [ -n "$c_cipher" ]  && exe="$exe --cipher '$c_cipher'"
+            [ -n "$c_keysize" ] && exe="$exe --key-size '$c_keysize'"
+            [ -n "$c_offset" ]  && exe="$exe --offset '$c_offset'"
+            [ -n "$c_skip" ]    && exe="$exe --skip '$c_skip'"
+            if [ -f "$ckeyfile" ]; then
+                exe="$exe --key-file $ckeyfile"
+            else
+                exe="$exe --verify-passphrase"
+                echo ""
+                echo "A password is required to access the ${cryptname} volume:"
+            fi
+            eval "$exe $CSQUIET"
+
+            if [ $? -ne 0 ]; then
+                err "Non-LUKS device decryption failed. verify format: "
+                err "      crypto=hash:cipher:keysize:offset:skip"
+                exit 1
+            fi
+            if [ -e "/dev/mapper/${cryptname}" ]; then
+                if [ ${DEPRECATED_CRYPT} -eq 1 ]; then
+                    export root="/dev/mapper/root"
+                fi
+            else
+                err "Password succeeded, but ${cryptname} creation failed, aborting..."
+                exit 1
+            fi
+        else
+            err "Failed to open encryption mapping: The device ${cryptdev} is not a LUKS volume and the crypto= paramater was not specified."
+        fi
+    fi
+    rm -f ${ckeyfile}
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
diff --git a/srcpkgs/mkinitcpio/files/encrypt_install b/srcpkgs/mkinitcpio/files/encrypt_install
new file mode 100644
index 0000000000..38e5ddc57b
--- /dev/null
+++ b/srcpkgs/mkinitcpio/files/encrypt_install
@@ -0,0 +1,44 @@
+#!/bin/bash
+
+build() {
+    local mod
+
+    add_module dm-crypt
+    if [[ $CRYPTO_MODULES ]]; then
+        for mod in $CRYPTO_MODULES; do
+            add_module "$mod"
+        done
+    else
+        add_all_modules '/crypto/'
+    fi
+
+    add_binary "cryptsetup"
+    add_binary "dmsetup"
+    add_file "/usr/lib/udev/rules.d/10-dm.rules"
+    add_file "/usr/lib/udev/rules.d/13-dm-disk.rules"
+    add_file "/usr/lib/udev/rules.d/95-dm-notify.rules"
+    add_file "/usr/lib/initcpio/udev/11-dm-initramfs.rules" "/usr/lib/udev/rules.d/11-dm-initramfs.rules"
+
+    add_runscript
+}
+
+help() {
+    cat <<HELPEOF
+This hook allows for an encrypted root device. Users should specify the device
+to be unlocked using 'cryptdevice=device:dmname' on the kernel command line,
+where 'device' is the path to the raw device, and 'dmname' is the name given to
+the device after unlocking, and will be available as /dev/mapper/dmname.
+
+For unlocking via keyfile, 'cryptkey=device:fstype:path' should be specified on
+the kernel cmdline, where 'device' represents the raw block device where the key
+exists, 'fstype' is the filesystem type of 'device' (or auto), and 'path' is
+the absolute path of the keyfile within the device.
+
+Without specifying a keyfile, you will be prompted for the password at runtime.
+This means you must have a keyboard available to input it, and you may need
+the keymap hook as well to ensure that the keyboard is using the layout you
+expect.
+HELPEOF
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
diff --git a/srcpkgs/mkinitcpio/files/kernel-hook-postinst b/srcpkgs/mkinitcpio/files/kernel-hook-postinst
new file mode 100644
index 0000000000..31fe570581
--- /dev/null
+++ b/srcpkgs/mkinitcpio/files/kernel-hook-postinst
@@ -0,0 +1,15 @@
+#!/bin/sh
+#
+# Kernel post-install hook for mkinitcpio.
+#
+# Arguments passed to this script: $1 pkgname, $2 version.
+#
+PKGNAME="$1"
+VERSION="$2"
+
+if [ ! -x bin/mkinitcpio ]; then
+	exit 0
+fi
+
+mkinitcpio -g boot/initramfs-${VERSION}.img -k ${VERSION}
+exit $?
diff --git a/srcpkgs/mkinitcpio/files/kernel-hook-postrm b/srcpkgs/mkinitcpio/files/kernel-hook-postrm
new file mode 100644
index 0000000000..f099aba66c
--- /dev/null
+++ b/srcpkgs/mkinitcpio/files/kernel-hook-postrm
@@ -0,0 +1,13 @@
+#!/bin/sh
+#
+# Kernel post-remove hook for mkinitcpio.
+#
+# Arguments passed to this script: $1 pkgname, $2 version.
+#
+PKGNAME="$1"
+VERSION="$2"
+
+if [ -f /boot/initramfs-${VERSION}.img ]; then
+	rm -f /boot/initramfs-${VERSION}.img
+fi
+exit $?
diff --git a/srcpkgs/mkinitcpio/files/lvm.conf b/srcpkgs/mkinitcpio/files/lvm.conf
new file mode 100644
index 0000000000..e124eced38
--- /dev/null
+++ b/srcpkgs/mkinitcpio/files/lvm.conf
@@ -0,0 +1,1587 @@
+# This is an example configuration file for the LVM2 system.
+# It contains the default settings that would be used if there was no
+# /etc/lvm/lvm.conf file.
+#
+# Refer to 'man lvm.conf' for further information including the file layout.
+#
+# To put this file in a different directory and override /etc/lvm set
+# the environment variable LVM_SYSTEM_DIR before running the tools.
+#
+# N.B. Take care that each setting only appears once if uncommenting
+# example settings in this file.
+
+
+# Configuration section config.
+# How LVM configuration settings are handled.
+config {
+
+	# Configuration option config/checks.
+	# If enabled, any LVM configuration mismatch is reported.
+	# This implies checking that the configuration key is understood
+	# by LVM and that the value of the key is the proper type.
+	# If disabled, any configuration mismatch is ignored and the default
+	# value is used without any warning (a message about the
+	# configuration key not being found is issued in verbose mode only).
+	checks = 1
+
+	# Configuration option config/abort_on_errors.
+	# Abort the LVM process if a configuration mismatch is found.
+	abort_on_errors = 0
+
+	# Configuration option config/profile_dir.
+	# Directory where LVM looks for configuration profiles.
+	profile_dir = "/etc/lvm/profile"
+}
+
+# Configuration section devices.
+# How LVM uses block devices.
+devices {
+
+	# Configuration option devices/dir.
+	# Directory in which to create volume group device nodes.
+	# Commands also accept this as a prefix on volume group names.
+	# This configuration option is advanced.
+	dir = "/dev"
+
+	# Configuration option devices/scan.
+	# Directories containing device nodes to use with LVM.
+	# This configuration option is advanced.
+	scan = [ "/dev" ]
+
+	# Configuration option devices/obtain_device_list_from_udev.
+	# Obtain the list of available devices from udev.
+	# This avoids opening or using any inapplicable non-block
+	# devices or subdirectories found in the udev directory.
+	# Any device node or symlink not managed by udev in the udev
+	# directory is ignored. This setting applies only to the
+	# udev-managed device directory; other directories will be
+	# scanned fully. LVM needs to be compiled with udev support
+	# for this setting to apply.
+	obtain_device_list_from_udev = 1
+
+	# Configuration option devices/external_device_info_source.
+	# Select an external device information source.
+	# Some information may already be available in the system and
+	# LVM can use this information to determine the exact type
+	# or use of devices it processes. Using an existing external
+	# device information source can speed up device processing
+	# as LVM does not need to run its own native routines to acquire
+	# this information. For example, this information is used to
+	# drive LVM filtering like MD component detection, multipath
+	# component detection, partition detection and others.
+	# Possible options are: none, udev.
+	# none - No external device information source is used.
+	# udev - Reuse existing udev database records. Applicable
+	# only if LVM is compiled with udev support.
+	external_device_info_source = "none"
+
+	# Configuration option devices/preferred_names.
+	# Select which path name to display for a block device.
+	# If multiple path names exist for a block device,
+	# and LVM needs to display a name for the device,
+	# the path names are matched against each item in
+	# this list of regular expressions. The first match is used.
+	# Try to avoid using undescriptive /dev/dm-N names, if present.
+	# If no preferred name matches, or if preferred_names are not
+	# defined, built-in rules are used until one produces a preference.
+	# Rule 1 checks path prefixes and gives preference in this order:
+	# /dev/mapper, /dev/disk, /dev/dm-*, /dev/block (/dev from devices/dev)
+	# Rule 2 prefers the path with the least slashes.
+	# Rule 3 prefers a symlink.
+	# Rule 4 prefers the path with least value in lexicographical order.
+	# Example:
+	# preferred_names = [ "^/dev/mpath/", "^/dev/mapper/mpath", "^/dev/[hs]d" ]
+	# This configuration option does not have a default value defined.
+	# preferred_names=[]
+
+	# Configuration option devices/filter.
+	# Limit the block devices that are used by LVM commands.
+	# This is a list of regular expressions used to accept or
+	# reject block device path names.  Each regex is delimited
+	# by a vertical bar '|' (or any character) and is preceded
+	# by 'a' to accept the path, or by 'r' to reject the path.
+	# The first regex in the list to match the path is used,
+	# producing the 'a' or 'r' result for the device.
+	# When multiple path names exist for a block device, if any
+	# path name matches an 'a' pattern before an 'r' pattern,
+	# then the device is accepted. If all the path names match
+	# an 'r' pattern first, then the device is rejected.
+	# Unmatching path names do not affect the accept or reject
+	# decision. If no path names for a device match a pattern,
+	# then the device is accepted.
+	# Be careful mixing 'a' and 'r' patterns, as the combination
+	# might produce unexpected results (test any changes.)
+	# Run vgscan after changing the filter to regenerate the cache.
+	# See the use_lvmetad comment for a special case regarding filters.
+	# Example:
+	# Accept every block device.
+	# filter = [ "a|.*/|" ]
+	# Example:
+	# Reject the cdrom drive.
+	# filter = [ "r|/dev/cdrom|" ]
+	# Example:
+	# Work with just loopback devices, e.g. for testing.
+	# filter = [ "a|loop|", "r|.*|" ]
+	# Example:
+	# Accept all loop devices and ide drives except hdc.
+	# filter = [ "a|loop|", "r|/dev/hdc|", "a|/dev/ide|", "r|.*|" ]
+	# Example:
+	# Use anchors to be very specific.
+	# filter = [ "a|^/dev/hda8$|", "r|.*/|" ]
+	# This configuration option does not have a default value defined.
+	# filter = []
+
+	# Configuration option devices/global_filter.
+	# Limit the block devices that are used by LVM system components.
+	# Because devices/filter may be overridden from the command line,
+	# it is not suitable for system-wide device filtering, e.g. udev
+	# and lvmetad. Use global_filter to hide devices from these LVM
+	# system components. The syntax is the same as devices/filter.
+	# Devices rejected by global_filter are not opened by LVM.
+	# This configuration option does not have a default value defined.
+	# global_filter = []
+
+	# Configuration option devices/cache_dir.
+	# Directory in which to store the device cache file.
+	# The results of filtering are cached on disk to avoid
+	# rescanning dud devices (which can take a very long time).
+	# By default this cache is stored in a file named .cache.
+	# It is safe to delete this file; the tools regenerate it.
+	# If obtain_device_list_from_udev is enabled, the list of devices
+	# is obtained from udev and any existing .cache file is removed.
+	cache_dir = "/etc/lvm/cache"
+
+	# Configuration option devices/cache_file_prefix.
+	# A prefix used before the .cache file name. See devices/cache_dir.
+	cache_file_prefix = ""
+
+	# Configuration option devices/write_cache_state.
+	# Enable/disable writing the cache file. See devices/cache_dir.
+	write_cache_state = 1
+
+	# Configuration option devices/types.
+	# List of additional acceptable block device types.
+	# These are of device type names from /proc/devices,
+	# followed by the maximum number of partitions.
+	# Example:
+	# types = [ "fd", 16 ]
+	# This configuration option is advanced.
+	# This configuration option does not have a default value defined.
+	# types = []
+
+	# Configuration option devices/sysfs_scan.
+	# Restrict device scanning to block devices appearing in sysfs.
+	# This is a quick way of filtering out block devices that are
+	# not present on the system. sysfs must be part of the kernel
+	# and mounted.)
+	sysfs_scan = 1
+
+	# Configuration option devices/multipath_component_detection.
+	# Ignore devices that are components of DM multipath devices.
+	multipath_component_detection = 1
+
+	# Configuration option devices/md_component_detection.
+	# Ignore devices that are components of software RAID (md) devices.
+	md_component_detection = 1
+
+	# Configuration option devices/fw_raid_component_detection.
+	# Ignore devices that are components of firmware RAID devices.
+	# LVM must use an external_device_info_source other than none
+	# for this detection to execute.
+	fw_raid_component_detection = 0
+
+	# Configuration option devices/md_chunk_alignment.
+	# Align PV data blocks with md device's stripe-width.
+	# This applies if a PV is placed directly on an md device.
+	md_chunk_alignment = 1
+
+	# Configuration option devices/default_data_alignment.
+	# Default alignment of the start of a PV data area in MB.
+	# If set to 0, a value of 64KB will be used.
+	# Set to 1 for 1MiB, 2 for 2MiB, etc.
+	# default_data_alignment = 1
+
+	# Configuration option devices/data_alignment_detection.
+	# Detect PV data alignment based on sysfs device information.
+	# The start of a PV data area will be a multiple of
+	# minimum_io_size or optimal_io_size exposed in sysfs.
+	# minimum_io_size is the smallest request the device can perform
+	# without incurring a read-modify-write penalty, e.g. MD chunk size.
+	# optimal_io_size is the device's preferred unit of receiving I/O,
+	# e.g. MD stripe width.
+	# minimum_io_size is used if optimal_io_size is undefined (0).
+	# If md_chunk_alignment is enabled, that detects the optimal_io_size.
+	# This setting takes precedence over md_chunk_alignment.
+	data_alignment_detection = 1
+
+	# Configuration option devices/data_alignment.
+	# Alignment of the start of a PV data area in KB.
+	# If a PV is placed directly on an md device and
+	# md_chunk_alignment or data_alignment_detection are enabled,
+	# then this setting is ignored.  Otherwise, md_chunk_alignment
+	# and data_alignment_detection are disabled if this is set.
+	# Set to 0 to use the default alignment or the page size, if larger.
+	data_alignment = 0
+
+	# Configuration option devices/data_alignment_offset_detection.
+	# Detect PV data alignment offset based on sysfs device information.
+	# The start of a PV aligned data area will be shifted by the
+	# alignment_offset exposed in sysfs.  This offset is often 0, but
+	# may be non-zero.  Certain 4KB sector drives that compensate for
+	# windows partitioning will have an alignment_offset of 3584 bytes
+	# (sector 7 is the lowest aligned logical block, the 4KB sectors start
+	# at LBA -1, and consequently sector 63 is aligned on a 4KB boundary).
+	# pvcreate --dataalignmentoffset will skip this detection.
+	data_alignment_offset_detection = 1
+
+	# Configuration option devices/ignore_suspended_devices.
+	# Ignore DM devices that have I/O suspended while scanning devices.
+	# Otherwise, LVM waits for a suspended device to become accessible.
+	# This should only be needed in recovery situations.
+	ignore_suspended_devices = 0
+
+	# Configuration option devices/ignore_lvm_mirrors.
+	# Do not scan 'mirror' LVs to avoid possible deadlocks.
+	# This avoids possible deadlocks when using the 'mirror'
+	# segment type.  This setting determines whether logical volumes
+	# using the 'mirror' segment type are scanned for LVM labels.
+	# This affects the ability of mirrors to be used as physical volumes.
+	# If this setting is enabled, it becomes impossible to create VGs
+	# on top of mirror LVs, i.e. to stack VGs on mirror LVs.
+	# If this setting is disabled, allowing mirror LVs to be scanned,
+	# it may cause LVM processes and I/O to the mirror to become blocked.
+	# This is due to the way that the mirror segment type handles failures.
+	# In order for the hang to occur, an LVM command must be run just after
+	# a failure and before the automatic LVM repair process takes place,
+	# or there must be failures in multiple mirrors in the same VG at the
+	# same time with write failures occurring moments before a scan of the
+	# mirror's labels.
+	# The 'mirror' scanning problems do not apply to LVM RAID types like
+	# 'raid1' which handle failures in a different way, making them a
+	# better choice for VG stacking.
+	ignore_lvm_mirrors = 1
+
+	# Configuration option devices/disable_after_error_count.
+	# Number of I/O errors after which a device is skipped.
+	# During each LVM operation, errors received from each device
+	# are counted. If the counter of a device exceeds the limit set
+	# here, no further I/O is sent to that device for the remainder
+	# of the operation.
+	# Setting this to 0 disables the counters altogether.
+	disable_after_error_count = 0
+
+	# Configuration option devices/require_restorefile_with_uuid.
+	# Allow use of pvcreate --uuid without requiring --restorefile.
+	require_restorefile_with_uuid = 1
+
+	# Configuration option devices/pv_min_size.
+	# Minimum size (in KB) of block devices which can be used as PVs.
+	# In a clustered environment all nodes must use the same value.
+	# Any value smaller than 512KB is ignored.  The previous built-in
+	# value was 512.
+	pv_min_size = 2048
+
+	# Configuration option devices/issue_discards.
+	# Issue discards to PVs that are no longer used by an LV.
+	# Discards are sent to an LV's underlying physical volumes when
+	# the LV is no longer using the physical volumes' space, e.g.
+	# lvremove, lvreduce.  Discards inform the storage that a region
+	# is no longer used.  Storage that supports discards advertise
+	# the protocol-specific way discards should be issued by the
+	# kernel (TRIM, UNMAP, or WRITE SAME with UNMAP bit set).
+	# Not all storage will support or benefit from discards, but SSDs
+	# and thinly provisioned LUNs generally do.  If enabled, discards
+	# will only be issued if both the storage and kernel provide support.
+	issue_discards = 0
+}
+
+# Configuration section allocation.
+# How LVM selects free space for Logical Volumes.
+allocation {
+
+	# Configuration option allocation/cling_tag_list.
+	# Advise LVM which PVs to use when searching for new space.
+	# When searching for free space to extend an LV, the 'cling'
+	# allocation policy will choose space on the same PVs as the last
+	# segment of the existing LV.  If there is insufficient space and a
+	# list of tags is defined here, it will check whether any of them are
+	# attached to the PVs concerned and then seek to match those PV tags
+	# between existing extents and new extents.
+	# Example:
+	# Use the special tag "@*" as a wildcard to match any PV tag.
+	# cling_tag_list = [ "@*" ]
+	# Example:
+	# LVs are mirrored between two sites within a single VG.
+	# PVs are tagged with either @site1 or @site2 to indicate where
+	# they are situated.
+	# cling_tag_list = [ "@site1", "@site2" ]
+	# This configuration option does not have a default value defined.
+	# cling_tag_list = []
+
+	# Configuration option allocation/maximise_cling.
+	# Use a previous allocation algorithm.
+	# Changes made in version 2.02.85 extended the reach of the 'cling'
+	# policies to detect more situations where data can be grouped onto
+	# the same disks.  This setting can be used to disable the changes
+	# and revert to the previous algorithm.
+	maximise_cling = 1
+
+	# Configuration option allocation/use_blkid_wiping.
+	# Use blkid to detect existing signatures on new PVs and LVs.
+	# The blkid library can detect more signatures than the
+	# native LVM detection code, but may take longer.
+	# LVM needs to be compiled with blkid wiping support for
+	# this setting to apply.
+	# LVM native detection code is currently able to recognize:
+	# MD device signatures, swap signature, and LUKS signatures.
+	# To see the list of signatures recognized by blkid, check the
+	# output of the 'blkid -k' command.
+	use_blkid_wiping = 1
+
+	# Configuration option allocation/wipe_signatures_when_zeroing_new_lvs.
+	# Look for and erase any signatures while zeroing a new LV.
+	# Zeroing is controlled by the -Z/--zero option, and if not
+	# specified, zeroing is used by default if possible.
+	# Zeroing simply overwrites the first 4 KiB of a new LV
+	# with zeroes and does no signature detection or wiping.
+	# Signature wiping goes beyond zeroing and detects exact
+	# types and positions of signatures within the whole LV.
+	# It provides a cleaner LV after creation as all known
+	# signatures are wiped.  The LV is not claimed incorrectly
+	# by other tools because of old signatures from previous use.
+	# The number of signatures that LVM can detect depends on the
+	# detection code that is selected (see use_blkid_wiping.)
+	# Wiping each detected signature must be confirmed.
+	# The command line option -W/--wipesignatures takes precedence
+	# over this setting.
+	# When this setting is disabled, signatures on new LVs are
+	# not detected or erased unless the -W/--wipesignatures y
+	# option is used directly.
+	wipe_signatures_when_zeroing_new_lvs = 1
+
+	# Configuration option allocation/mirror_logs_require_separate_pvs.
+	# Mirror logs and images will always use different PVs.
+	# The default setting changed in version 2.02.85.
+	mirror_logs_require_separate_pvs = 0
+
+	# Configuration option allocation/cache_pool_metadata_require_separate_pvs.
+	# Cache pool metadata and data will always use different PVs.
+	cache_pool_metadata_require_separate_pvs = 0
+
+	# Configuration option allocation/cache_pool_cachemode.
+	# The default cache mode used for new cache pools.
+	# Possible options are: writethrough, writeback.
+	# writethrough - Data blocks are immediately written from
+	# the cache to disk.
+	# writeback - Data blocks are written from the cache back
+	# to disk after some delay to improve performance.
+	# cache_pool_cachemode = "writethrough"
+
+	# Configuration option allocation/cache_pool_chunk_size.
+	# The minimal chunk size (in kiB) for cache pool volumes.
+	# Using a chunk_size that is too large can result in wasteful
+	# use of the cache, where small reads and writes can cause
+	# large sections of an LV to be mapped into the cache.  However,
+	# choosing a chunk_size that is too small can result in more
+	# overhead trying to manage the numerous chunks that become mapped
+	# into the cache.  The former is more of a problem than the latter
+	# in most cases, so we default to a value that is on the smaller
+	# end of the spectrum.  Supported values range from 32(kiB) to
+	# 1048576 in multiples of 32.
+	# This configuration option does not have a default value defined.
+	# cache_pool_chunk_size = 128
+
+	# Configuration option allocation/thin_pool_metadata_require_separate_pvs.
+	# Thin pool metdata and data will always use different PVs.
+	thin_pool_metadata_require_separate_pvs = 0
+
+	# Configuration option allocation/thin_pool_zero.
+	# Thin pool data chunks are zeroed before they are first used.
+	# Zeroing with a larger thin pool chunk size reduces performance.
+	# thin_pool_zero = 1
+
+	# Configuration option allocation/thin_pool_discards.
+	# The discards behaviour of thin pool volumes.
+	# Possible options are: ignore, nopassdown, passdown.
+	# thin_pool_discards = "passdown"
+
+	# Configuration option allocation/thin_pool_chunk_size_policy.
+	# The chunk size calculation policy for thin pool volumes.
+	# Possible options are: generic, performance.
+	# generic - If thin_pool_chunk_size is defined, use it.
+	# Otherwise, calculate the chunk size based on estimation and
+	# device hints exposed in sysfs - the minimum_io_size.
+	# The chunk size is always at least 64KiB.
+	# performance - If thin_pool_chunk_size is defined, use it.
+	# Otherwise, calculate the chunk size for performance based on
+	# device hints exposed in sysfs - the optimal_io_size.
+	# The chunk size is always at least 512KiB.
+	# thin_pool_chunk_size_policy = "generic"
+
+	# Configuration option allocation/thin_pool_chunk_size.
+	# The minimal chunk size (in KB) for thin pool volumes.
+	# Larger chunk sizes may improve performance for plain
+	# thin volumes, however using them for snapshot volumes
+	# is less efficient, as it consumes more space and takes
+	# extra time for copying.  When unset, lvm tries to estimate
+	# chunk size starting from 64KB.  Supported values are in
+	# the range 64 to 1048576.
+	# This configuration option does not have a default value defined.
+	# thin_pool_chunk_size = 128
+
+	# Configuration option allocation/physical_extent_size.
+	# Default physical extent size to use for new VGs (in KB).
+	# physical_extent_size = 4096
+}
+
+# Configuration section log.
+# How LVM log information is reported.
+log {
+
+	# Configuration option log/verbose.
+	# Controls the messages sent to stdout or stderr.
+	verbose = 0
+
+	# Configuration option log/silent.
+	# Suppress all non-essential messages from stdout.
+	# This has the same effect as -qq.
+	# When enabled, the following commands still produce output:
+	# dumpconfig, lvdisplay, lvmdiskscan, lvs, pvck, pvdisplay,
+	# pvs, version, vgcfgrestore -l, vgdisplay, vgs.
+	# Non-essential messages are shifted from log level 4 to log level 5
+	# for syslog and lvm2_log_fn purposes.
+	# Any 'yes' or 'no' questions not overridden by other arguments
+	# are suppressed and default to 'no'.
+	silent = 0
+
+	# Configuration option log/syslog.
+	# Send log messages through syslog.
+	syslog = 1
+
+	# Configuration option log/file.
+	# Write error and debug log messages to a file specified here.
+	# This configuration option does not have a default value defined.
+	# file = ""
+
+	# Configuration option log/overwrite.
+	# Overwrite the log file each time the program is run.
+	overwrite = 0
+
+	# Configuration option log/level.
+	# The level of log messages that are sent to the log file or syslog.
+	# There are 6 syslog-like log levels currently in use: 2 to 7 inclusive.
+	# 7 is the most verbose (LOG_DEBUG).
+	level = 0
+
+	# Configuration option log/indent.
+	# Indent messages according to their severity.
+	indent = 1
+
+	# Configuration option log/command_names.
+	# Display the command name on each line of output.
+	command_names = 0
+
+	# Configuration option log/prefix.
+	# A prefix to use before the log message text.
+	# (After the command name, if selected).
+	# Two spaces allows you to see/grep the severity of each message.
+	# To make the messages look similar to the original LVM tools use:
+	# indent = 0, command_names = 1, prefix = " -- "
+	prefix = "  "
+
+	# Configuration option log/activation.
+	# Log messages during activation.
+	# Don't use this in low memory situations (can deadlock).
+	# activation = 0
+
+	# Configuration option log/debug_classes.
+	# Select log messages by class.
+	# Some debugging messages are assigned to a class
+	# and only appear in debug output if the class is
+	# listed here.  Classes currently available:
+	# memory, devices, activation, allocation,
+	# lvmetad, metadata, cache, locking, lvmpolld.
+	# Use "all" to see everything.
+	debug_classes = ["memory", "devices", "activation", "allocation",
+			 "lvmetad", "metadata", "cache", "locking", "lvmpolld"]
+}
+
+# Configuration section backup.
+# How LVM metadata is backed up and archived.
+# In LVM, a 'backup' is a copy of the metadata for the
+# current system, and an 'archive' contains old metadata
+# configurations. They are stored in a human readable
+# text format.
+backup {
+
+	# Configuration option backup/backup.
+	# Maintain a backup of the current metadata configuration.
+	# Think very hard before turning this off!
+	backup = 1
+
+	# Configuration option backup/backup_dir.
+	# Location of the metadata backup files.
+	# Remember to back up this directory regularly!
+	backup_dir = "/etc/lvm/backup"
+
+	# Configuration option backup/archive.
+	# Maintain an archive of old metadata configurations.
+	# Think very hard before turning this off.
+	archive = 1
+
+	# Configuration option backup/archive_dir.
+	# Location of the metdata archive files.
+	# Remember to back up this directory regularly!
+	archive_dir = "/etc/lvm/archive"
+
+	# Configuration option backup/retain_min.
+	# Minimum number of archives to keep.
+	retain_min = 10
+
+	# Configuration option backup/retain_days.
+	# Minimum number of days to keep archive files.
+	retain_days = 30
+}
+
+# Configuration section shell.
+# Settings for running LVM in shell (readline) mode.
+shell {
+
+	# Configuration option shell/history_size.
+	# Number of lines of history to store in ~/.lvm_history.
+	history_size = 100
+}
+
+# Configuration section global.
+# Miscellaneous global LVM settings.
+global {
+
+	# Configuration option global/umask.
+	# The file creation mask for any files and directories created.
+	# Interpreted as octal if the first digit is zero.
+	umask = 077
+
+	# Configuration option global/test.
+	# No on-disk metadata changes will be made in test mode.
+	# Equivalent to having the -t option on every command.
+	test = 0
+
+	# Configuration option global/units.
+	# Default value for --units argument.
+	units = "h"
+
+	# Configuration option global/si_unit_consistency.
+	# Distinguish between powers of 1024 and 1000 bytes.
+	# The LVM commands distinguish between powers of 1024 bytes,
+	# e.g. KiB, MiB, GiB, and powers of 1000 bytes, e.g. KB, MB, GB.
+	# If scripts depend on the old behaviour, disable
+	# this setting temporarily until they are updated.
+	si_unit_consistency = 1
+
+	# Configuration option global/suffix.
+	# Display unit suffix for sizes.
+	# This setting has no effect if the units are in human-readable
+	# form (global/units = "h") in which case the suffix is always
+	# displayed.
+	suffix = 1
+
+	# Configuration option global/activation.
+	# Enable/disable communication with the kernel device-mapper.
+	# Disable to use the tools to manipulate LVM metadata without
+	# activating any logical volumes. If the device-mapper driver
+	# is not present in the kernel, disabling this should suppress
+	# the error messages.
+	activation = 1
+
+	# Configuration option global/fallback_to_lvm1.
+	# Try running LVM1 tools if LVM cannot communicate with DM.
+	# This option only applies to 2.4 kernels and is provided to
+	# help switch between device-mapper kernels and LVM1 kernels.
+	# The LVM1 tools need to be installed with .lvm1 suffices,
+	# e.g. vgscan.lvm1. They will stop working once the lvm2
+	# on-disk metadata format is used.
+	# fallback_to_lvm1 = 0
+
+	# Configuration option global/format.
+	# The default metadata format that commands should use.
+	# "lvm1" or "lvm2".
+	# The command line override is -M1 or -M2.
+	# format = "lvm2"
+
+	# Configuration option global/format_libraries.
+	# Shared libraries that process different metadata formats.
+	# If support for LVM1 metadata was compiled as a shared library use
+	# format_libraries = "liblvm2format1.so"
+	# This configuration option does not have a default value defined.
+	# format_libraries = []
+
+	# Configuration option global/segment_libraries.
+	# This configuration option does not have a default value defined.
+	# segment_libraries = []
+
+	# Configuration option global/proc.
+	# Location of proc filesystem.
+	# This configuration option is advanced.
+	proc = "/proc"
+
+	# Configuration option global/etc.
+	# Location of /etc system configuration directory.
+	etc = "/etc"
+
+	# Configuration option global/locking_type.
+	# Type of locking to use.
+	# Type 0: turns off locking. Warning: this risks metadata
+	# corruption if commands run concurrently.
+	# Type 1: uses local file-based locking, the standard mode.
+	# Type 2: uses the external shared library locking_library.
+	# Type 3: uses built-in clustered locking with clvmd.
+	# This is incompatible with lvmetad. If use_lvmetad is enabled,
+	# lvm prints a warning and disables lvmetad use.
+	# Type 4: uses read-only locking which forbids any operations
+	# that might change metadata.
+	# Type 5: offers dummy locking for tools that do not need any locks.
+	# You should not need to set this directly; the tools will select
+	# when to use it instead of the configured locking_type.
+	# Do not use lvmetad or the kernel device-mapper driver with this
+	# locking type. It is used by the --readonly option that offers
+	# read-only access to Volume Group metadata that cannot be locked
+	# safely because it belongs to an inaccessible domain and might be
+	# in use, for example a virtual machine image or a disk that is
+	# shared by a clustered machine.
+	locking_type = 1
+
+	# Configuration option global/wait_for_locks.
+	# When disabled, fail if a lock request would block.
+	wait_for_locks = 1
+
+	# Configuration option global/fallback_to_clustered_locking.
+	# Attempt to use built-in cluster locking if locking_type 2 fails.
+	# If using external locking (type 2) and initialisation fails,
+	# with this enabled, an attempt will be made to use the built-in
+	# clustered locking.
+	# If you are using a customised locking_library you should disable this.
+	fallback_to_clustered_locking = 1
+
+	# Configuration option global/fallback_to_local_locking.
+	# Use locking_type 1 (local) if locking_type 2 or 3 fail.
+	# If an attempt to initialise type 2 or type 3 locking failed,
+	# perhaps because cluster components such as clvmd are not
+	# running, with this enabled, an attempt will be made to use
+	# local file-based locking (type 1). If this succeeds, only
+	# commands against local volume groups will proceed.
+	# Volume Groups marked as clustered will be ignored.
+	fallback_to_local_locking = 1
+
+	# Configuration option global/locking_dir.
+	# Directory to use for LVM command file locks.
+	# Local non-LV directory that holds file-based locks
+	# while commands are in progress.  A directory like
+	# /tmp that may get wiped on reboot is OK.
+	locking_dir = "/run/lock/lvm"
+
+	# Configuration option global/prioritise_write_locks.
+	# Allow quicker VG write access during high volume read access.
+	# When there are competing read-only and read-write access
+	# requests for a volume group's metadata, instead of always
+	# granting the read-only requests immediately, delay them to
+	# allow the read-write requests to be serviced.  Without this
+	# setting, write access may be stalled by a high volume of
+	# read-only requests.
+	# This option only affects locking_type 1 viz.
+	# local file-based locking.
+	prioritise_write_locks = 1
+
+	# Configuration option global/library_dir.
+	# Search this directory first for shared libraries.
+	# This configuration option does not have a default value defined.
+	# library_dir = ""
+
+	# Configuration option global/locking_library.
+	# The external locking library to use for locking_type 2.
+	# locking_library = "liblvm2clusterlock.so"
+
+	# Configuration option global/abort_on_internal_errors.
+	# Abort a command that encounters an internal error.
+	# Treat any internal errors as fatal errors, aborting
+	# the process that encountered the internal error.
+	# Please only enable for debugging.
+	abort_on_internal_errors = 0
+
+	# Configuration option global/detect_internal_vg_cache_corruption.
+	# Internal verification of VG structures.
+	# Check if CRC matches when a parsed VG is
+	# used multiple times. This is useful to catch
+	# unexpected changes to cached VG structures.
+	# Please only enable for debugging.
+	detect_internal_vg_cache_corruption = 0
+
+	# Configuration option global/metadata_read_only.
+	# No operations that change on-disk metadata are permitted.
+	# Additionally, read-only commands that encounter metadata
+	# in need of repair will still be allowed to proceed exactly
+	# as if the repair had been performed (except for the unchanged
+	# vg_seqno). Inappropriate use could mess up your system,
+	# so seek advice first!
+	metadata_read_only = 0
+
+	# Configuration option global/mirror_segtype_default.
+	# The segment type used by the short mirroring option -m.
+	# Possible options are: mirror, raid1.
+	# mirror - the original RAID1 implementation from LVM/DM.
+	# It is characterized by a flexible log solution (core,
+	# disk, mirrored), and by the necessity to block I/O while
+	# handling a failure.
+	# There is an inherent race in the dmeventd failure
+	# handling logic with snapshots of devices using this
+	# type of RAID1 that in the worst case could cause a
+	# deadlock. (Also see devices/ignore_lvm_mirrors.)
+	# raid1 - a newer RAID1 implementation using the MD RAID1
+	# personality through device-mapper.  It is characterized
+	# by a lack of log options. (A log is always allocated for
+	# every device and they are placed on the same device as the
+	# image - no separate devices are required.)  This mirror
+	# implementation does not require I/O to be blocked while
+	# handling a failure. This mirror implementation is not
+	# cluster-aware and cannot be used in a shared (active/active)
+	# fashion in a cluster.
+	# The '--type mirror|raid1' option overrides this setting.
+	mirror_segtype_default = "raid1"
+
+	# Configuration option global/raid10_segtype_default.
+	# The segment type used by the -i -m combination.
+	# The --stripes/-i and --mirrors/-m options can both
+	# be specified during the creation of a logical volume
+	# to use both striping and mirroring for the LV.
+	# There are two different implementations.
+	# Possible options are: raid10, mirror.
+	# raid10 - LVM uses MD's RAID10 personality through DM.
+	# mirror - LVM layers the 'mirror' and 'stripe' segment types.
+	# The layering is done by creating a mirror LV on top of
+	# striped sub-LVs, effectively creating a RAID 0+1 array.
+	# The layering is suboptimal in terms of providing redundancy
+	# and performance. The 'raid10' option is perferred.
+	# The '--type raid10|mirror' option overrides this setting.
+	raid10_segtype_default = "raid10"
+
+	# Configuration option global/sparse_segtype_default.
+	# The segment type used by the -V -L combination.
+	# The combination of -V and -L options creates a
+	# sparse LV. There are two different implementations.
+	# Possible options are: snapshot, thin.
+	# snapshot - The original snapshot implementation from LVM/DM.
+	# It uses an old snapshot that mixes data and metadata within
+	# a single COW storage volume and performs poorly when the
+	# size of stored data passes hundreds of MB.
+	# thin - A newer implementation that uses thin provisioning.
+	# It has a bigger minimal chunk size (64KiB) and uses a separate
+	# volume for metadata. It has better performance, especially
+	# when more data is used.  It also supports full snapshots.
+	# The '--type snapshot|thin' option overrides this setting.
+	sparse_segtype_default = "thin"
+
+	# Configuration option global/lvdisplay_shows_full_device_path.
+	# The default format for displaying LV names in lvdisplay was changed
+	# in version 2.02.89 to show the LV name and path separately.
+	# Previously this was always shown as /dev/vgname/lvname even when that
+	# was never a valid path in the /dev filesystem.
+	# Enable this option to reinstate the previous format.
+	# lvdisplay_shows_full_device_path = 0
+
+	# Configuration option global/use_lvmetad.
+	# Use lvmetad to cache metadata and reduce disk scanning.
+	# When enabled (and running), lvmetad provides LVM commands
+	# with VG metadata and PV state.  LVM commands then avoid
+	# reading this information from disks which can be slow.
+	# When disabled (or not running), LVM commands fall back to
+	# scanning disks to obtain VG metadata.
+	# lvmetad is kept updated via udev rules which must be set
+	# up for LVM to work correctly. (The udev rules should be
+	# installed by default.) Without a proper udev setup, changes
+	# in the system's block device configuration will be unknown
+	# to LVM, and ignored until a manual 'pvscan --cache' is run.
+	# If lvmetad was running while use_lvmetad was disabled,
+	# it must be stopped, use_lvmetad enabled, and then started.
+	# When using lvmetad, LV activation is switched to an automatic,
+	# event-based mode.  In this mode, LVs are activated based on
+	# incoming udev events that inform lvmetad when PVs appear on
+	# the system. When a VG is complete (all PVs present), it is
+	# auto-activated. The auto_activation_volume_list setting
+	# controls which LVs are auto-activated (all by default.)
+	# When lvmetad is updated (automatically by udev events, or
+	# directly by pvscan --cache), devices/filter is ignored and
+	# all devices are scanned by default. lvmetad always keeps
+	# unfiltered information which is provided to LVM commands.
+	# Each LVM command then filters based on devices/filter.
+	# This does not apply to other, non-regexp, filtering settings:
+	# component filters such as multipath and MD are checked
+	# during pvscan --cache.
+	# To filter a device and prevent scanning from the LVM system
+	# entirely, including lvmetad, use devices/global_filter.
+	# lvmetad is not compatible with locking_type 3 (clustering).
+	# LVM prints warnings and ignores lvmetad if this combination
+	# is seen.
+	use_lvmetad = 1
+
+	# Configuration option global/thin_check_executable.
+	# The full path to the thin_check command.
+	# LVM uses this command to check that a thin metadata
+	# device is in a usable state.
+	# When a thin pool is activated and after it is deactivated,
+	# this command is run. Activation will only proceed if the
+	# command has an exit status of 0.
+	# Set to "" to skip this check.  (Not recommended.)
+	# Also see thin_check_options.
+	# The thin tools are available from the package
+	# device-mapper-persistent-data.
+	# thin_check_executable = "/usr/sbin/thin_check"
+
+	# Configuration option global/thin_dump_executable.
+	# The full path to the thin_dump command.
+	# LVM uses this command to dump thin pool metadata.
+	# (For thin tools, see thin_check_executable.)
+	# thin_dump_executable = "/usr/sbin/thin_dump"
+
+	# Configuration option global/thin_repair_executable.
+	# The full path to the thin_repair command.
+	# LVM uses this command to repair a thin metadata device
+	# if it is in an unusable state.
+	# Also see thin_repair_options.
+	# (For thin tools, see thin_check_executable.)
+	# thin_repair_executable = "/usr/sbin/thin_repair"
+
+	# Configuration option global/thin_check_options.
+	# List of options passed to the thin_check command.
+	# With thin_check version 2.1 or newer you can add
+	# --ignore-non-fatal-errors to let it pass through
+	# ignorable errors and fix them later.
+	# With thin_check version 3.2 or newer you should add
+	# --clear-needs-check-flag.
+	# thin_check_options = ["-q", "--clear-needs-check-flag"]
+
+	# Configuration option global/thin_repair_options.
+	# List of options passed to the thin_repair command.
+	# This configuration option does not have a default value defined.
+	# thin_repair_options = ""
+
+	# Configuration option global/thin_disabled_features.
+	# Features to not use in the thin driver.
+	# This can be helpful for testing, or to avoid
+	# using a feature that is causing problems.
+	# Features: block_size, discards, discards_non_power_2,
+	# external_origin, metadata_resize, external_origin_extend,
+	# error_if_no_space.
+	# Example:
+	# thin_disabled_features = [ "discards", "block_size" ]
+	# This configuration option does not have a default value defined.
+	# thin_disabled_features = []
+
+	# Configuration option global/cache_check_executable.
+	# The full path to the cache_check command.
+	# LVM uses this command to check that a cache metadata
+	# device is in a usable state.
+	# When a cached LV is activated and after it is deactivated,
+	# this command is run. Activation will only proceed if the
+	# command has an exit status of 0.
+	# Set to "" to skip this check.  (Not recommended.)
+	# Also see cache_check_options.
+	# The cache tools are available from the package
+	# device-mapper-persistent-data.
+	# cache_check_executable = "/usr/sbin/cache_check"
+
+	# Configuration option global/cache_dump_executable.
+	# The full path to the cache_dump command.
+	# LVM uses this command to dump cache pool metadata.
+	# (For cache tools, see cache_check_executable.)
+	# cache_dump_executable = "/usr/sbin/cache_dump"
+
+	# Configuration option global/cache_repair_executable.
+	# The full path to the cache_repair command.
+	# LVM uses this command to repair a cache metadata device
+	# if it is in an unusable state.
+	# Also see cache_repair_options.
+	# (For cache tools, see cache_check_executable.)
+	# cache_repair_executable = "/usr/sbin/cache_repair"
+
+	# Configuration option global/cache_check_options.
+	# List of options passed to the cache_check command.
+	# cache_check_options = "-q"
+
+	# Configuration option global/cache_repair_options.
+	# List of options passed to the cache_repair command.
+	# This configuration option does not have a default value defined.
+	# cache_repair_options = ""
+
+	# Configuration option global/system_id_source.
+	# The method LVM uses to set the local system ID.
+	# Volume Groups can also be given a system ID (by
+	# vgcreate, vgchange, or vgimport.)
+	# A VG on shared storage devices is accessible only
+	# to the host with a matching system ID.
+	# See 'man lvmsystemid' for information on limitations
+	# and correct usage.
+	# Possible options are: none, lvmlocal, uname, machineid, file.
+	# none - The host has no system ID.
+	# lvmlocal - Obtain the system ID from the system_id setting in the
+	# 'local' section of an lvm configuration file, e.g. lvmlocal.conf.
+	# uname - Set the system ID from the hostname (uname) of the system.
+	# System IDs beginning localhost are not permitted.
+	# machineid - Use the contents of the file /etc/machine-id to set the
+	# system ID.  Some systems create this file at installation time.
+	# See 'man machine-id'.
+	# file - Use the contents of another file (system_id_file) to set
+	# the system ID.
+	# system_id_source = "none"
+
+	# Configuration option global/system_id_file.
+	# The full path to the file containing a system ID.
+	# This is used when system_id_source is set to 'file'.
+	# Comments starting with the character # are ignored.
+	# This configuration option does not have a default value defined.
+	# system_id_file = ""
+
+	# Use lvmpolld to supervise long running LVM commands.
+	# When enabled, control of long running LVM commands is transferred
+	# from the original LVM command to the lvmpolld daemon. This allows
+	# the operation to continue independent of the original LVM command.
+	# After lvmpolld takes over, the LVM command displays the progress
+	# of the ongoing operation. lvmpolld itself runs LVM commands to manage
+	# the progress of ongoing operations. lvmpolld can be used as a native
+	# systemd service, which allows it to be started on demand, and to use
+	# its own control group. When this option is disabled, LVM commands will
+	# supervise long running operations by forking themselves.
+	use_lvmpolld = 0
+}
+
+# Configuration section activation.
+activation {
+
+	# Configuration option activation/checks.
+	# Perform internal checks of libdevmapper operations.
+	# Useful for debugging problems with activation.
+	# Some of the checks may be expensive, so it's best to use
+	# this only when there seems to be a problem.
+	checks = 0
+
+	# Configuration option activation/udev_sync.
+	# Use udev notifications to synchronize udev and LVM.
+	# When disabled, LVM commands will not wait for notifications
+	# from udev, but continue irrespective of any possible udev
+	# processing in the background.  Only use this if udev is not
+	# running or has rules that ignore the devices LVM creates.
+	# If enabled when udev is not running, and LVM processes
+	# are waiting for udev, run 'dmsetup udevcomplete_all' to
+	# wake them up.
+	# The '--nodevsync' option overrides this setting.
+	udev_sync = 1
+
+	# Configuration option activation/udev_rules.
+	# Use udev rules to manage LV device nodes and symlinks.
+	# When disabled, LVM will manage the device nodes and
+	# symlinks for active LVs itself.
+	# Manual intervention may be required if this setting is
+	# changed while LVs are active.
+	udev_rules = 1
+
+	# Configuration option activation/verify_udev_operations.
+	# Use extra checks in LVM to verify udev operations.
+	# This enables additional checks (and if necessary,
+	# repairs) on entries in the device directory after
+	# udev has completed processing its events.
+	# Useful for diagnosing problems with LVM/udev interactions.
+	verify_udev_operations = 0
+
+	# Configuration option activation/retry_deactivation.
+	# Retry failed LV deactivation.
+	# If LV deactivation fails, LVM will retry for a few
+	# seconds before failing. This may happen because a
+	# process run from a quick udev rule temporarily opened
+	# the device.
+	retry_deactivation = 1
+
+	# Configuration option activation/missing_stripe_filler.
+	# Method to fill missing stripes when activating an incomplete LV.
+	# Using 'error' will make inaccessible parts of the device return
+	# I/O errors on access.  You can instead use a device path, in which
+	# case, that device will be used in place of missing stripes.
+	# Using anything other than 'error' with mirrored or snapshotted
+	# volumes is likely to result in data corruption.
+	# This configuration option is advanced.
+	missing_stripe_filler = "error"
+
+	# Configuration option activation/use_linear_target.
+	# Use the linear target to optimize single stripe LVs.
+	# When disabled, the striped target is used. The linear
+	# target is an optimised version of the striped target
+	# that only handles a single stripe.
+	use_linear_target = 1
+
+	# Configuration option activation/reserved_stack.
+	# Stack size in KB to reserve for use while devices are suspended.
+	# Insufficent reserve risks I/O deadlock during device suspension.
+	reserved_stack = 64
+
+	# Configuration option activation/reserved_memory.
+	# Memory size in KB to reserve for use while devices are suspended.
+	# Insufficent reserve risks I/O deadlock during device suspension.
+	reserved_memory = 8192
+
+	# Configuration option activation/process_priority.
+	# Nice value used while devices are suspended.
+	# Use a high priority so that LVs are suspended
+	# for the shortest possible time.
+	process_priority = -18
+
+	# Configuration option activation/volume_list.
+	# Only LVs selected by this list are activated.
+	# If this list is defined, an LV is only activated
+	# if it matches an entry in this list.
+	# If this list is undefined, it imposes no limits
+	# on LV activation (all are allowed).
+	# Possible options are: vgname, vgname/lvname, @tag, @*
+	# vgname is matched exactly and selects all LVs in the VG.
+	# vgname/lvname is matched exactly and selects the LV.
+	# @tag selects if tag matches a tag set on the LV or VG.
+	# @* selects if a tag defined on the host is also set on
+	# the LV or VG.  See tags/hosttags.
+	# If any host tags exist but volume_list is not defined,
+	# a default single-entry list containing '@*' is assumed.
+	# Example:
+	# volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
+	# This configuration option does not have a default value defined.
+	# volume_list = []
+
+	# Configuration option activation/auto_activation_volume_list.
+	# Only LVs selected by this list are auto-activated.
+	# This list works like volume_list, but it is used
+	# only by auto-activation commands. It does not apply
+	# to direct activation commands.
+	# If this list is defined, an LV is only auto-activated
+	# if it matches an entry in this list.
+	# If this list is undefined, it imposes no limits
+	# on LV auto-activation (all are allowed.)
+	# If this list is defined and empty, i.e. "[]",
+	# then no LVs are selected for auto-activation.
+	# An LV that is selected by this list for
+	# auto-activation, must also be selected by
+	# volume_list (if defined) before it is activated.
+	# Auto-activation is an activation command that
+	# includes the 'a' argument: --activate ay or -a ay,
+	# e.g. vgchange -a ay, or lvchange -a ay vgname/lvname.
+	# The 'a' (auto) argument for auto-activation is
+	# meant to be used by activation commands that are
+	# run automatically by the system, as opposed to
+	# LVM commands run directly by a user. A user may
+	# also use the 'a' flag directly to perform auto-
+	# activation.
+	# An example of a system-generated auto-activation
+	# command is 'pvscan --cache -aay' which is generated
+	# when udev and lvmetad detect a new VG has appeared
+	# on the system, and want LVs in it to be auto-activated.
+	# Possible options are: vgname, vgname/lvname, @tag, @*
+	# See volume_list for how these options are matched to LVs.
+	# This configuration option does not have a default value defined.
+	# auto_activation_volume_list = []
+
+	# Configuration option activation/read_only_volume_list.
+	# LVs in this list are activated in read-only mode.
+	# If this list is defined, each LV that is to be activated
+	# is checked against this list, and if it matches, it is
+	# activated in read-only mode.
+	# This overrides the permission setting stored in the
+	# metadata, e.g. from --permission rw.
+	# Possible options are: vgname, vgname/lvname, @tag, @*
+	# See volume_list for how these options are matched to LVs.
+	# This configuration option does not have a default value defined.
+	# read_only_volume_list = []
+
+	# Configuration option activation/raid_region_size.
+	# Size in KiB of each raid or mirror synchronization region.
+	# For raid or mirror segment types, this is the amount of
+	# data that is copied at once when initializing, or moved
+	# at once by pvmove.
+	raid_region_size = 512
+
+	# Configuration option activation/error_when_full.
+	# Return errors if a thin pool runs out of space.
+	# When enabled, writes to thin LVs immediately return
+	# an error if the thin pool is out of data space.
+	# When disabled, writes to thin LVs are queued if the
+	# thin pool is out of space, and processed when the
+	# thin pool data space is extended.
+	# New thin pools are assigned the behavior defined here.
+	# The '--errorwhenfull y|n' option overrides this setting.
+	# error_when_full = 0
+
+	# Configuration option activation/readahead.
+	# Setting to use when there is no readahead setting in metadata.
+	# Possible options are: none, auto.
+	# none - Disable readahead.
+	# auto - Use default value chosen by kernel.
+	readahead = "auto"
+
+	# Configuration option activation/raid_fault_policy.
+	# Defines how a device failure in a RAID LV is handled.
+	# This includes LVs that have the following segment types:
+	# raid1, raid4, raid5*, and raid6*.
+	# If a device in the LV fails, the policy determines the
+	# steps perfomed by dmeventd automatically, and the steps
+	# perfomed by 'lvconvert --repair --use-policies' run manually.
+	# Automatic handling requires dmeventd to be monitoring the LV.
+	# Possible options are: warn, allocate.
+	# warn - Use the system log to warn the user that a device
+	# in the RAID LV has failed.  It is left to the user to run
+	# 'lvconvert --repair' manually to remove or replace the failed
+	# device.  As long as the number of failed devices does not
+	# exceed the redundancy of the logical volume (1 device for
+	# raid4/5, 2 for raid6, etc) the LV will remain usable.
+	# allocate - Attempt to use any extra physical volumes in the
+	# volume group as spares and replace faulty devices.
+	raid_fault_policy = "warn"
+
+	# Configuration option activation/mirror_image_fault_policy.
+	# Defines how a device failure in a 'mirror' LV is handled.
+	# An LV with the 'mirror' segment type is composed of mirror
+	# images (copies) and a mirror log.
+	# A disk log ensures that a mirror LV does not need to be
+	# re-synced (all copies made the same) every time a machine
+	# reboots or crashes.
+	# If a device in the LV fails, this policy determines the
+	# steps perfomed by dmeventd automatically, and the steps
+	# performed by 'lvconvert --repair --use-policies' run manually.
+	# Automatic handling requires dmeventd to be monitoring the LV.
+	# Possible options are: remove, allocate, allocate_anywhere.
+	# remove - Simply remove the faulty device and run without it.
+	# If the log device fails, the mirror would convert to using
+	# an in-memory log.  This means the mirror will not
+	# remember its sync status across crashes/reboots and
+	# the entire mirror will be re-synced.
+	# If a mirror image fails, the mirror will convert to a
+	# non-mirrored device if there is only one remaining good copy.
+	# allocate - Remove the faulty device and try to allocate space
+	# on a new device to be a replacement for the failed device.
+	# Using this policy for the log is fast and maintains the
+	# ability to remember sync state through crashes/reboots.
+	# Using this policy for a mirror device is slow, as it
+	# requires the mirror to resynchronize the devices, but it
+	# will preserve the mirror characteristic of the device.
+	# This policy acts like 'remove' if no suitable device and
+	# space can be allocated for the replacement.
+	# allocate_anywhere - Not yet implemented. Useful to place
+	# the log device temporarily on the same physical volume as
+	# one of the mirror images. This policy is not recommended
+	# for mirror devices since it would break the redundant nature
+	# of the mirror. This policy acts like 'remove' if no suitable
+	# device and space can be allocated for the replacement.
+	mirror_image_fault_policy = "remove"
+
+	# Configuration option activation/mirror_log_fault_policy.
+	# Defines how a device failure in a 'mirror' log LV is handled.
+	# The mirror_image_fault_policy description for mirrored LVs
+	# also applies to mirrored log LVs.
+	mirror_log_fault_policy = "allocate"
+
+	# Configuration option activation/snapshot_autoextend_threshold.
+	# Auto-extend a snapshot when its usage exceeds this percent.
+	# Setting this to 100 disables automatic extension.
+	# The minimum value is 50 (a smaller value is treated as 50.)
+	# Also see snapshot_autoextend_percent.
+	# Automatic extension requires dmeventd to be monitoring the LV.
+	# Example:
+	# With snapshot_autoextend_threshold 70 and
+	# snapshot_autoextend_percent 20, whenever a snapshot
+	# exceeds 70% usage, it will be extended by another 20%.
+	# For a 1G snapshot, using 700M will trigger a resize to 1.2G.
+	# When the usage exceeds 840M, the snapshot will be extended
+	# to 1.44G, and so on.
+	snapshot_autoextend_threshold = 100
+
+	# Configuration option activation/snapshot_autoextend_percent.
+	# Auto-extending a snapshot adds this percent extra space.
+	# The amount of additional space added to a snapshot is this
+	# percent of its current size.
+	# Also see snapshot_autoextend_threshold.
+	snapshot_autoextend_percent = 20
+
+	# Configuration option activation/thin_pool_autoextend_threshold.
+	# Auto-extend a thin pool when its usage exceeds this percent.
+	# Setting this to 100 disables automatic extension.
+	# The minimum value is 50 (a smaller value is treated as 50.)
+	# Also see thin_pool_autoextend_percent.
+	# Automatic extension requires dmeventd to be monitoring the LV.
+	# Example:
+	# With thin_pool_autoextend_threshold 70 and
+	# thin_pool_autoextend_percent 20, whenever a thin pool
+	# exceeds 70% usage, it will be extended by another 20%.
+	# For a 1G thin pool, using up 700M will trigger a resize to 1.2G.
+	# When the usage exceeds 840M, the thin pool will be extended
+	# to 1.44G, and so on.
+	thin_pool_autoextend_threshold = 100
+
+	# Configuration option activation/thin_pool_autoextend_percent.
+	# Auto-extending a thin pool adds this percent extra space.
+	# The amount of additional space added to a thin pool is this
+	# percent of its current size.
+	thin_pool_autoextend_percent=20
+
+	# Configuration option activation/mlock_filter.
+	# Do not mlock these memory areas.
+	# While activating devices, I/O to devices being
+	# (re)configured is suspended. As a precaution against
+	# deadlocks, LVM pins memory it is using so it is not
+	# paged out, and will not require I/O to reread.
+	# Groups of pages that are known not to be accessed during
+	# activation do not need to be pinned into memory.
+	# Each string listed in this setting is compared against
+	# each line in /proc/self/maps, and the pages corresponding
+	# to lines that match are not pinned.  On some systems,
+	# locale-archive was found to make up over 80% of the memory
+	# used by the process.
+	# Example:
+	# mlock_filter = [ "locale/locale-archive", "gconv/gconv-modules.cache" ]
+	# This configuration option is advanced.
+	# This configuration option does not have a default value defined.
+	# mlock_filter = []
+
+	# Configuration option activation/use_mlockall.
+	# Use the old behavior of mlockall to pin all memory.
+	# Prior to version 2.02.62, LVM used mlockall() to pin
+	# the whole process's memory while activating devices.
+	use_mlockall = 0
+
+	# Configuration option activation/monitoring.
+	# Monitor LVs that are activated.
+	# When enabled, LVM will ask dmeventd to monitor LVs
+	# that are activated.
+	# The '--ignoremonitoring' option overrides this setting.
+	monitoring = 1
+
+	# Configuration option activation/polling_interval.
+	# Check pvmove or lvconvert progress at this interval (seconds)
+	# When pvmove or lvconvert must wait for the kernel to finish
+	# synchronising or merging data, they check and report progress
+	# at intervals of this number of seconds.
+	# If this is set to 0 and there is only one thing to wait for,
+	# there are no progress reports, but the process is awoken
+	# immediately once the operation is complete.
+	polling_interval = 15
+
+	# Configuration option activation/auto_set_activation_skip.
+	# Set the activation skip flag on new thin snapshot LVs.
+	# An LV can have a persistent 'activation skip' flag.
+	# The flag causes the LV to be skipped during normal activation.
+	# The lvchange/vgchange -K option is required to activate LVs
+	# that have the activation skip flag set.
+	# When this setting is enabled, the activation skip flag is
+	# set on new thin snapshot LVs.
+	# The '--setactivationskip y|n' option overrides this setting.
+	# auto_set_activation_skip = 1
+
+	# Configuration option activation/activation_mode.
+	# How LVs with missing devices are activated.
+	# Possible options are: complete, degraded, partial.
+	# complete - Only allow activation of an LV if all of
+	# the Physical Volumes it uses are present.  Other PVs
+	# in the Volume Group may be missing.
+	# degraded - Like complete, but additionally RAID LVs of
+	# segment type raid1, raid4, raid5, radid6 and raid10 will
+	# be activated if there is no data loss, i.e. they have
+	# sufficient redundancy to present the entire addressable
+	# range of the Logical Volume.
+	# partial - Allows the activation of any LV even if a
+	# missing or failed PV could cause data loss with a
+	# portion of the Logical Volume inaccessible.
+	# This setting should not normally be used, but may
+	# sometimes assist with data recovery.
+	# The '--activationmode' option overrides this setting.
+	activation_mode = "degraded"
+}
+
+# Configuration section metadata.
+# metadata {
+
+	# Configuration option metadata/pvmetadatacopies.
+	# Number of copies of metadata to store on each PV.
+	# Possible options are: 0, 1, 2.
+	# If set to 2, two copies of the VG metadata are stored on
+	# the PV, one at the front of the PV, and one at the end.
+	# If set to 1, one copy is stored at the front of the PV.
+	# If set to 0, no copies are stored on the PV. This may
+	# be useful with VGs containing large numbers of PVs.
+	# The '--pvmetadatacopies' option overrides this setting.
+	# This configuration option is advanced.
+	# pvmetadatacopies = 1
+
+	# Configuration option metadata/vgmetadatacopies.
+	# Number of copies of metadata to maintain for each VG.
+	# If set to a non-zero value, LVM automatically chooses which of
+	# the available metadata areas to use to achieve the requested
+	# number of copies of the VG metadata.  If you set a value larger
+	# than the the total number of metadata areas available, then
+	# metadata is stored in them all.
+	# The value 0 (unmanaged) disables this automatic management
+	# and allows you to control which metadata areas are used at
+	# the individual PV level using 'pvchange --metadataignore y|n'.
+	# The '--vgmetadatacopies' option overrides this setting.
+	# vgmetadatacopies = 0
+
+	# Configuration option metadata/pvmetadatasize.
+	# Approximate number of sectors to use for each metadata copy.
+	# VGs with large numbers of PVs or LVs, or VGs containing
+	# complex LV structures, may need additional space for VG
+	# metadata. The metadata areas are treated as circular buffers,
+	# so unused space becomes filled with an archive of the most
+	# recent previous versions of the metadata.
+	# pvmetadatasize = 255
+
+	# Configuration option metadata/pvmetadataignore.
+	# Ignore metadata areas on a new PV.
+	# If metadata areas on a PV are ignored, LVM will not store
+	# metadata in them.
+	# The '--metadataignore' option overrides this setting.
+	# This configuration option is advanced.
+	# pvmetadataignore = 0
+
+	# Configuration option metadata/stripesize.
+	# This configuration option is advanced.
+	# stripesize = 64
+
+	# Configuration option metadata/dirs.
+	# Directories holding live copies of text format metadata.
+	# These directories must not be on logical volumes!
+	# It's possible to use LVM with a couple of directories here,
+	# preferably on different (non-LV) filesystems, and with no other
+	# on-disk metadata (pvmetadatacopies = 0). Or this can be in
+	# addition to on-disk metadata areas.
+	# The feature was originally added to simplify testing and is not
+	# supported under low memory situations - the machine could lock up.
+	# Never edit any files in these directories by hand unless you
+	# you are absolutely sure you know what you are doing! Use
+	# the supplied toolset to make changes (e.g. vgcfgrestore).
+	# Example:
+	# dirs = [ "/etc/lvm/metadata", "/mnt/disk2/lvm/metadata2" ]
+	# This configuration option is advanced.
+	# This configuration option does not have a default value defined.
+	# dirs = []
+# }
+
+# Configuration section report.
+# LVM report command output formatting.
+# report {
+
+	# Configuration option report/compact_output.
+	# Do not print empty report fields.
+	# Fields that don't have a value set for any of the rows
+	# reported are skipped and not printed. Compact output is
+	# applicable only if report/buffered is enabled.
+	# compact_output = 0
+
+	# Configuration option report/aligned.
+	# Align columns in report output.
+	# aligned = 1
+
+	# Configuration option report/buffered.
+	# Buffer report output.
+	# When buffered reporting is used, the report's content is appended
+	# incrementally to include each object being reported until the report
+	# is flushed to output which normally happens at the end of command
+	# execution. Otherwise, if buffering is not used, each object is
+	# reported as soon as its processing is finished.
+	# buffered = 1
+
+	# Configuration option report/headings.
+	# Show headings for columns on report.
+	# headings = 1
+
+	# Configuration option report/separator.
+	# A separator to use on report after each field.
+	# separator = " "
+
+	# Configuration option report/list_item_separator.
+	# A separator to use for list items when reported.
+	# list_item_separator = ","
+
+	# Configuration option report/prefixes.
+	# Use a field name prefix for each field reported.
+	# prefixes = 0
+
+	# Configuration option report/quoted.
+	# Quote field values when using field name prefixes.
+	# quoted = 1
+
+	# Configuration option report/colums_as_rows.
+	# Output each column as a row.
+	# If set, this also implies report/prefixes = 1.
+	# colums_as_rows = 0
+
+	# Configuration option report/binary_values_as_numeric.
+	# Use binary values 0 or 1 instead of descriptive literal values.
+	# For columns that have exactly two valid values to report
+	# (not counting the 'unknown' value which denotes that the
+	# value could not be determined).
+	# binary_values_as_numeric = 0
+
+	# Configuration option report/devtypes_sort.
+	# List of columns to sort by when reporting 'lvm devtypes' command.
+	# See 'lvm devtypes -o help' for the list of possible fields.
+	# devtypes_sort = "devtype_name"
+
+	# Configuration option report/devtypes_cols.
+	# List of columns to report for 'lvm devtypes' command.
+	# See 'lvm devtypes -o help' for the list of possible fields.
+	# devtypes_cols = "devtype_name,devtype_max_partitions,devtype_description"
+
+	# Configuration option report/devtypes_cols_verbose.
+	# List of columns to report for 'lvm devtypes' command in verbose mode.
+	# See 'lvm devtypes -o help' for the list of possible fields.
+	# devtypes_cols_verbose = "devtype_name,devtype_max_partitions,devtype_description"
+
+	# Configuration option report/lvs_sort.
+	# List of columns to sort by when reporting 'lvs' command.
+	# See 'lvs -o help' for the list of possible fields.
+	# lvs_sort = "vg_name,lv_name"
+
+	# Configuration option report/lvs_cols.
+	# List of columns to report for 'lvs' command.
+	# See 'lvs -o help' for the list of possible fields.
+	# lvs_cols = "lv_name,vg_name,lv_attr,lv_size,pool_lv,origin,data_percent,metadata_percent,move_pv,mirror_log,copy_percent,convert_lv"
+
+	# Configuration option report/lvs_cols_verbose.
+	# List of columns to report for 'lvs' command in verbose mode.
+	# See 'lvs -o help' for the list of possible fields.
+	# lvs_cols_verbose = "lv_name,vg_name,seg_count,lv_attr,lv_size,lv_major,lv_minor,lv_kernel_major,lv_kernel_minor,pool_lv,origin,data_percent,metadata_percent,move_pv,copy_percent,mirror_log,convert_lv,lv_uuid,lv_profile"
+
+	# Configuration option report/vgs_sort.
+	# List of columns to sort by when reporting 'vgs' command.
+	# See 'vgs -o help' for the list of possible fields.
+	# vgs_sort = "vg_name"
+
+	# Configuration option report/vgs_cols.
+	# List of columns to report for 'vgs' command.
+	# See 'vgs -o help' for the list of possible fields.
+	# vgs_cols = "vg_name,pv_count,lv_count,snap_count,vg_attr,vg_size,vg_free"
+
+	# Configuration option report/vgs_cols_verbose.
+	# List of columns to report for 'vgs' command in verbose mode.
+	# See 'vgs -o help' for the list of possible fields.
+	# vgs_cols_verbose = "vg_name,vg_attr,vg_extent_size,pv_count,lv_count,snap_count,vg_size,vg_free,vg_uuid,vg_profile"
+
+	# Configuration option report/pvs_sort.
+	# List of columns to sort by when reporting 'pvs' command.
+	# See 'pvs -o help' for the list of possible fields.
+	# pvs_sort = "pv_name"
+
+	# Configuration option report/pvs_cols.
+	# List of columns to report for 'pvs' command.
+	# See 'pvs -o help' for the list of possible fields.
+	# pvs_cols = "pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free"
+
+	# Configuration option report/pvs_cols_verbose.
+	# List of columns to report for 'pvs' command in verbose mode.
+	# See 'pvs -o help' for the list of possible fields.
+	# pvs_cols_verbose = "pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,dev_size,pv_uuid"
+
+	# Configuration option report/segs_sort.
+	# List of columns to sort by when reporting 'lvs --segments' command.
+	# See 'lvs --segments -o help' for the list of possible fields.
+	# segs_sort = "vg_name,lv_name,seg_start"
+
+	# Configuration option report/segs_cols.
+	# List of columns to report for 'lvs --segments' command.
+	# See 'lvs --segments  -o help' for the list of possible fields.
+	# segs_cols = "lv_name,vg_name,lv_attr,stripes,segtype,seg_size"
+
+	# Configuration option report/segs_cols_verbose.
+	# List of columns to report for 'lvs --segments' command in verbose mode.
+	# See 'lvs --segments -o help' for the list of possible fields.
+	# segs_cols_verbose = "lv_name,vg_name,lv_attr,seg_start,seg_size,stripes,segtype,stripesize,chunksize"
+
+	# Configuration option report/pvsegs_sort.
+	# List of columns to sort by when reporting 'pvs --segments' command.
+	# See 'pvs --segments -o help' for the list of possible fields.
+	# pvsegs_sort = "pv_name,pvseg_start"
+
+	# Configuration option report/pvsegs_cols.
+	# List of columns to sort by when reporting 'pvs --segments' command.
+	# See 'pvs --segments -o help' for the list of possible fields.
+	# pvsegs_cols = "pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size"
+
+	# Configuration option report/pvsegs_cols_verbose.
+	# List of columns to sort by when reporting 'pvs --segments' command in verbose mode.
+	# See 'pvs --segments -o help' for the list of possible fields.
+	# pvsegs_cols_verbose = "pv_name,vg_name,pv_fmt,pv_attr,pv_size,pv_free,pvseg_start,pvseg_size,lv_name,seg_start_pe,segtype,seg_pe_ranges"
+# }
+
+# Configuration section dmeventd.
+# Settings for the LVM event daemon.
+dmeventd {
+
+	# Configuration option dmeventd/mirror_library.
+	# The library dmeventd uses when monitoring a mirror device.
+	# libdevmapper-event-lvm2mirror.so attempts to recover from
+	# failures.  It removes failed devices from a volume group and
+	# reconfigures a mirror as necessary. If no mirror library is
+	# provided, mirrors are not monitored through dmeventd.
+	mirror_library = "libdevmapper-event-lvm2mirror.so"
+
+	# Configuration option dmeventd/raid_library.
+	# raid_library = "libdevmapper-event-lvm2raid.so"
+
+	# Configuration option dmeventd/snapshot_library.
+	# The library dmeventd uses when monitoring a snapshot device.
+	# libdevmapper-event-lvm2snapshot.so monitors the filling of
+	# snapshots and emits a warning through syslog when the usage
+	# exceeds 80%. The warning is repeated when 85%, 90% and
+	# 95% of the snapshot is filled.
+	snapshot_library = "libdevmapper-event-lvm2snapshot.so"
+
+	# Configuration option dmeventd/thin_library.
+	# The library dmeventd uses when monitoring a thin device.
+	# libdevmapper-event-lvm2thin.so monitors the filling of
+	# a pool and emits a warning through syslog when the usage
+	# exceeds 80%. The warning is repeated when 85%, 90% and
+	# 95% of the pool is filled.
+	thin_library = "libdevmapper-event-lvm2thin.so"
+
+	# Configuration option dmeventd/executable.
+	# The full path to the dmeventd binary.
+	# executable = "/usr/sbin/dmeventd"
+}
+
+# Configuration section tags.
+# Host tag settings.
+# tags {
+
+	# Configuration option tags/hosttags.
+	# Create a host tag using the machine name.
+	# The machine name is nodename returned by uname(2).
+	# hosttags = 0
+
+	# Configuration section tags/<tag>.
+	# Replace this subsection name with a custom tag name.
+	# Multiple subsections like this can be created.
+	# The '@' prefix for tags is optional.
+	# This subsection can contain host_list, which is a
+	# list of machine names. If the name of the local
+	# machine is found in host_list, then the name of
+	# this subsection is used as a tag and is applied
+	# to the local machine as a 'host tag'.
+	# If this subsection is empty (has no host_list), then
+	# the subsection name is always applied as a 'host tag'.
+	# Example:
+	# The host tag foo is given to all hosts, and the host tag
+	# bar is given to the hosts named machine1 and machine2.
+	# tags { foo { } bar { host_list = [ "machine1", "machine2" ] } }
+	# This configuration section has variable name.
+	# This configuration section does not have a default value defined.
+	# tag {
+
+		# Configuration option tags/<tag>/host_list.
+		# A list of machine names.
+		# These machine names are compared to the nodename
+		# returned by uname(2). If the local machine name
+		# matches an entry in this list, the name of the
+		# subsection is applied to the machine as a 'host tag'.
+		# This configuration option does not have a default value defined.
+		# host_list = ""
+	# }
+# }
diff --git a/srcpkgs/mkinitcpio/files/lvm2_hook b/srcpkgs/mkinitcpio/files/lvm2_hook
new file mode 100644
index 0000000000..65de7bd2fd
--- /dev/null
+++ b/srcpkgs/mkinitcpio/files/lvm2_hook
@@ -0,0 +1,12 @@
+#!/usr/bin/ash
+
+run_earlyhook() {
+    mkdir /run/lvm
+    lvmetad
+}
+
+run_cleanuphook() {
+    kill $(cat /run/lvmetad.pid)
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
diff --git a/srcpkgs/mkinitcpio/files/lvm2_install b/srcpkgs/mkinitcpio/files/lvm2_install
new file mode 100644
index 0000000000..49430074fb
--- /dev/null
+++ b/srcpkgs/mkinitcpio/files/lvm2_install
@@ -0,0 +1,34 @@
+#!/usr/bin/bash
+
+build() {
+    local mod
+    for mod in dm-mod dm-snapshot dm-mirror dm-cache dm-cache-mq; do
+        add_module "$mod"
+    done
+
+    add_binary "/usr/bin/lvm"
+    add_binary "/usr/bin/lvmetad"
+    add_binary "/usr/bin/dmsetup"
+    add_binary "/usr/bin/cache_check"
+    add_binary "/usr/bin/cache_dump"
+    add_binary "/usr/bin/cache_metadata_size"
+    add_binary "/usr/bin/cache_repair"
+    add_binary "/usr/bin/cache_restore"
+    add_file "/usr/lib/udev/rules.d/10-dm.rules"
+    add_file "/usr/lib/udev/rules.d/13-dm-disk.rules"
+    add_file "/usr/lib/udev/rules.d/95-dm-notify.rules"
+    add_file "/usr/lib/udev/rules.d/11-dm-lvm.rules"
+    add_file "/usr/lib/initcpio/udev/69-dm-lvm-metad.rules" "/usr/lib/udev/rules.d/69-dm-lvm-metad.rules"
+    add_file "/usr/lib/initcpio/udev/11-dm-initramfs.rules" "/usr/lib/udev/rules.d/11-dm-initramfs.rules"
+    add_file "/usr/lib/initcpio/conf/lvm.conf" "/etc/lvm/lvm.conf"
+
+    add_runscript
+}
+
+help() {
+  cat <<HELPEOF
+This hook enables LVM2 volumes in initramfs.
+HELPEOF
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
diff --git a/srcpkgs/mkinitcpio/files/mdadm_hook b/srcpkgs/mkinitcpio/files/mdadm_hook
new file mode 100644
index 0000000000..5371baacaa
--- /dev/null
+++ b/srcpkgs/mkinitcpio/files/mdadm_hook
@@ -0,0 +1,49 @@
+#!/usr/bin/ash
+
+run_hook() {
+    local i= mdconfig=/etc/mdadm.conf
+
+    # for partitionable raid, we need to load md_mod first!
+    modprobe md_mod 2>/dev/null
+
+    if [ -n "$md" ]; then
+        echo 'DEVICE partitions' >"$mdconfig"
+        for i in $(cat /proc/cmdline); do
+            case $i in
+                # raid
+                md=[0-9]*,/*)
+                    device=${i%%,*}
+                    device=${device/=/}
+                    array=${i#*,}
+                    echo "ARRAY /dev/$device devices=$array"
+                    ;;
+                # partitionable raid
+                md=d[0-9]*,/*)
+                    device=${i%%,*}
+                    device=${device/=/_}
+                    array=${i#*,}
+                    echo "ARRAY /dev/$device devices=$array"
+                    ;;
+                # raid UUID
+                md=[0-9]*,[0-9,a-fA-F]*)
+                    device=${i%%,*}
+                    device=${device/=/}
+                    array=${i#*,}
+                    echo "ARRAY /dev/$device UUID=$array"
+                    ;;
+                # partitionable raid UUID
+                md=d[0-9]*,[0-9,a-fA-F]*)
+                    device=${i%%,*}
+                    device=${device/=/_}
+                    array=${i#*,}
+                    echo "ARRAY /dev/$device UUID=$array"
+                    ;;
+            esac
+        done >>"$mdconfig"
+    fi
+
+    # assemble everything
+    [ -s "$mdconfig" ] && /usr/bin/mdassemble
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
diff --git a/srcpkgs/mkinitcpio/files/mdadm_install b/srcpkgs/mkinitcpio/files/mdadm_install
new file mode 100644
index 0000000000..7390509fab
--- /dev/null
+++ b/srcpkgs/mkinitcpio/files/mdadm_install
@@ -0,0 +1,46 @@
+#!/bin/bash
+
+build() {
+    add_checked_modules -f 'dm-' 'drivers/md/*'
+
+    # check if a custom mdadm.conf exists
+    if grep -q ^ARRAY /etc/mdadm.conf; then
+        echo "Custom /etc/mdadm.conf file will be used in initramfs for assembling arrays."
+        add_file "/etc/mdadm.conf"
+    fi
+    add_binary "/usr/bin/mdassemble"
+    add_file "/usr/lib/udev/rules.d/63-md-raid-arrays.rules"
+
+    add_runscript
+}
+
+help() {
+  cat <<HELPEOF
+This hook loads the necessary modules for any raid root device,
+and assembles the raid device when run.
+
+If arrays are defined in /etc/mdadm.conf, the file will be used instead
+of command line assembling.
+
+Command Line Setup:
+- for raid arrays with persistent superblocks:
+  md=<md device no.>,dev0,dev1,...,devn
+  md=<md device no.>,uuid
+- for partitionable raid arrays with persistent superblocks:
+  md=d<md device no.>,dev0,dev1,...,devn
+  md=d<md device no.>,uuid
+
+Parameters:
+- <md device no.> = the number of the md device: 
+  0 means md0, 1 means md1, ...
+- <dev0-devn>: e.g. /dev/hda1,/dev/hdc1,/dev/sda1,/dev/sdb1
+                 or 0900878d:f95f6057:c39a36e9:55efa60a
+Examples:
+- md=d0,/dev/sda3,/dev/sda4 md=d1,/dev/hda1,/dev/hdb1
+  This will setup 2 md partitionable arrays.
+- md=0,/dev/sda3,/dev/sda4 md=1,/dev/hda1,/dev/hdb1
+  This will setup 2 md arrays with persistent superblocks.
+HELPEOF
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
diff --git a/srcpkgs/mkinitcpio/files/mdadm_udev_install b/srcpkgs/mkinitcpio/files/mdadm_udev_install
new file mode 100644
index 0000000000..c01cbaf249
--- /dev/null
+++ b/srcpkgs/mkinitcpio/files/mdadm_udev_install
@@ -0,0 +1,25 @@
+#!/bin/bash
+
+build() {
+    add_checked_modules -f 'dm-' 'drivers/md/*'
+
+    # check if a custom mdadm.conf exists
+    if grep -qw ^ARRAY "$BASEDIR/etc/mdadm.conf"; then
+        echo "Custom /etc/mdadm.conf file will be used in initramfs for assembling arrays."
+        add_file "/etc/mdadm.conf"
+    fi
+
+    add_binary "/usr/bin/mdadm"
+    add_file "/usr/lib/udev/rules.d/63-md-raid-arrays.rules"
+    add_file "/usr/lib/udev/rules.d/64-md-raid-assembly.rules"
+}
+
+help() {
+  cat <<HELPEOF
+This hook loads the necessary modules for a RAID array and uses incremental
+assembly via udev at runtime to create the devices. This hook will NOT work
+without the udev hook included on the image.
+HELPEOF
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
diff --git a/srcpkgs/mkinitcpio/files/udev_hook b/srcpkgs/mkinitcpio/files/udev_hook
new file mode 100644
index 0000000000..75da7e4a84
--- /dev/null
+++ b/srcpkgs/mkinitcpio/files/udev_hook
@@ -0,0 +1,20 @@
+#!/usr/bin/ash
+
+run_earlyhook() {
+    udevd --daemon --resolve-names=never
+    udevd_running=1
+}
+
+run_hook() {
+    msg ":: Triggering uevents..."
+    udevadm trigger --action=add --type=subsystems
+    udevadm trigger --action=add --type=devices
+    udevadm settle
+}
+
+run_cleanuphook() {
+    udevadm control --exit
+    udevadm info --cleanup-db
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
diff --git a/srcpkgs/mkinitcpio/files/udev_install b/srcpkgs/mkinitcpio/files/udev_install
new file mode 100644
index 0000000000..610b71c3d0
--- /dev/null
+++ b/srcpkgs/mkinitcpio/files/udev_install
@@ -0,0 +1,27 @@
+#!/bin/bash
+
+build() {
+    add_file "/etc/udev/udev.conf"
+    add_binary /usr/bin/udevd
+    add_binary /usr/bin/udevadm
+
+    for rule in 50-udev-default.rules 60-persistent-storage.rules 64-btrfs.rules 80-drivers.rules; do
+        add_file "/usr/lib/udev/rules.d/$rule"
+    done
+
+    for tool in ata_id scsi_id; do
+        add_file "/usr/lib/udev/$tool"
+    done
+
+    add_runscript
+}
+
+help() {
+    cat <<HELPEOF
+This hook will use udev to create your root device node and detect the needed
+modules for your root device. It is also required for firmware loading in
+initramfs. It is recommended to use this hook.
+HELPEOF
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
diff --git a/srcpkgs/mkinitcpio/patches/avoid-compound-conditional-leading-to-spurious-error.patch b/srcpkgs/mkinitcpio/patches/avoid-compound-conditional-leading-to-spurious-error.patch
new file mode 100644
index 0000000000..c1371fd324
--- /dev/null
+++ b/srcpkgs/mkinitcpio/patches/avoid-compound-conditional-leading-to-spurious-error.patch
@@ -0,0 +1,39 @@
+From ea4c4154205372154457c794513ae46b61ea4e4c Mon Sep 17 00:00:00 2001
+From: Dave Reisner <dreisner@archlinux.org>
+Date: Mon, 4 Aug 2014 08:31:37 -0400
+Subject: [mkinitcpio] [PATCH] avoid compound conditional leading to spurious
+ "errors"
+
+As seen:
+
+https://bbs.archlinux.org/viewtopic.php?id=185204
+https://bbs.archlinux.org/viewtopic.php?id=185265
+---
+ functions | 8 ++++++--
+ 1 file changed, 6 insertions(+), 2 deletions(-)
+
+diff --git a/functions b/functions
+index 20bbffe..362d07b 100644
+--- a/functions
++++ b/functions
+@@ -423,11 +423,15 @@ add_full_dir() {
+ 
+         for f in "$1"/*; do
+             if [[ -L $f ]]; then
+-                [[ $f = $filter ]] && add_symlink "$f" "$(readlink "$f")"
++                if [[ $f = $filter ]]; then
++                    add_symlink "$f" "$(readlink "$f")"
++                fi
+             elif [[ -d $f ]]; then
+                 add_full_dir "$f"
+             elif [[ -f $f ]]; then
+-                [[ $f = $filter ]] && add_file "$f"
++                if [[ $f = $filter ]]; then
++                    add_file "$f"
++                fi
+             fi
+         done
+     fi
+-- 
+2.1.0
+
diff --git a/srcpkgs/mkinitcpio/patches/default-to-runit-init.patch b/srcpkgs/mkinitcpio/patches/default-to-runit-init.patch
new file mode 100644
index 0000000000..a1a89d03a2
--- /dev/null
+++ b/srcpkgs/mkinitcpio/patches/default-to-runit-init.patch
@@ -0,0 +1,25 @@
+From 6a100b4a4a709f177f383988079a2a3c3ada08b8 Mon Sep 17 00:00:00 2001
+From: Andrea Brancaleoni <miwaxe@gmail.com>
+Date: Thu, 25 Jun 2015 01:59:58 +0200
+Subject: [PATCH] default to runit-init
+
+---
+ init | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/init b/init
+index 4891ed8..7534d23 100644
+--- a/init
++++ b/init
+@@ -2,7 +2,7 @@
+ 
+ udevd_running=0
+ mount_handler=default_mount_handler
+-init=/sbin/init
++init=/usr/bin/runit-init
+ rd_logmask=0
+ 
+ . /init_functions
+-- 
+2.4.4
+
diff --git a/srcpkgs/mkinitcpio/template b/srcpkgs/mkinitcpio/template
new file mode 100644
index 0000000000..f82a6c08aa
--- /dev/null
+++ b/srcpkgs/mkinitcpio/template
@@ -0,0 +1,67 @@
+# Template file for 'mkinitcpio'
+pkgname=mkinitcpio
+version=18
+revision=1
+noarch=yes
+build_style=gnu-makefile
+depends="busybox-static bsdcpio"
+short_desc="Next generation of initramfs creation"
+maintainer="Andrea Brancaleoni <miwaxe@gmail.com>"
+license="GPL-2"
+homepage="https://wiki.archlinux.org/index.php/Mkinitcpio"
+distfiles="https://sources.archlinux.org/other/$pkgname/$pkgname-$version.tar.gz"
+checksum=187bdeeade08996010fbff480ccc91e47722d275c22fd6feb4a4b63061e9fc22
+
+conf_files="/etc/mkinitcpio.conf"
+
+patch_args="-Np1"
+
+post_install() {
+	ln -s /usr/bin/busybox.static $DESTDIR/usr/lib/initcpio/busybox
+
+	vinstall ${FILESDIR}/kernel-hook-postinst 755 etc/kernel.d/post-install 20-mkinitcpio
+	vinstall ${FILESDIR}/kernel-hook-postrm 755 etc/kernel.d/post-remove 20-mkinitcpio
+}
+
+mkinitcpio-udev_package() {
+	depends="${sourcepkg}>=${version}_${revision} eudev"
+	short_desc+=" - udev support"
+	pkg_install() {
+		vinstall ${FILESDIR}/udev_hook 644 usr/lib/initcpio/hooks udev
+		vinstall ${FILESDIR}/udev_install 644 usr/lib/initcpio/install udev
+	}
+}
+
+mkinitcpio-lvm2_package() {
+	depends="${sourcepkg}>=${version}_${revision} lvm2 thin-provisioning-tools"
+	short_desc+=" - lvm2 support"
+	conf_files="/usr/lib/initcpio/conf/lvm.conf"
+	pkg_install() {
+		vinstall ${FILESDIR}/lvm2_hook 644 usr/lib/initcpio/hooks lvm2
+		vinstall ${FILESDIR}/lvm2_install 644 usr/lib/initcpio/install lvm2
+		for RULES in ${FILESDIR}/*.rules; do
+			vinstall $RULES 644 usr/lib/initcpio/udev $(basename $RULES)
+		done
+		vinstall ${FILESDIR}/lvm.conf 644 usr/lib/initcpio/conf
+	}
+}
+
+mkinitcpio-encrypt_package() {
+	depends="${sourcepkg}>=${version}_${revision}
+		${sourcepkg}-lvm2>=${version}_${revision} cryptsetup"
+	short_desc+=" - encrypt support"
+	pkg_install() {
+		vinstall ${FILESDIR}/encrypt_hook 644 usr/lib/initcpio/hooks encrypt
+		vinstall ${FILESDIR}/encrypt_install 644 usr/lib/initcpio/install encrypt
+	}
+}
+
+mkinitcpio-mdadm_package() {
+	depends="${sourcepkg}>=${version}_${revision} mdadm"
+	short_desc+=" - mdadm support"
+	pkg_install() {
+		vinstall ${FILESDIR}/mdadm_hook 644 usr/lib/initcpio/hooks mdadm
+		vinstall ${FILESDIR}/mdadm_install 644 usr/lib/initcpio/install mdadm
+		vinstall ${FILESDIR}/mdadm_udev_install 644 usr/lib/initcpio/install mdadm_udev
+	}
+}